Guys you are really the best when it comes on to epoxy tutorials thanks a million

You guys are amazing! I have have been to two certifications classes. 1 in Fl and 1 in IL. I have learned way more just by watching your videos. Thank you.

Would you guys do an example that compares the matte and glossy topcoats side by side to show how each changes the look of the floors?

Hello friends, greetings from Venezuela. I have a question, yesterday I finished applying epoxy resin to a concrete counter, but today about 2 bubbles appeared on one main edge. Should I sand to eliminate those bubbles and very delicately and subtly inside the hole that will remain, I apply epoxy resin again??? It would be perfect. Or should I apply a full coat to the countertop? Please help...thanks in advance..

First time I used one of those sanders back in the day I blasted a hole in the wall.

I just got my epoxy floor done. The company could have been better. I came to her to confirm if those chucks and pieces were typical. It seems like they are when you don't sand. So now, I have to go behind them and sand for myself. I should have followed my first instinct and done it myself. Plus, I don't want to damage it. What about hairs? Would sanding help with that? Thanks guys!

Love your guys stuff! Definitely professional applicators on your crew! Do you have epoxy that can be shower walls?

Would the repairs look the same with high gloss top coat?

Muito bonito esse trabalho, uma obra de arte.!!!

Overhead door with crumbs of dirt on it got me

I would like to use this floor kit on a kitchen counter top. Is this possible? What other things do I need to buy?

Great video. Where are you guys located?

Now we have cráp in our Floor" 😂😂

If I haven’t hit the top coat I have a little piece of the foam from the roller that dried I wanna clip it off it’s a little Lump

Great video

Very usefull video Thanks guys 👍👍

amazing

Hello it’s been a year since I used your product to do my kitchen counter. I need to know how to fix these. Little dried up holes in the epoxy and a burnt spot, then small chips on the edges of counter. How do I fix these problems. Thanks 😊

When is your next training class available ? I'm very interested. !!

Matte is like looking at a floor that needs a good mopping. Glossy is the way to go

What about Pin Holes in the Epoxy Basecoag when it’s dry? How do you repair that?

👍 Ребята Вы молодцы!

How long after the epoxy can you start sanding?

Could you do the same thing if you have some spots that are cured all the way and some spots that are not?

@leggari products Is it possible to add more veins to a white epoxy metallic floor after the fact? My wife is not happy at all with the minimum veins our floor guy put in. I can send you photos.

Good very very nice..👍👍

Muito essencial para um ambiente.

So you can't just do the spots? You have to do the entire floor or area? We had just a couple spots......bug and just weird small spots. Can I just sand those small spots and use the JB weld epoxy kit with the same resin powder?

Holy shit. I must be a natural. I've only poured a few sample pieces all came out perfect but my first time doing it on a project, a coffee table and I got uneven edges and over sanded and got some of the wood showing through the epoxy and just tried hitting those spots with the sharpie just like dude did it, little dabs and rub it in then did a clear coat with some color accents and those spots blended in perfect . I learned the hard way no matter how many perfect pours you do you can't get cocky and push things, my problem is I keep messing with the design. Cause every time I look at it I see something new that could look better or I question myself if the smallest details that Noone would ever notice but I do cause I'm examining my work so sometimes I push the working time to the last possible work time minutes.j guess my luck ran out.. trust your work and don't second guess yourself is the lesson I learned

What is the process to fix the WB Polyurethene topcoat if it dried with some streaks and blotches? Just got done with a floor kit and used a gloss WB with grit additive. Its a little cloudy and we want to give it that shine as the final result!

I have a question do yall experince aid pockets

can you lay an epoxy flooring over MDF subfloor

Our cat went on our floor while it was being worked on ( before applying the sealer ) he said he had to redo the whole floor ?? We didn’t want thta sixne it had already taken over 4 days to fe tour floor done . Are you telling me he could have fix just that little spot where the 4 paw prints were left ?

Can your products be used on aircrete ?

I do get this spots when i do coats , problem is it gets in second or third coat which should be my final coat.. what should i do on such situation without doing another coat.. i tried sanding those out with 180 but it didn't get off and yes there is also a fear of wood getting exposed so i dont want to sand that hard

If I sand my metallic coat can I ad a clear coat of epoxy for top coat dose it come shiny I have small bubbles everywhere that’s why I want to sand the floor but I want shiny finish

Hi how can I get some in Israel

I already have epoxy floor, can you go over and redo epoxy ?

Love ❤👄👄