I think the white Lotus from The Spy Who Loved Me would be a better fit for a Lego version due to it’s sharp lines and angles. Fingers crossed we get one of those too. Imagine a Creator Expert version that can convert to submarine mode as well. 🤞🏻

Simply amazing design... there is so much potential with LEGO's 8-wide vehicles so it is great to seem them branch out even further... my dream set would be an 8-wide VW bus 😊

Speed champions are killing it with their car sets. If they are doing more famous cars, I hope they make KITT from Knight Rider.

As much as I love the Creator Expert version for the build/gadget functions, this smaller variation is all around closer to the mark. Only real noticeable discrepancy as mentioned are the fender flares nowhere present on the actual car. Other than that for as simple as it looks, still features some mind blowing techniques/unusual parts usage throughout the build. Definitely excited to add this one and the Charger RT to the 8 wide collection. Side note/ Kitt would also be an awesome choice for this new line.

After what Christopher Stamp said in his presentation I now made up my mind that among the next movie icons there has to be the Lotus Esprit. Not sure if a Wet Nellie conversion is really neccessary, but the basic shape of the Giugiaro Esprit is so iconic and lends itsself to brick building that the choice should be obvious.

As a bond fan, it is a must buy! I think it looks great too and it’s good to finally get an official James bond minifigure

One little detail I like about this set is that it comes with a little piece that looks like a handgun as an extra piece so you can give Bond a ranged weapon. I don't know if they planned that or if it was just a happy coincidence.

I think this is the speed champions set I’ve looked forward to the most

This is truly an elegant car, a must buy for James Bond fans I dare say!

The only similar building technique that I can remember is the one used for the stairs in the architecture trafalgar square.

the strange thing is that the color on the back window piece on the car shown in the interview with the designer looks to match better with the rest of the car than the set you just build. (or is that just the lighting) I do like the 2 new cars. thanks again for your great video

Dude yes KITT!

Absolutely a stunning build. Thanks for the in-depth breakdown of the build! I’m definitely buying this now!!

As usual relly great and detailed review > THANKS so much !!! Designers pushed a step further with this model I think. You pointed out the 2 things that are still desappointing (even more with the new price point 25$) : background grey color sticker + color gap for print roof ! I was not at all into speed champions collection but started with iconic / vintage car like the Ford GT Gulf or Countach

Nice review, thank you! I personnaly think 2022 will be remembered as a wonderful transition year for Speed Champions. Lots of models with new construction methods. The variety will be a challenge to follow in the coming years I am sure. I want them all and I enjoy building them...

A note about the stickers: I bought this set yesterday and the stickers are a perfect match in colour to the grey pieces. It looks like the colour issues may hopefully be limited to the initial run of sets or the pre-production copies sent to reviewers.

This is honestly my favorite speed champions set ever!!!!

For the hood scoop technique, I believe that LEGO used something similar for the stairs in the Architecture Trafalgar Square.

Probably the first one of these cars that I’ll sticker up. Most I’ve bought just to get extra parts and check out the techniques used. I want that read window without prints. It looks like it could make a good cockpit dome for a ship.

That hood scoop design is super unique. The only other set I can think of that uses a similar technique is The Mandalorian Brickhead figure. The front parts of his helmet aren't connected by studs but are instead slid into place and then held on by other bricks built over them. Not exactly the same but pretty similar

Great video and overview... I'm definitely impressed, and interested to see what the rest of the series brings... I'd like to have seen a few more printed pieces instead of stickers and maybe a set of swappable/alternative machine gun headlights though

Speed champions are my favorite sets in terms of building experience, and as much as i love star wars, speed champions have great piece usage, clever connections and satisfying curves. Definitely picking up this one, would look perfect on my display.

Thanks for the detailed looks at the new pieces! Makes it eaasy to add them to LDraw!

That interview was awesome

You can see that the stickers aren’t matching the color of the lego bricks unfortunately, seems to be the case in a lot of sets nowadays. Other than that, I think this is a great tiny set, seems like this is closer to a die cast model than a lego model! Truly remarkable! Love seeing your reviews, keep up the incredible work.

Great video! I can't wait til it arrives later tonight!

so many amazing techniques and parts! its awesome!

This is the set I was looking for this whole entire time!

Oh my god, the building techniques are getting crazier each year, and im here for it, it looks awesome

Smokey and the bandit Firebird would be really cool

Yep, very impressive. Can´t wait to see other movie cars. Thank you!

Awesome. As a collector of both Lego and James Bond memorabillia I'm stoked. I'll definitely be getting the DB5 to go along with my large scale Lego model and all of my Corgi DB5's.

I already have the large db5, but I can't wait to ad this one to the collection.

Great review!!

Amazing build! Lego are making absolutely amazing things with Speed Champions, and this is one I think I have to get. Seeing as they've branched out to Bond and Aston's, I would LOVE to see them do the 1985 V8 Vantage from The Living Daylight that we saw returning in No Time Die, my favorite Bond car!

I genuinely can’t wait for this

Wow, I wasn't really interested in this, but seeing how it's built and the end result definitely got me excited :D

Amazing video!

So jealous of you right now, lol! My son and I can't wait to build this one so thx for the vid and keep them up!

I was amazed my 5 year old could build this, it would have done my head in. It looks amazing but breaks very easily (and complicatedly). Also Bond has a cool little gun as well as the weird spanner.

Great review!

I cant wait to get my hands on this bad boy

Fantastic model! Great review!

Wish they'd do a Lotus Esprit from For Your Eyes Only , would be awesome

The new rear Window Piece is going be awesome for making 1940s and early 1950s era Cars that slope is perfect for making cars like Higher End Chryslers and Cadillacs.

I need to buy this. I saw Goldfinger as a 13 year old in 1968 for the first time. Admission restrictions, you know. That car!!!

It is such a great looking model for such smaller scale.

For the “loose assembly” of the hood scoop, there is a similar technique used to shape the wheel wells of the flying ford anglia in the “75968 Number 4 privet drive” set. It’s not quite as complicated but it uses the same general idea.

A lot of fantastic speed Champions out there since they made the switch to 8 stud.

The detail next to the steering wheel is a concealed map which links into a tracking device bond has.

Like it was said in the video I like the addition of movie cars to the speed champions line. I know there are a lot of movies with iconic cars but I would really love to see Smoky and the Bandit Trans Am or the GMC van from the A-Team.

Thnks for bring us this so quickly after the interview, u rock, now we saw Optimus Prime (amazing) I would like to see transformers movie cars in SC form, bumblebee camaro and lots of autobots and decepticons.

Awesome 👏 and great 😊 too enjoyed it a lot keep up good on your KZfaq videos channel

These 2 look great

For anyone who wants to add B pillars for the car, get a light bluish gray strip sticker and place it on that rear window piece if you plan to make it as a moc build

Wow! Waiting for F&F👍🏼

I have just finished building mine. Took me about 2 hrs to build. I can't believe this ended up looking better than the much larger Creator DB5. I think if Lego re-did the Creator DB5, maybe do a V2, it would probably look just as good as this one and with the same working gadgets of course.

LEGO also has the licence to produce this and the Fast and Furious so no real surprise about this. Definite purchase for me. Now they should do James Bond's Lotus :D

This is freakin awesome

I love it!

Looks better than the big one. And I would totally support an 8-wide KITT

The coolest part as we see in the movie is the headlights of the DB5 has machine guns in it in No Time to Die

I think at this point, Lego should start up a 007 theme. Maybe it will do as well as the Star Wars theme. Maybe they’ll even make their own 007 Lego game?

Looks cool

This will be my first speed champions car, it is not perfect, but it is good enough for scale) I like that it is in minifigure scale.

Very nice design !!!

Absolutely love it, if there was on criticism for it is that Lego still hasn't figured out how to do printed pieces that are the same color as the Lego pieces as that glass print grey isn't quite the same color as the rest of the body.

Great, i have the bigher One and might get this

Damn Movie Cars in Speed Champions is pretty sick! Now i need a 67‘ Impala with the Winchesters

i love it how they made curves a more things but one important thing is missing and when its not there its destroying the look of the car that things are mirrors above bumpers

I will definetly buy this

I wish lego released more speed Champions sets per year. Need more movie cars! Like a Delorean!

I looks so much larger then it is due to all the details in it I am definitely getting it day one

This is really nice

I’ve seen something similar to the hood technique on the pyramid of Giza set. The stairs on the front are made with similar pieces.

Masterpiece

5:07 something similar was used for the stairs in the Trafalgar square set

I would absolutely LOVE if Lego Made an ECTO-1 Speed Champions

Are there any lego sets with more over the top design and so crazy connections? Speed champions builds are consistently suprising for me.

I think the closest that comes to the technique that is used for the scoop, are the stares in some of the Architecture sets. (London square, great Pyramid).

The design is great as it is for Speed Champions in general, and I could live with the color of the stickers being off by just not applying them. But the color of the print on the canopy is so far off the color of the rest of the car it looks like a convertible to me. Which in the end makes this set a "thank you, but no" for me.

Aside from a few imperfections I actually like the Speed Champions version better. It feels more "rounded" for lack of a better word.

Very cool 😎

Can't believe these stickers. LEGO is sick.

This DB5 and the Dodge charger looks beautiful but I hope Chris can make more suv in their speed champions lineup or make a new lineup like the latest defender 110, Aston Martin DBX, Ranger rover. Land cruiser 300.

@RacingBrick, great video! Do you still expect one last Speed Champions set, 76913, for this year?

I think this is by far the best speed champions set that came out recently. Just think about the 8 (!) spare 1x3 silver plates. I think this one will blow up in the MOC market soon enough

My favorites it's Lego Speed Champions 2022 8+ 76911 007 Aston Martin DB5 Set

Hope they keep on making iconic movie cars. Wish too see mk4 supra GTR and a wrx

It's about the same price as the other individual sets, $20. As for the confirmation date IT IS confirmed that it will be released on the 1st of this coming august.

im really curious on whether we would get 4 seater vehicles like sedans, vans, etc. i believe it might need a new base plate for sure but really interested in that route!

I want the van from A-team !!!

Love it I hope Lego do Maserati mc20

Can't wait for a Speed Champions Mach 5

Fantastic set. I will love to see a Blade Runner's spinner on speed champion... :D it will be a great challenge for Chris

I'm sure the 007 and TFATF sets will be big sellers. I hope that prompts Lego to licence more IP-related Speed Champion sets, including the Knight Rider one you referred to.

I think it looks better than the big one. I'm actually tempted to get one.

love the vid my only comment is most our cars over here have the handbrake still in the middle it's only certain ones that are on the outside of the driver

I want it so bad!

I don't really like the large-scale vehicules like the Ecto-1, the DeLorean or the James Bond's Aston Martin. They are just display pieces without life has they don't have matching scaled figs. But I love the minifig scale vehicules, such as the ones i mention above or the Classic Batmobile, it's so much fun to see these vehicules and characters interact with each others, like in Lego Dimension. So, James Bond in this scale ? Speed Champions theme possibly taking care of others famous vehicules ? I take it ! Some building technic are mindblowing. One downside is the stickers, this bluish grey color is really ugly. If I put the stickers, I think I will cut out just the small needed detail and leave out the large gray areas. Thanks for the review, and the very interesting interview you did with the designer !