How to remove a Leica M6 top plate for service and repair.
Пікірлер: 19
@mijadaster4 жыл бұрын
Thank you so much for this and all the other videos that you post. Had to clean the inside of the viewfinder window, there was a little haze and it makes so much difference now that it's clean. Very helpful!!!
@cheltennf2 жыл бұрын
Finally a video that shows how to remove the film rewind lever! thanks for the paper towel pro tip.
@ton19114 жыл бұрын
I'm glad I found this post. Thanks for putting it up. Now I feel more empowered to fix my M6 and M4 myself. Now it's a matter of getting the tools form eBay and diving in. Thanks again. This is gold. Oh by any chance you could do a tutorial for calibrating the rangefinder?
@accuracybyvolume5332 жыл бұрын
My top plate was loose and all I wanted to do was tighten it up. This was perfect. I didn’t even have to take the wind lever off completely to tighten it up. Thank you.
@popcorpovo12 жыл бұрын
Thanks. Would be nice to see more of the M6 disassembly.
@qrubmeeaz10 жыл бұрын
Thanks so much! Great help.
@doctorwhoish8769Ай бұрын
hey man, do you know how to fix flash sync delay on the M6 Ti? sometimes it works, sometimes it doesn't fire at all or fire after a few seconds
@dksamurai12 жыл бұрын
Thanks for posting a very useful video. Do you know how the M6 TTL differs from the regular M6? Especially on how to remove the shutter speed dial?
@changelivesimages10 жыл бұрын
John, I trying to understand how ur modified tool work on turning the vertical alignment . Why need a notch at the tool . Would a flat head 1mm into the hole work?
@penciljack722311 жыл бұрын
Thanks, would like to know about the lens. very useful video.
@fzisland8010310 жыл бұрын
Hi John, my M6 top plate is loose at the viewfinder end, so if I follow your instruction by removing the rewind knob and then tightening the screw below it, I could fix the problem? Thanks!
@artby2wenty6 жыл бұрын
Couldn't even get the rewind knob off. When I held the inside part it just removed that. Tried to loosen the flat head on top of the winder and it just ended up breaking the screw driver.
@okan809611 жыл бұрын
thank you for the video! i'm trying to find the copper wrences but they are nowhere to find :( i'm in germany :)
@louisbrown0812 жыл бұрын
cant you just take of the red dot for vertical alignment?
@zhemin11 жыл бұрын
Hey, cool video, which supplier did you buy the clamps from, they seem to be alot higher quality then the Ebay ones. Thanks
@skelligvideo5 жыл бұрын
Hi John, I had to do the very task many times over the years during my time as a photo journalist. I had trouble with the rewinder, it came loose twice a year. the two screws inside would not hold. I´m just wondering, did you ever had any experience with the white dot on the curtain for the light meter. Mine has faded and the metering is basically wrong. Any idea how to fix this? Repainting?
@gverolla11 жыл бұрын
hello, I live in Italy, are looking for the rewind crunk silver gray for the M6, you may indicate some online retailer that sells it affordable? the only two I've found are in the U.S. and sell it at the price of 120 €! thanks
@rafael553 жыл бұрын
Now all I need is a chrome top plate without bubbling. Anyone know where I can find a good used one?
@aardoso Жыл бұрын
Do you know what type of washers the camera uses? Been trying to find out 🥲