Cheers mate!

I keep forgetting I can record thermal image video on my phone so I don't need to point the camera at the phone. Maybe next time lol!

@@JonnyFix I just bought a DEPSTECH Dual Lens Endoscope. Awesome piece of equipment. Great having 2 cameras, especially for looking down engine bores. It has a quality recording feature as well. I'm using it more and more & make it a regular tool in my classes.

Thanks! Appreciate the comment :)

10uF is a good start for main line caps. Once it's working you can measure the voltage at that point to know what rated cap to put in there, physical size plays a part as well. If say a 20V line you wouldn't put a 20V cap, you'd use say 36V. A 5V line would be better off with a 10V one instead of 6V. Often as you know it makes no difference leaving it off. If you had to remove 2 bad caps on same line then yes replace them. Only time you might notice it is if a cpu, ram or gpu line and the machine is running at 100% like in gaming it might show as random crashing or image glitching but that would be an extreme case. But on the general 5V or 3V line they aren't as critical in my opinion. Thanks for watching!

@@JonnyFix Some good points regarding what voltage rating to use, noted! Feel a bit silly I didn't think to measure the line after to see what voltage it was, next time I'll do that, thanks for the info :)

Yeah I did wind it up a bit

They're definitely available, I'm just a cheap skate. The battery sure lasts 3 times longer than the old camera so I'll pop it on charge between vids. Might need a psu when I launch my hot tub streaming career 🤣

Ugh I have the same model with the same problem that just occurred last night and I left with nothing to do :(

@@Mhndr101 ok. Finally after everything checking I had to change the motherboard. The motherboard i brought from ebay by £140 and £100 for repair cost. I had used local repair shop as lenovo customer service was demanding ridiculous overcharged which that i could buy a new one.

@@Fireheart90 Wuaa i wasn't expecting a reply even this flash. thank you for the info :') guess i have to pay a visit to a lenovo service center in a nearby city. i hope the warranty covers the repair & part changing cost

It's funny how the older stuff almost never dies. Maybe as time moved on and things became more competitive the parts supply went to the lowest bidder and rated claims became a bit of a stretch.

@@JonnyFix Yes that makes sense, The crap, sorry cap :) is eather under rated for voltage so there is an internal arc that welds the structure, or the layers are so fragile that vibration or temprature changes cracks the internal layers. I almost sound like i know something ha ha :-D

@@zx8401ztv Give yourself more credit ol' chap! Knowledge is still valid, even if not used so much :)

@@JonnyFix i learnt a lesson a long time ago, dont be a big head, there is always someone around the next corner that can make you look thick. So run away from that corner ha ha :-D

A USB power meter. There are many different types under that generic name with different USB type sockets

Element14 but also mouser, digikey, rs components. I'm sure you could find them on ali/ebay if you don't care for quality but I'm sure they're just fine.

First things first I did check the charger. The simple act of passing it through a USB meter at 0:37 shows it was supplying 20V to the laptop. When you have experience you don't need to shove meter leads in the end of charge cables just to prove a point. I went straight to the motherboard and as you see the fault was on the motherboard so spending more time checking the charger would have been a waste.

AAhhhahaha.........haha,......ha......ha...... 😊