Let's Build a Tool Sharpener

Let's Build a Tool Sharpener - Part 4

Рет қаралды 134,958

28 күн бұрын

This episode on Blondihacks, I’m working on a tool sharpener! Exclusive videos, drawings, models & plans available on Patreon!
/ quinndunki
Buy Blondihacks stuff in my store! www.blondihacks.com/store
Have questions? Try my FAQ! blondihacks.com/frequently-an...
Here are links for many of the tools that you see me using:
(I earn small commissions on these links)
• Shrum Solutions face mill: www.shrumsolutions.com/shop?p...
• 6mm CCMT Boring Bar | Shrum Solutions: www.shrumsolutions.com/produc...
• D. Gray kits for the home shop : d-gray-drafting-and-design.my...
• The Original Rose Index : rosenthalproducts.com/
• Mill clamping set : amzn.to/2xc9vqr
• Chamfering Tool : amzn.to/2IJsAUs
• Zero Flute Chamfering Tool : amzn.to/3bmPLPe
• NOGA Deburring set : amzn.to/2Jv3RlW
• NOGA Reversible Deburring Tool : amzn.to/2X07WX1
• Knurling Tool : amzn.to/2FblXb1
• Tapered Reamer : amzn.to/2Gn0b3G
• Chucking Reamer set : amzn.to/3odnVvh
• Nicholson files : amzn.to/2VcHkls
• Nicholson needle files : amzn.to/2BDt7ph
• 1-2-3 Blocks : amzn.to/2EvAsGq
• Dormer center drills : amzn.to/2X7U6ij
• 6” Divider : amzn.to/2GTncM3
• NOGA arm with magnetic base : amzn.to/2U2bGTI
• NOGA arm Big Boy : amzn.to/381acji
• Collet Block set : amzn.to/2UkF1vZ
• DeWalt drill and driver kit : amzn.to/2Gp6IeJ
• DeWalt portable band saw : amzn.to/2U4Mhsw
• DeWalt band saw blades : amzn.to/2H2J4X0
• High Speed Steel parting blade : amzn.to/2YcdYBv
• High Speed Steel blade holder : amzn.to/2JgO0IK
• High Speed Steel tool blanks : amzn.to/2H1qoqr
• Grizzly Pre-ground tool bits : amzn.to/2H4yr5z
• AXA tool holders : amzn.to/2V1gOHl
• Quick Change Toolpost : amzn.to/310mshq
• Norton oil stone kit : amzn.to/2EbLEH3
• Norton small sharpening stone: amzn.to/2PQwex9
• End mills : amzn.to/2U76Vsf
• Milling machine starter pack : amzn.to/2tA2M4e
• Forceps : amzn.to/2Ww5dFT
• Mill Parallels : amzn.to/2lfW82i
• GearWrench ratcheting tap & die set : amzn.to/2lMwZfV
• Step bits : amzn.to/2q54yfJ
• Starrett automatic center punch : amzn.to/2DCI7C9
• Budget transfer punch set : amzn.to/2yfDgHi
• Precision shim stock : amzn.to/34lJlME
• Jet 2-ton press : amzn.to/2SLas1s
• Gear Wrench locking puller : amzn.to/2ubBV1W
• Starrett tap wrenches : amzn.to/35jxM9e
• Goldenrod oiler : amzn.to/2TTS0En
• Acid brushes : amzn.to/36qWCo5
• Cratex (Bright Boy) block : amzn.to/38fNm72
• Scotchbrite deburring wheel : amzn.to/3ks0P2V
• Fein Turbo I shop vac : amzn.to/2vXpech
• Machinist’s scale : amzn.to/2Zk6oVj
• Mixed metric/imperial dial caliper : amzn.to/2KKARYY
• Mitutoyo dial caliper : amzn.to/2IMIxJE
• Mitutoyo micrometer set : amzn.to/2GtICPx
• Mitutoyo depth micrometer : amzn.to/33M8aSH
• Mitutoyo edge finder : amzn.to/2G36omq
• Mitutoyo dial indicator : amzn.to/2H09gBr
• Mitutoyo dial test indicator : amzn.to/2E5lRQw
• Coaxial indicator : amzn.to/3bbBEwE
• Mitutoyo telescoping gauge set : amzn.to/2Z6houn
• Fowler dial bore gauge : amzn.to/2KQJNf2
• Fowler inside micrometer : amzn.to/2TVm7Jo
• Starrett 98-6 Level : amzn.to/38K7lMD
• Grizzly Height Gage : amzn.to/2PDTr7i
• Thread Checker : amzn.to/2CpvAUU
• The Amateur’s Lathe book : amzn.to/3jIYlwe
• Anchor Lube : amzn.to/2H9X6oQ
• Boeshield T-9 : amzn.to/2TCE0wB
• Brownell’s Oxpho Blue : amzn.to/2YhZTmR
• JAX Metal Blackener : amzn.to/2MVe8wj
• Dykem layout fluid : amzn.to/2U7KQts
• Dykem dauber : amzn.to/2uoXtbm
• Tap Magic cutting oil : amzn.to/3j8kNnR
• WD-40 : amzn.to/2GYV8rY
• Super 77 Spray Glue : amzn.to/2YScxZl
• Loctite 603 : amzn.to/2EYsPbi
• Loctite 242 : amzn.to/2RIt3sQ
• Way oil : amzn.to/38Gl9qW
• High pressure grease : amzn.to/2GloHTd
• CMD Extreme Pressure lube : amzn.to/36JPNy9
• Dry graphite lube : amzn.to/2U0YEZH
• 3-in-1 oil : amzn.to/36in43e
• Kroil : amzn.to/2uCf1RL
• Evaporust : amzn.to/36NSkII
• Brasso : amzn.to/3buE6yL
Commenting policy : blondihacks.com/commenting-po...
As an Amazon Associate, I earn from qualifying purchases.

Пікірлер: 147

@Blondihacks 26 күн бұрын

Hey everyone! Lots of concern this week about my tapping setup. Yes, those Starrett tap handles do have a tendency to hold the tap a little crooked sometimes. However I’ve been tapping holes with that setup for ten years and it doesn’t cause any measurable error in the hole or threads. I’ve tapped tens of thousands of holes that way and never seen an issue. It definitely doesn’t cause a hole to move 0.75mm in a part. 😄 That error most likely came from the centre finder. That was the error prone step in the process.

@markmonier-williams2508 26 күн бұрын

Ahh yes, everyone is an expert this week because Joe Pie just posted a video on the vagaries of using tap handles with a spring loaded centre.....

@Hephera 26 күн бұрын

@@markmonier-williams2508 and as usual joe pie is just flat out wrong and being anal about something that doesnt actually matter. and encouraging his braindead fans to go and harass everyone else on youtube for not doing things the way he likes to do them

@tates11 22 күн бұрын

@@markmonier-williams2508he kept that tip a secret for quite a while 430 odd videos more important. Or has he just discovered his tap wrench is out.

@robertpearson8798 27 күн бұрын

Boring heads are like Canadian Tire, there’s lots of things about them that I don’t like but I’d hate to have to do without them.

@imcactus9802 26 күн бұрын

"Hefty chunk" translation: Blondihacks: a handful Joe Pie: where's the tweezers? Cutting Edge: Forklift has no chance, fire up the yard crane.

@Craftlngo 26 күн бұрын

It's like the definition of "Sheet Metal" depending on the sector of industry you're working in. Fine mechanics use sheets of a few mikrons of thickness others would consider a film while a shipyard uses Sheet Metals that other would consider a big effing wall of steel.

@daviddodge8028 27 күн бұрын

I'm making this project with you. Thanks for making those mistakes for me, it saves me the time to do it myself. only problem is you need to be more generous with them as I always have a surplus. Keep up the great work.

@carlwalker7560 26 күн бұрын

How many mistakes come with the kit? Did you have to buy extra? 🙂

@jeremylastname873 26 күн бұрын

@@carlwalker7560 All of them. 😂

@gruzzob 26 күн бұрын

Mistakes are like screws, you are supposed to find them on the table after doing the final assembly of your project.

@gruzzob 26 күн бұрын

4:40 You didn't gouge the surface, you machined in an oil/lubrication groove. Always knew you were a smart one, anticipating upgrades like that.

@steve_weinrich 26 күн бұрын

"Actual fun may vary." Brilliant!! Thanks for the fantastic video.

@jimsvideos7201 27 күн бұрын

Thank you for making Saturday afternoons adventurous. I look forward to seeing this apparatus (device? implement?) in action. 😊

@bbrachman 27 күн бұрын

I used to use a negative rake when my dad asked me to clear the lawn of leaves. Also known as Schroedinger's Rake.

@brandonlewis2599 24 күн бұрын

Also, that cool trick with the half-moon parts being set up with gauge pins is genius. That's the kind of thing I love learning about -- cool setup hacks.

@blakOrkk 26 күн бұрын

The most imporant tools in any workshop; guess-o-meter, feel-o-meter, approximeter, eye-o-meter and a couple more that I can't remember from the top of my head

@ulbuilder 26 күн бұрын

The laser candy made me think of Vans aircraft kits. They started cutting the holes on aluminum sheet using lasers. When builders dimpled the holes for rivets, the laser hardened aluminum cracked!

@richardlincoln8438 26 күн бұрын

Thanks again Quinn for the time and efforts You spend on these videos. Best Wishes to You and Your Family.

@Hawk013 26 күн бұрын

So a cautionary tale about the afore mentioned stacking tolerances and rounding errors. I had a turned part to make that had about 20 or so features, all measured from one to the next. Now the engineers, working to "military specifications", decided it would be best to round all measurements to the appropriate significant digit for the accuracy required. What that means, of course, is all the 3/8" measurements were rounded from .375 to .38, and so on. Not being willing to put up with such stupidity, I had the engineer run off a manufacturing drawing for me with all the featured measured from one end. Needless to say, the QC guys spent quite a long time trying to figure out why my part was a different length that what they calculated off the print, but was still correct. Good times...

@crabmansteve6844 26 күн бұрын

Quinn, get a pack of Cratex sticks, they're a godsend for small stuff like this when you can't get something in there to deburr

@chuckabell7456 27 күн бұрын

It's your fault Blondi! Electrical engineer here and hobbyist woodworker. I do enjoy your videos/projects though. I was temporarily dazzled when online buying some metric brad point bits. And there it was... a pair of 1-2-3 blocks on sale. I now own them - if nothing else will look cool on a shelf. 🤪

@PaulsGarageProjects 27 күн бұрын

That's a cool way of using the pointy end of the Starrett centre finder!

@russherbelin5322 27 күн бұрын

Telling Swarfy it’s an “E ticket ride” really brings back memories.

@craigpuetz7020 26 күн бұрын

Embed a small magnet in Swarfy's posterior and she/he can ride securely or watch from many vantage points. The guard duck that helps me find coding errors sits wherever I place hime.

@wolfitirol8347 27 күн бұрын

I built a Quorn a tool sharpening machine after the plans you get everywhere in book shops etc nearly a decade ago it did a very good job until lately when I gave it to a friend as a present and this time bought a new 😊 Wait til Finn is ready with this to decide if I do it also there is no better present to a friend with a workshop but which can't sharpen his end mills , drills etc 😊

@petem6291 26 күн бұрын

Quinn , you always do nice work ...This project reminds me of a similar type of tool we had in the shop years ago, that the torch would be on the business end of the tool and a tracer pointer would be on the other end, and a little motor would trace the outside and the torch would cut the shape I thought it was the coolest tool. now we have a water jet machine and the pantograph torch just stands guard duty in a corner of the shop....

@mrimmortal1579 27 күн бұрын

Hi, Quinn! Happy Saturday!! The project is coming along nicely, I’ll be excited to see the finished apparatus in action. Your videos always feel like they’re too short!

@TheDistur 26 күн бұрын

Getting real fancy. Cool project.

@avosauto 26 күн бұрын

I was waiting for an episode when you would bring out the wheel cylinder hone. Beautiful work

@firebird8600 26 күн бұрын

Yay!! It's Blondihacks time!!!

@MrCubflyer 26 күн бұрын

I love the cylinder hone idea great job.

@mattomon1045 27 күн бұрын

Cool work Quorn !

@heighRick 26 күн бұрын

Thanks Quinn, helps a lot!

@johnapel2856 26 күн бұрын

Love it! Thanks, and Meow to Sprocket.

@Esti.duPreez 26 күн бұрын

Love your humor and videos!

@bulletproofpepper2 26 күн бұрын

I was just thinking about making a lawnmower blade sharpener guide?!? Thanks for sharing.

@cabe_bedlam 27 күн бұрын

Steel sandwich with a laser candy shell. Mmmmmm delicious indeed!

@ryebis 26 күн бұрын

Ah the 4 bar linkage, takes me back to my draftsman days.

@thedabblingwarlock 23 күн бұрын

I have loved watching you make that mechanism. I have my grandfather's old drafting table and if the mounting kit I found to replace the mounting hardware for the Mayline parallel bar doesn't work, my plan B was to see about making or buying a drafting arm like the one Inheritance Machining uses.

@artyfarty87 26 күн бұрын

Thanks for sharing this cool process Sis, Ducks are the real MVPs LOL

@johnlinquist2998 26 күн бұрын

I saw no mistakes'. just an adaption of the drawings to illustrate an alternative build method

@felixar90 26 күн бұрын

The dimples are great when you have a radial arm drill press.

@garychaiken808 27 күн бұрын

Great job. Thank you 😊

@corypride5096 26 күн бұрын

Thanks. (No conversion req'd!)🤗

@matiastripaldi406 27 күн бұрын

Basic non-machinist question: why did you go to the trouble of drawing a center in the round plate, then drilling it out on the mill, then use the threaded mandrel on the lathe? Couldn't you have chucked the outside of the plate, drilled through the center (on the lathe), and then used the mandrel?

@kwaaaa 27 күн бұрын

My guess is that they are using a 4 jaw chuck, so it's not self-centering. If you have a lathe, it's always a chore to swap chucks and you try to make due with round-about ways of doing things to avoid the extra effort.

@matiastripaldi406 27 күн бұрын

@@kwaaaa yeah that's true, my method would have needed a 3jaw since there was no way to indicate in the outside of the plate while still gripping it.

@evanbarnes9984 27 күн бұрын

I'm not totally sure about this myself, but I do a lot of laser cutting for work. Laser cut edges are not perfectly perpendicular to the faces of the material being cut. Depending on the focus height of the laser, you get a sort of hour glass shape on the edge. This might make it so that it's hard to actually get a good grip on the outer diameter with chuck jaws. Or it might make it settle into a crooked position in the chuck. Laser cutting also hardens the outer shell of the metal, and metal that is hardened is also more difficult to grip. The jaws in a chuck actually slightly dig into softer metal to create grip, but don't do that with hardened steel. That's why you don't put end mills in a drill chuck, and instead use an end mill holder. Personally though, I'd probably have tried just putting the plate in the three jaw chuck on the lathe and drilling it out like you said. Avoids having to indicate anything. Quinn knows so much more about machining than me though. But I do know in previous videos she's done a more complex process for a part and then realized after the fact that there was a simpler way. It happens. Also maybe she just wanted to show this particular technique. This is an educational channel, and a damn good one!

@joshuawills5242 27 күн бұрын

A bit more after Evan's good points about metal hardness and references for clamping: It might have just been faster for Quinn to do this in the mill. She would have had to swap out the 4-jaw chuck for a 3-jaw, then probably flip the jaws to hold the large diameter part. And it's entirely possible the lathe was setup for something specific, possibly that she didn't want to break down - maybe she had already indicated-in the mandrel. So my guess / suggestion in general is that - "no really good reason, it was just easier in the moment".

@mrimmortal1579 27 күн бұрын

@@evanbarnes9984 I think that your guess is the correct one. Quinn mentioned in earlier videos that the laser cut edges leave a slight taper to the edge. A tapered edge is not just difficult to grip in a chuck, but the taper leaves only a single point of contact on each jaw, which reduces the rigidity of the part as well. If the part had been laser cut much closer to the finished diameter, we would have likely seen Quinn make up a superglue arbor that roughly matched the diameter of the part, and then dial in the whole thing on the four jaw chuck to the closest approximation of centered to the outside edge, and then turn down the final diameter and drill/tap the center hole in one setup. But since she had plenty of room to finish the outside diameter, a close approximation of the center hole was close enough, and saved her from a good deal of fiddly metrology.

@johnrussell6620 25 күн бұрын

Maybe it was mentioned before, but, at 5:40 your centerpunch mark seems to have missed the 1-7 o'clock line, maybe this was your loss of concentricity at 8:00? Thanks for making this video, I truly enjoy watching them.

@torstenssongustav 27 күн бұрын

Tack!

@paulputnam2305 26 күн бұрын

I’ve been machining for more than 40 years now and I agree, machining is definitely variably fun! Especially CNC machining because we use variables in every program…ha ha ha P.S. when I make metric parts, I’ve found that 25.4 is my bestest friend.

@raymondhorvatin1050 26 күн бұрын

Thanks for sharing

@brucematthews6417 26 күн бұрын

You mentioned using light pressure on the hoop but during the fitting steps of the hoop onto the first center piece it looked like the hoop was pivoting a little on the "sides" that would have closed inward when the jaw pressure was released. So I'm thinking that even with the light pressure there was a slight oval result. It makes me want to move ahead with my small fixture plate all the more.

@benmcguire603 25 күн бұрын

Great eye, Bruce! I was thinking fixture plate was the only option, too, as any clamping pressure would invariably oval the hoop.

@paulmorrey4298 27 күн бұрын

Thanks Quinn

@bjrn-oskarrnning2740 27 күн бұрын

Machining is fun the same way Dwarf Fortress is Fun™!

@zevakikel 25 күн бұрын

Loved the video intro!

@manythingslefttobuild 26 күн бұрын

Great video Quinn.

@PioneerRifleCompany 26 күн бұрын

I was waiting for your video! Good work. Have you thought about machining the sliding surfaces on the static portion of the tool jig? If you polished the under/outer surfaces and put an oil groove on the plates clamping it you might get a better action, or feel, when you are grinding the tools. Just a thought. :) Keep up the good work!

@geraldguyette470 26 күн бұрын

Like Kirk said to the cops " one small mistake " , your journey continues , I'll keep watching your progress . thumbs up .

@rian6129 26 күн бұрын

For a part with a burr or raised edge like those you could always lightly lap them on a flat stone or sandpaper on a flat surface.

@petergamache5368 26 күн бұрын

Wait ... the "Acute Tool Sharpening System"? For those of us who aren't over-achievers, is there an alternate plan for the Obtuse version?

@masterQ20 21 күн бұрын

Very good, really good!!!

@paulcotesr5623 2 күн бұрын

like to see it in action now lots of work but look great!

@JohnMDiLiberto 24 күн бұрын

1:13 Love the running gag in this series.

@patate1684 27 күн бұрын

Why don't you use the dimple to drill the holes on the drill press with a floating vice? Whouldn't that be much easier than finding the dimple position with the pointy thing and still give you enough precision?

@stevelescom4336 26 күн бұрын

That is one cool tool !!!!

@FrustratedBaboon 24 күн бұрын

Basically like a windshield wiper with one side shorter to give it a swing.

@raymitchell9736 26 күн бұрын

Your fun may vary... Yes I've had times where fun varies as a function of difficulty and rotten Murphy's Law luck... but it never disappoints.

@cypherfunc 26 күн бұрын

That sure is a-cute tool sharpener 😄

@kwalker375 26 күн бұрын

17:40 You can use a depth micrometer and a 123 block to determine that smaller inner diameter size/diameter.

@adagioleopard6415 27 күн бұрын

New drinking game! Every time Quinn uses the Heimer Edge finder, gake a shot!

@ichbrauchmehrkaffee5785 27 күн бұрын

I see you break the edge with the chamfering tool as well as with the file by hand. When do you use which method?

@theprojectproject01 26 күн бұрын

I love Swarfey

@DavidRavenMoon 27 күн бұрын

Did you say I have a small boring head? Gee, thanks. I least I save on the cost of hats. 🤷🏻‍♀️

@mrimmortal1579 27 күн бұрын

Maybe that’s why your head is boring? Spend a few bucks and snazzy that thing up!

@repeatdefender6032 25 күн бұрын

I am so curious what this beast will look like when finishing. I hand-sharpen everything, which is not great for accuracy. I want to know how this complicated little thing does it.

@wesleypipelayer7627 27 күн бұрын

Cool

@robertmatel8136 26 күн бұрын

Some of us are more amateur than others. We all don't have DROs so the dimples are helpful.

@marchess923 24 күн бұрын

Iv seen your show a few times before. Your narration is good: sound quality, concise, get the point across. It's cool to see chicks do guy stuff. You sound intelligent. You're probably Canadian. I've noticed they say "prōject", not prawject. Later.

@sween187 26 күн бұрын

Holding around part square.

@roflchopter11 26 күн бұрын

Do you ever worry about the different countersink screw head angles between metric and US? What angle is on your zero flute tool?

@bananas401k 26 күн бұрын

yeah its a-cute tool sharpening system all right, i gotta make one myself

@jimmyrojas5583 25 күн бұрын

👍

@iamarawn 26 күн бұрын

When I look at 10:04 and 10:37 it looks to me, as a novice, like there's a problem with the chuck. That might be issue. At 10:58 it looks to me like the runout of the part and the chuck are identical, but camera's and high speed can be misleading. I don't have a lathe or real experience with it so I could be very wrong.

@Maltanx 27 күн бұрын

Hi Quinn. Just what is possibly a very dumb question... For this project you keep saying that you don't have the metric tools to measure it properly, but why would that matter? 1 Inch is just 2.54 cm exactly, going from imperial to metric means just to divide or multiply the measurement by a fixed number. Does it really matter that your micrometer measures in thousands while you need micrometers? 1thou = 25.4um, exactly by the same definition of the inch. There is no rounding error, as every single imperial unit is defined exactly by a metric unit. Of course this is a really basic observation which you already know and obviously there is a good answer to it. But I'm not a machinist, and I swear I can't figure it out why that would be a problem.

@kindablue1959 27 күн бұрын

I was thinking the same. There's no reason you can't use an imperial micrometer to measure equivalent metric values.

@SouseMouse 26 күн бұрын

I too have only imperial micrometers, and I do exactly what you suggest. I've memorized a few of the common sizes I encounter. The other thing I often do is switch the DRO between units depending on the job.

@johnmerrill6999 27 күн бұрын

For what it's worth, an inch is *exactly* 2.54 centimeters, by definition. The definition was changed in the 1950's. (When in the 1950's? Depends on where you live.)

@mrimmortal1579 27 күн бұрын

It’s helpful to know that a standard 1950s is equal to 1.0001384 metric 1950s.

@user-ji2ft7ds9d 26 күн бұрын

❤❤❤

@RichardBradley-hr1st 24 күн бұрын

Hi, I’ve really enjoyed your videos. I’m winding down on my life and I’m getting rid of my stock of machinist tools. Back in the day, I worked on a machine shop and the metric system was rumored to to be right around the corner. I acquired a set of Starett metric outside micrometers, which are in excellent condition. I would be interested in donating them to your tool selection. If you are interested, let me know. Thank you for sharing your program. Dick Bradley

@fixinstuff9662 27 күн бұрын

The god of machining, Wayland?

@wagnerfarm5550 26 күн бұрын

At 17:40 you said you didn’t have a measuring tool to measure that step. Try a straight edge across the face and gauge blocks or feeler gauges. See what fits till it lifts the straight edge from the face and allows light between them.

@ADBBuild 24 күн бұрын

She was measuring the diameter, not the depth.

@kaneto88 26 күн бұрын

I guess those dimples are intended for drilling on a drill press.

@bernardbush4199 27 күн бұрын

Why do I find myself waiting to say " yatze" when I part something off? Also I like the blue duck and the red squeeze bulb. Not to mention little buddy sprocket...

@filepz629 26 күн бұрын

❤️‍🔥

@freyja4954 26 күн бұрын

It's not a gouge. it's grease, retaining groove.

@DavidLindes 26 күн бұрын

9:33 - 5x5? As in the "Signal strength and readability report" (wikipedia page title) context? Or is there some other meaning of that that applies more directly here? 😮 Anyway, cool stuff. Looks like Swarfy is having fun in the end, and I figure that's what counts, right? ;)

@gagasmancave8859 25 күн бұрын

Swarfy always point north to home

@warrior4christ777 25 күн бұрын

I gotta say,I'm not used to seeing clean manicured fingers on such competent machinists youtube4s closeup shots. Lol😊

@user-un5nu3il2h 25 күн бұрын

Hi! I don’t understand what this small cube 25:52 is for?

@28Cryptic743 26 күн бұрын

does that make boring heads boring (tedious)?

@dakavanagh 26 күн бұрын

I'm just stuck on "I find boring heads tedious". ROTFL!

@brandonlewis2599 24 күн бұрын

Wondering if "Swiss" files would have been better for cleaning up the burr on that thin shoulder. You know way more about machining than I do, but you're also refreshingly honest about your brain farts, so I'm just wondering which way it is.

@34k5 27 күн бұрын

is it still 'north' in metric? or some other thing

@robotskirts 26 күн бұрын

Ahh the south pointing duck, a wonder of 6BC China.

@sam1812seal 27 күн бұрын

Please promise me that you’ll never use the phrase, “diy nut action” ever again…. 😂

@yowie0889 26 күн бұрын

"Hey Beavis, she said...."

@sam1812seal 26 күн бұрын

@@yowie0889 Finbarr Saunders and his double entendres…

@kwaaaa 27 күн бұрын

Ok great, now i need an engine hone, lol.

@lindonwatson5402 26 күн бұрын

my actual fun varies in the up direction waching you oldgirl

@user-sd5wz4zj7s 24 күн бұрын

@tehbonehead 25 күн бұрын

O yeah. The metric conversion, eh? Jus double it and add thirty, eh?

@SmokinRC2 27 күн бұрын

13:18 It looks so unpracticed😅. You have more control with your index finger at the top.

@kevinreardon2558 26 күн бұрын

"E ticket ride"??? That ages you.

@bocam2593 27 күн бұрын

You keep whining 😉 about imperial to metric conversion. My mill/lathe reads out in metric only (no DRO) and I like to make steam engines from "Elmer's Engines" which are all in imperial FRACTIONS! On top of that my lathe Y axis read out is 6 divisions / mm. Try converting 1" and 7/16" diameter to mm/6 for every dimension. 😝 Love your content anyway!!! Thank you, keep it coming. 😃