Let's Extend the Steerer Tube

Рет қаралды 20,973

2 жыл бұрын

What can you do to extend a steerer tube? Today I’m going to extend the steerer tube by 35 mm.
What you need:
Threadless converter 22.2 mm
Headset expander
4” 1/4" screw
1/4" Hex nut
M10 flange nut
The converter is too long so I ended up cutting 20mm of it.
The expander is an alternative of starnut and it's perfect for this setup.
Make sure to tighten the headset bolt first to preload the headset bearings and then tighten the stem bolts.
The steerer tube is now extended to the desired length.
"Steerer Tube Too Short?" series:
Let's Extend the Steerer Tube • Let's Extend the Steer...
Hope Head Doctor Into Steerer Tube Extender • Hope Head Doctor Into ...
Steerer Tube Too Short? • Steerer Tube Too Short?
Tracks:
Lost Time - Eveningland
Right Here Beside You - Spence
Summer in the Neighborhood - Bad Snacks
#steerertube #tooshort #extender
Danyo Sports Channel Episode 134
KZfaq: / danyosports
Reddit: / danyosports
Facebook: / danyosports
Instagram: / danyosports
Twitter: / danyosports

Пікірлер: 35

@cedricbolina7027 Жыл бұрын

Merci monseur after i watched this i finally have an idea on what todo and what to buy

@stefanobuga Жыл бұрын

Hello, thanks for posting your solutions! I've seen all three videos of yours. Do you find this last method more effective than the one from last year?

@ubayash746 2 жыл бұрын

Nice bro

@toganlompkins8886 Жыл бұрын

How does this hold up to hard riding over time?

@Biggreydog Жыл бұрын

Professional 🤠

@dr_ned_flanders Жыл бұрын

That seems dodgey AF. I need to do this, but not like that. I think that the extender quill should be wider so it fits more snuggly and doesn't wiggle around and then the allen bolt extends through the quil and threads into the star fangled nut. When it is tightened it wil thread into the star fangled nut and force the other end of the quill to push on the inside of the steerer tube. It would be true in the steerer tube and have a good grip from the inside.

@MHFishingTv 11 ай бұрын

I wanna asking . What sizes your head tube fork?

@bryandimaano3333 Жыл бұрын

What is the size of the adapter should i buy

@michaelviglianco6121 2 жыл бұрын

I feel like using a high riser bar wouid be my preferred solution. Though I always enjoy these videos.

@stuvademakaroner9607 2 жыл бұрын

Riser and a 35° stem is definitely the best choice

@daily_dose_of_nothingness 2 жыл бұрын

@@stuvademakaroner9607 I m using that combination 35 degree and riser bar

@smizzy048 2 жыл бұрын

Nice

@DanyoSports 2 жыл бұрын

Thanks!

@r_viana Жыл бұрын

What about cutting the bottom of the adapter and thighten it using a regular star nut in the steerer tube?

@ianmangham4570 Жыл бұрын

You can do that instead of using the quil

@key39075 Жыл бұрын

Star nut isn't going to hold it, it'll instantly be soon non-steering handle bar.

@bassinassasin90 Ай бұрын

That isn’t safe, headset will for sure become loose and possible damage the frame. Not a good product, but I like the idea.

@cheewaiyow7469 2 жыл бұрын

Hi may I know I'm using same this size 22.2 stem extension to threaded to threadless. So the headset and the spacer is what size I should buy?

@DanyoSports 2 жыл бұрын

Hi, you need 1 1/8” spacers.

@jonahwhale9047 2 ай бұрын

@@DanyoSports This is the wrong type of convertor for a threadless ahead set. This is dangerous because you cannot tension the bearings. Those adapters are for headed steering stems only. You need to take this video down.

@jhayabellano5383 Жыл бұрын

Can I use this kind of set up for MTB forks

@bassinassasin90 Ай бұрын

No I would not

@alpacamale2909 Жыл бұрын

I have the opposite problem, it won't go down enough.

@ianmangham4570 Жыл бұрын

Hacksaw

@jonathandougherty3677 2 жыл бұрын

And how do you apply preload onto the bearings? This is extremely unsafe.

@rachmatt5082 2 жыл бұрын

you didn't see the part where he installed the expander plug? or maybe you don't know what it does? This is safe.

@jonathandougherty3677 2 жыл бұрын

@@rachmatt5082 The expander is just “pulling” on the stem adapter and not the steer tube itself. I understand that it is all effectively tied together by the adapter but unlike the adapter that is a wedge and very unlikely to come loose, the expander is just opening outward and not as efficient at staying tight. At that point, because the top cap is only connected to the expander, if it becomes loose then the preload on the headset bearings is gone and becomes a danger.

@rachmatt5082 2 жыл бұрын

@@jonathandougherty3677 Yes the fork and the extender are solid. Basically it’s like using expander plug on non-carbon steerer. A lot of people says that it will work, but I much prefer using a regular star nut instead of expander plug. So the question is, will the expander stay tight in the steerer or will it come loose like you’ve said.

@Free__Speech Жыл бұрын

It's dangerous as. The handle bars could come off with anything goes wrong. While the old design is far safer. Bikes should be kept original for safety not to be messed around

@carloslopez3113 4 ай бұрын

This method is not safe. It only works safe with a thread headset.

@jerzydabrowski4802 Жыл бұрын

Tragedy

@Free__Speech Жыл бұрын

Accident waiting to happen 😕

@thetruebrit85 11 ай бұрын

Are you Mad? 😂

@jonahwhale9047 2 ай бұрын

This is the wrong type of convertor for an ahead. This is dangerous because you cannot tension the bearings. Do not use or copy this. Those adapters are for headed steering stems only.