LET'S REORGANISE the WORKSHOP!!

Рет қаралды 58,758

Күн бұрын

I had a long list of things I want to change about my workshop - and in this video I'm ticking off as many of them as possible! I'm going to be exploring storage solutions, de-cluttering, clamp storage, drawers, hammer and mallet racks, tool storage, battery charging station, table saw in feed and outfeed, and more!
Previous videos in this series:
Dust containment unit: • Should have done this ...
Why I'm Ditching My Mitre Saw: • Goodbye, Mitre Saw!
🔴My channel is supported by Milwaukee🔴
Check out their full range here: uk.milwaukeeto...
Tools used in this video:
M12 Drill uk.milwaukeeto...
M12 Driver uk.milwaukeeto...
M18 Jigsaw uk.milwaukeeto...
#woodworking #workshop #tools
Thanks for watching! Please subscribe, click like if you like, and hit the bell icon for future video notifications
🔨 MY TOOLS 🔨
For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon associate I may earn from qualifying purchases
UK affiliate store: www.amazon.co....
US affiliate store: www.amazon.com...
🤝 HELP SUPPORT THE CHANNEL 🤝
Support with KZfaq channel membership: / @ragnbonebrown
Support with Patreon: / ragnbonebrown
Support with PayPal paypal.me/ragn...
Shop With Amazon using my affiliate link: geni.us/iWD3K
💰 SHOP 💰
Etsy: www.etsy.com/u...
teespring.com/...
🎧 WORKSHOP BANTER PODCAST 🎧
/ workshopbanter
Also available on Spotify, Apple, Google and most other podcast platforms
🔗 LINKS: 🔗
Website: www.ragnbonebr...
Facebook: / ragnbonebrown
Instagram: @ragnbonebrown
Twitter: / ragnbonebrown
Email: ragnbonebrown@gmail.com
Second KZfaq Channel (non woodwork videos): / keefykeef

Пікірлер: 216

@ConwayT91 11 ай бұрын

This episode was so extremely productive! Wow youve got a LOT done!

@benefitthirteen 11 ай бұрын

I can appreciate reaching the point where you're ready to be finished, but what a rush when you start working on your next projects.

@cuebj 11 ай бұрын

I have turned something over 1 metre long... about 1971, at school: a walnut standard lamp for my mother in two parts with a table for her thimbles, knitting needles, etc while she sat in her 'drawing room'. She asked me to make it. Used it till she died in 2012. Such a lathe would be vast machine for a typical UK workshop

@Thesidingsworkshop 10 ай бұрын

Love a good rbb workshop reorganisation, just like the original shed where it all started

@esmarimostert7668 11 ай бұрын

I am so happy to see how far you have come. To think I found this channel from a dog house video, and now years later I still enjoy every video 🎉👏

@RagnBoneBrown 11 ай бұрын

Wow, thank you!

@mattparker8304 11 ай бұрын

I can’t think of a bigger endorsement of a product then Keith Brown buying not one but TWO brand new expensive drawers! Good for you Keith, you deserve it.

@Tensquaremetreworkshop 11 ай бұрын

You regard £120 as expensive? Have you seen the price of kitchen cupboards? I, for one, spend more time in the workshop than the kitchen...

@dannybaker2763 11 ай бұрын

Wow. You seem to have created so much more space. That last shot of the whole workshop is brilliant. There are certainly some good ideas in there for the rest of us, too. Great job, as ever, Keith.

@mike25684 11 ай бұрын

Hello from St Augustine Florida. Great video have followed you for a while. One thing I will say no matter how many cubby's you have for scrap wood you will never have enough.

@adammono1839 11 ай бұрын

So much space for activities! Bunk bed drawers next?

@GoogleAreDumb 11 ай бұрын

Really got a lot done there! Just moved house myself so might have to steal a few ideas when setting the shop back up. I got a couple of those bisley metal units for I think £20 each from a second hand shop over a decade ago and they're stupidly useful.

@ginaroussos 11 ай бұрын

The reorganized workshop looks beautiful!! I love how everything is perfectly spaced out on the walls ☺️☺️

@geoffreycoan 11 ай бұрын

Loads of good storage and reorganisations there Keith, I’m jealous, I’ve only got 18 drawers in my workshop, but they were all hand-made and in fact are the only drawers I have ever made! Be worth a workshop tour when you’ve finished, do cover all the little storage solutions you’ve done in the past like the clamp rack tubes and the new hammer rack

@c.a.g.1977 11 ай бұрын

clever solutions and your shop keeps getting more efficient! Great job, Keith! Looking forward to your quest to find a better/smaller lathe!

@shaun30-3-mg9zs 11 ай бұрын

It's looking good, a lot more user space a nice refit wall storage cabinets and shelving . Your workshop will work a lot better now , Great video 😀👍

@STANWoodwork 11 ай бұрын

So many boxes in one video brilliant. Your shop looks like have more space now nice and tidy. Nice job.

@molydood 11 ай бұрын

Love the use of the family fortunes sound effect 😀

@juneritchie2498 11 ай бұрын

Clever solution using the string and tap to fit the vacuum tubing. Overall, your shop reorganization is inspiring and appears to have been a great success. Congrats on your ability to make space from nothing! :)

@pbarnfield 11 ай бұрын

Yep I liked that one too! I shall try this when I get round to sorting out my dust extraction properly as it's half done!

@cobberpete1 11 ай бұрын

What??? a nice blue!!! LOL I like the string solution for the Dust. I saw a video awhile back which used cut up bike inertube. That works well for me. About seven years ago, a client wanted turned legs for a dining table I was making. So I bought a lathe, sized for the legs. Then they changed there mind 😬. Since then I have upgraded a few times and can now tun up to 1.2m in length. Which I have used to make a pennant (flag) pole for a small boat. Large will do a little but little cannot do large. ( quote from Paul Sellers). I'm lucky I have the space.

@blaugrana-jw3dd 11 ай бұрын

I recently reorganised my shop. I got rid of my scroll saw, band saw, drill press, jointer. I have more space and have more fun building

@muggerjm 11 ай бұрын

Looking great keith

@laurawerner 11 ай бұрын

Looking good! I made the same mistake when buying my first lathe. I got a Nova Galaxy, which is 16x44 inches. I've never turned anything close to 44" long (the max was a tool handle around 22" long), but I have wanted to turn bowls larger than 16" diameter. I scavenged some huge logs from downed trees after our big storms last winter. My advice would be to get something a lot shorter, but with as much "swing" (diameter) as you can fit in the space and are willing to pay for. A good alternative to a big, expensive lathe with a huge swing is a medium one (maybe 14-18") with the option to turn "outboard", by pivoting the headstock to the side or sliding it to the end of the bed. That is a great option for a small shop because when the lathe is in its normal setup it doesn't take up extra space.

@Cooper_42 11 ай бұрын

Excellent episode. I confess I was hoping for 42 drawers.

@pitsnipe5559 11 ай бұрын

Wow, that opened up a lot of space. While green is my favorite color, my “workshop” tends towards machinery grey. It’s a Navy thing. 😊

@RedBairnMedia 11 ай бұрын

Having room for activities is always a massive bonus.

@TheDz1991 11 ай бұрын

Bisley is the best purchase ever!

@craigchristensen6082 11 ай бұрын

One of my favorite shades of blue.

@Restorology 11 ай бұрын

This inspires me to reorganize my shop. Thanks!!

@karenalefounder4083 11 ай бұрын

Looking good. You have so much more room now.

@fredsmith6725 11 ай бұрын

Great video Keith as always, next secret project-extend workshop by 8 metres without the wife finding out 😜😊

@kevinisaac9139 11 ай бұрын

That looks brilliant wish my workshop was tidy as that 👌

@andrewgibbons8159 11 ай бұрын

Looks great Keith. Nice fresh look!

@HyperactiveNeuron 11 ай бұрын

When you were counting the number of boxes you had built I couldn't help but picture the Count from Sesame Street counting and the flashing numbers matched up with the lightning strikes. Just needed some bats LOL

@RagnBoneBrown 11 ай бұрын

🤣I should have overdubbed that!

@nigelray12 11 ай бұрын

Love the videos and enjoyed this one. Have you ever thought about putting solar panels on the roof of your workshop. You could generate power to charge your batteries and for your ceiling lights.

@markfredericks9892 11 ай бұрын

That was a lot of improvements! Nice work. I’m loving all these workshop videos. Thanks from Canada!

@iainrutherford184 11 ай бұрын

What is it about us humans... I laughed, but felt your pain when you were removing the metal wall cabinet and precariously balancing it on your head. I would've done the very same thing and faced at least 5 minutes in front of my good lady, explaining why I didn't ask for help. Your workshop is looking fantastic, and has given me some inspiration to crack on with mine 😊

@ShadowFoam 11 ай бұрын

Love all the workshop changes Keith! The Bisley drawers are a classic! Fancy some Shadow Foam in some of those 44 drawers? :D We do have Green!

@itkills9251 11 ай бұрын

Love this kind of video and it’s cool to see how you reorganize to maximize your shop

@IEnjoyCreatingVideos 10 ай бұрын

Nice updates Keith! Thanks for sharing them with us!💖👍😎JP

@Viken43 11 ай бұрын

Never even thought about having cabinets with sliding doors in the workshop. Once painted it would have not been out of place in my living room.... Great work Keith

@MyPurpleNailpolish 11 ай бұрын

very very nice. this satisfies my inner organization goblin

@miketucker7466 11 ай бұрын

Bisley draws are soo handy, Raaco tray compartments fit in them

@garethsharp4039 11 ай бұрын

Love the Step Brothers reference!

@JustinHughesRoberts 11 ай бұрын

A great , and cheap, way to make custom fit extraction adaptors is to use an old 2 litre pop bottle and 'heat shrink' it around your tools and extractor pipes.

@paulprescott7913 11 ай бұрын

Some very good idea's there. Borrowed the rolls of tape storage from you a while back.

@my2ndoneny 11 ай бұрын

The work flow seems so much better and I can see more floor space now. Good job on designing it. I can tell you put a lot of thoughts on this. 🎉

@Wellspicedchaffinch 11 ай бұрын

So one key takeaway seems to be - use strong containers (e.g. shelves, drawer units, etc) and go floor to ceiling for storage: to free up as much space in the garage as possible.

@Nix_sound 11 ай бұрын

Awesome video. Green is my fave colour.

@adeh503 11 ай бұрын

Looking great Keith, ive just put a retractable air hose in my workshop, makes such a diffrence wish id got it years ago

@markhannan4712 11 ай бұрын

Got some great ideas for my workshop I’m building in my cellar thanks

@jake_a_g 11 ай бұрын

Very satisfying video. Need more wide angle time lapses to appreciate the new layout!

@simonlunt353 11 ай бұрын

Great job Keith I am still not as sure as you about your chop saw but that is your choice but I will say this DRAWS you can’t beat them l have lots of them in my workshop and my work place set them up like you have done or pigeonholes and they are great you do like your green paint 😂 you have a great workshop there can’t wait to see your new planer thickness and your leave well done 👍

@SivertBerge 11 ай бұрын

SO MUCH ROOM FOR ACTIVITIES!

@CasualDIY 11 ай бұрын

Great video mate, really enjoyed it and gave me lots of inspiration 👍

@ianvicedomini2648 11 ай бұрын

You've definitely increased the space a lot Keith, There's no bigger improvement than space especially when it comes down to being about to adapt. Great video mate 👍🏼

@MigleschienHysteria 11 ай бұрын

Another great video Keith!

@Wellspicedchaffinch 11 ай бұрын

I hope you have a green paint sponsor :-) you're keeping them in business single-handed :-) !!

@mags8014 11 ай бұрын

I’m so impressed by your reorganisation skills! We’ll done!

@bluecurlygirl 11 ай бұрын

Great job. I'm so jealous

@DeafMaker 11 ай бұрын

Brilliant video, lots of ideas for me to pinch 😂.

@benjaminreinhardt259 11 ай бұрын

Got an idea for you: Mount a small fan in the enclosure for the air compressor pointed towards the cooling fins. Plug the fan and compressor into the same outlet, control the outlet with a switch. That way the fan will cool the compressor when on, and it will be hard for you to forget to shut the compressor off. I did that in my garage after I tipped the compressor over and broke the cooling fan off of the compressor. My intention was to cool the compressor, but it has worked great as a reminder to shut the compressor off at night.

@bigpete4227 11 ай бұрын

Love a good workshop video. I sit in mine for ages just staring at stuff I’m not happy about.

@stephenhall9592 11 ай бұрын

I wish I had a shop of that size. I enjoy watching this type of stuff

@mrs.noodles 11 ай бұрын

Looks great, Keith! Efficient use of space is so important. Also, congrats on Baby Brown!

@nathanlucas6465 11 ай бұрын

If you fancy a change from organising your workshop, fancy coming and giving me a hand with mine? When I bought it, there was a condition on the purchase that all the "junk" (treasure!) that was in there was included. It was fairly full, and I've added to it, so you can now barely get in! I end up doing most work outside, or in the back of my van if it's raining 😂

@nconk8093 11 ай бұрын

Looking good!

@Mrlaughy99 11 ай бұрын

Hi Keith, I spent a good but of time researching a new thickness planer but didn't end up buying at the time. One that stood out was Holzprofi fr it was mentioned on the UK workshop furom and had all the features I wanted such as spiral head and tables that lift altogether without removing the fence. One to add to your compare list I also hear you can get a discount by phoning them

@henley1100 11 ай бұрын

That was really well worth your time and effort, Keith! It's a huge project that yielded a top outcome. Many thanks for sharing. The green theme rules!! Don

@MCsCreations 11 ай бұрын

It's looking fantastic there already, Keith! Awesome work! 😃 Looking forward to see the rest! Stay safe there with your family! 🖖😊

@RagnBoneBrown 11 ай бұрын

Thanks, you too!

@adamprice7150 11 ай бұрын

Wow looks awesome mate great video

@FearsomeWarrior 11 ай бұрын

I saw the lathe chisel racks and couldn’t find a video on them. Just the old 3x and diagonal 3x holders from the new lathe videos. Simple enough but still curious how you made them. Shop has come a long way. Looking back at you insulating/covering window and painting, floors, garage door wall, ceilings.. a lot.

@RagnBoneBrown 11 ай бұрын

They're just plastic conduit hot glued to plywood 👍

@TroodosPoolGuy 11 ай бұрын

If the lathe's too big, lengthways, just cut the end of the bed off, that's what I did with mine. Just make a metal plate for the cut end and bolt it in place to reduce any movement of the bed. Worked for me!

@sdfg88 11 ай бұрын

Probably need to raise the 15 drawer cabinet to avoid bending down to get to the bottom drawer

@niva8043 11 ай бұрын

The happy face of yours when you got the 2:nd Bisley unit 😀

@RagnBoneBrown 11 ай бұрын

It's nice to treat yourself occasionally!

@niva8043 11 ай бұрын

@@RagnBoneBrown Well deserved.

@paulmaryon9088 11 ай бұрын

Great stuff, I know what I'm doing tomorrow!! Cheers Kieth, see you on the next one

@johnrobinson2198 11 ай бұрын

This was one of my favourite videos of yours. I love a good bit of organisation porn! Does the new workshop layout 'spark joy'? 😂

@captainwaldo 11 ай бұрын

Looking forward to the axe restoration. I always enjoy your creative videos.

@techywill 11 ай бұрын

Someone was getting rid of one of those filing cabinets, so a lot of my stuff is now in a 5' finding cabinet. It was a pain to move, but I am happy to have one. I just need to lubricate the drawers one day.

@fartyscratchy 11 ай бұрын

Busy road outside thought of building up your outside wall....

@andreasmenz1748 11 ай бұрын

What a cool video, I really like the pace and there's a lot of relatable stuff in there!

@andrewknots 11 ай бұрын

There seems to be a reasonable variable speed lathe on offer at Lidl, might not be for large bowls, under £90 (reduced from £120)

@heybails854 11 ай бұрын

BISLEY's are the way forward. I have 4 of them from a Bank I worked at closed. They fit A4 paper perfectly. Mine are in the garage with everything you could imagine stored and labelled.

@erikhemmingsson1188 11 ай бұрын

Shop projects tend to be the best ones, well done.

@larssoderlund4003 11 ай бұрын

Great video! Inspiring!!

@laurentdavid8355 11 ай бұрын

you gotta get a record power lathe and planner thicknesser (with Helix cutters). and the color matches the workshop 😊

@ApolloWoodwork 11 ай бұрын

you should look at a retractable air hose

@ashleyberry1116 5 ай бұрын

Do you remember when you got off with Tracy churcher round the back of science block. In year 11, Keith?

@DaveGDesigns 11 ай бұрын

Looking good fella I commented on Matt’s video about his Bisley drawers they’re my go to impulse buy and I’ve got about eight different sets in total, I have at least four of the ones you’ve got they are the best things for a workshop 👍🏻

@teresabell1014 11 ай бұрын

Very nice !

@stevewhitelock9143 11 ай бұрын

might hijack the hammer rack idea 😁

@andljoy 11 ай бұрын

The bisley draws are fantastic we have some super old ones must be from the 70s in work that are not even used. Tempted to see if i can have them.

@QWERTY7773 11 ай бұрын

Great post

@thepintman6166 11 ай бұрын

Im not jealous at all not in the slightest haha...Class job pal

@johnbell1012 11 ай бұрын

Hell yeah!

@rodpotts2666 11 ай бұрын

Dang man you are putting in work . enjoying the videos.

@andyc972 11 ай бұрын

Nice work Keith, I know you said you got bored with this in the end but it will make such a difference to your daily work flow so well worth it, a lot of often repetitive work though granted ! I love that "More green" was one of your main objectives too ! Weird, I was only last week looking into purchasing a Bisley cabinet for my workshop and then both you and Matt put out videos this week including them - Spooky !

@johnwkomdat 11 ай бұрын

Check out the Fanttik X8 portable tire inflator. It has massively simplified the process of inflating all the various tires there are in my garage. And it comes in green!

@craftsmanwoodturner 11 ай бұрын

Please make sure you have space to the left of the headstock when siting the new lathe. You need space to get a tommy bar in so you can tap out drives and so on from the morse taper, as well as some room to rotate the headstock if you go for a model with that. If you genuinely never turn anything very long, then there is a new direct drive Nova lathe coming soon, the Nova Neptune; or you might consider the Nova Nebula if you want something a bit bigger. The direct drive is smooth, powerful and full of torque; the electronic brake saves loads of time on those stop-and-measure projects, and the controls are easy to set to get the speed you want, with no guessing and fiddling around.

@markmcgrath4853 11 ай бұрын

good work !

@LaDuca21 11 ай бұрын

Thanks!

@RagnBoneBrown 11 ай бұрын

Thank you so much! ♥️

@leesvapereviews 11 ай бұрын

Good evening I'm new to Ur chanell and I'm restarting my old hubby of making cutting boards

@Tensquaremetreworkshop 11 ай бұрын

I am always fascinated by people's workshops. They spend thousands on tools, and then use kitchen castoffs for cabinetry. I have one of those 15 drawer unit, and it is useful- but the drawers are too small. mechanics drawer units have the same metal drawer compactness, but much more storage. Those cubbies are great, so much more practical and compact that the 'french cleat' arrays one sees far too often. Good to unify colours, but always a very personal choice... When finished, you will wonder why you did not do it earlier!