LET THERE BE LIGHT! AVS Lightshield Install

No video

LET THERE BE LIGHT! AVS Lightshield Install

Рет қаралды 35,784

Күн бұрын

installing the AVS lightshield on the 22 AT4X!
2019-2022 GMC 1500 AVS Lightshield
amzn.to/3EOSZLQ
Boost Auto Parts All lights mod link for 2007-2022 Gmc sierra 1500
boostautoparts...
9in antenna
amzn.to/3gIIYb9

Пікірлер: 84

@jmoll6503 Жыл бұрын

Welcome back, brother. When the world needed you most, you returned. Really enjoy your content.

@ronaldsteppe1302 Жыл бұрын

Really adds to the appearance of your truck👍

@adam9936 Жыл бұрын

Thanks man. Really helped clear up confusion on the fuse box placement and strategy. Earned a new sub 😊 I have the cab light version, but yours turned out great. Good luck with the wireless version, haven’t heard great reviews but hoping yours works well and that they fixed the issues.

@jonathenskyles1419 Ай бұрын

I didn't see this mentioned so just a heads up, in case you didn't know: the add-a-fuse fuse taps are directional. If you don't plug it in the "correct" orientation, your added circuit will pull through both fuses in a series. It might not be a problem depending on the circuit, but if you start blowing the fuse designated to the original circuit you definitely need to check the orientation.

@timerider313 10 ай бұрын

I added similar lights on my truck but I used a really long zip tie as a wire fish tape and ran the wire inside the hood where there's a channel so you don't see any wires.

@naomigalarza3512 5 ай бұрын

I used a hanger but worked as good.

@tncatrn Жыл бұрын

Great video. Love the old school Nintendo Castlevania style audio 😂

@thedetailingman3816 Жыл бұрын

Unfortunately your hood is still exposed where it's important but it looks awesome either way. I have a color matched one I'm putting on my 22 RST this weekend. Great content sir!

@jrich8036 Жыл бұрын

Thanks for your video. I know know to Tap and into #28 fuse for my grill light install. All other videos were saying #42 but thats not right on a refreshed Sierra 1500

@danielbonner8309 6 ай бұрын

Ya I'm not an electrician but its weird that we are getting constant power from switched fuses. Only thing I can think of is the headlights are on a timer and even when you turn the truck off at night the headlights stay off for a few seconds.You would think it would relay the shield lights off.

@karlmartin7146 11 ай бұрын

Damn I love the color of your truck. Looks good man.

@DucatiGTS 8 ай бұрын

Looks awesome, looking to get one for my 2020 Silverado. With the discussion about hood vibration, I wonder if you could somehow cut slots so you get airflow through the area where the lights stick to, to release the drag and stop the vibration. Great Vid!

@fio3630 Жыл бұрын

Looks real cool , have one on my f-250 just bought one for my bronco .

@RobustArid379 5 ай бұрын

Best looking truck. I wish I was the owner

@user-xd7yv6gk6y 10 ай бұрын

Hey man I enjoy you’re content. My AVS light shield vibrates the hood goin over 70mph any suggestions? It’s not bad it does make some extra noise.

@jasonp3896 7 ай бұрын

Looks pretty cool. Where do you live? I'm seeing a lot of people complaining about salt corroding electrical components. Seems like nonsense. Northeast boy here. How is this product holding up since your install?

@Mtndude76 Жыл бұрын

Looks Awesome 👌

@bcruz264 Ай бұрын

I really want to get one but I'm concerned it might get stolen.. Is there any room to put screws in the inside? Just to keep it secure..

@roberthenry9319 2 ай бұрын

Awesome truck. It really did look better before the light bar. Looks a bit like an ice cream truck now.

@ronaldsteppe1302 Жыл бұрын

That's really neat,I want one for my F150👍

@WICKEDAUTO1 Жыл бұрын

They have it depending on the year!

@358baseball Жыл бұрын

So I connected mine to the same circuit as you did and I wanted to know if yours is off when driving during the day as well? Lights work great in the morning/night but Wasn’t sure if I did something wrong or??? Thanks for the thorough vid!

@catinapond Жыл бұрын

Looks great 👍

@sethlover6498 3 ай бұрын

pretty wild that sticks directly to the paint... anyone had to remove one of these? paint damage?

@naomigalarza3512 5 ай бұрын

Thank you your video was very helpful and made it easy to install. The only issue i had was my check engine light turned on I have a 2024 GMC Sierra Elevation. I unplugged the negative terminal on the battery when i first installed it. Is there a way to reset the check engine light? Thanks

@WICKEDAUTO1 5 ай бұрын

Completely disconnect the battery. Wait at least 10min before hooking it back up

@naomigalarza3512 5 ай бұрын

Thank you ill try it!@@WICKEDAUTO1

@rinkratnifty Жыл бұрын

Looks great, I have a 2020 2500 AT4, been looking for the lighted one where did you get it ??

@WICKEDAUTO1 Жыл бұрын

i got mine from realtruck but i found it on multiple sites

@user-kb5gh3ov8z 6 ай бұрын

Where did you get the rain guards. I like that look best.

@Zle_blacklightning Ай бұрын

Black wire preferably

@ios6605 5 ай бұрын

Go with the single wireless cab lights ‼️‼️‼️‼️‼️‼️‼️

@TheGlock34man 6 ай бұрын

Awesome video bro I’m thinking about getting one now I got a 2024 at4x is that what year you have?

@WICKEDAUTO1 6 ай бұрын

I have a 22’ but nothing has changed except you can get the aev bumper now

@TheGlock34man 6 ай бұрын

@@WICKEDAUTO1 thanks bro that’s what I got the AEV edition

@WICKEDAUTO1 6 ай бұрын

@@TheGlock34man that should just make fitting bigger tires easier for ya!

@miguelgarcia3714 Жыл бұрын

Hi, it looks very nice, I have a question just because I saw lot of bad reviews on Amazon about it shake at hight speed and it make side mirrors to shake as well, can you give me feed back on that please 🙏

@WICKEDAUTO1 Жыл бұрын

Does nothing to the side mirrors, nor does it shake but it does make the hood shake at highway speeds which is not a big deal at all

@nickieravenelle4385 Жыл бұрын

Do you know what fuse # on a 2022 chevy Colorado is the left marker? Thanks

@filup7419 Жыл бұрын

I just watched your video where you installed the Rough Country steps and noticed a similarity. The way you run/route wires needs much improvement. It's just sloppy work.

@jasonallin298 Жыл бұрын

Looks Great! One question. Now when you turn off your headlights and truck is still running, do the lights stay on it turn off with headlights? Thanks

@WICKEDAUTO1 Жыл бұрын

Honestly don’t know haven’t tried it, always left in auto

@maximkatin9669 9 ай бұрын

hey WICKEDAUTO. I have an issue with the fuse 28: the shield lights are NOT ON when lights switch is set to AUTO (so it's auto on/off depending of the day/night) and it's a sunny day (meaning the low beam is off). Did you notice anything like this?

@WICKEDAUTO1 9 ай бұрын

No I haven’t, mine are on at all times as soon as I power the truck, whether auxiliary or actually started. Not sure why it would be different but not the first to say so either

@lowleveltrim1819 Жыл бұрын

I heard some say the lightshield would vibrate at highway speeds. Have you had that problem?

@WICKEDAUTO1 Жыл бұрын

No none. The hood will vibrate though

@jeffrodriguez5581 Жыл бұрын

I really like your low profile window vent visors, how do they do with wind noise, better or worse than without? They are AVS right

@WICKEDAUTO1 Жыл бұрын

No they are factory stick on in matte black. No wind noise at all

@saltlifechris3623 Жыл бұрын

Would you happen to have the part number or link to the window visors?!

@WICKEDAUTO1 Жыл бұрын

@@saltlifechris3623 Part No. : 19417401

@adrielitodad.214 8 ай бұрын

So it’s been about a year since you installed them just wanted to know how are the lights working for you

@WICKEDAUTO1 8 ай бұрын

Not one issue at all

@austenbecerra1791 Жыл бұрын

Looks bad ass

@travishunter2783 Жыл бұрын

Can you add any white led strips or just the lights that come with the hood deflector ?

@WICKEDAUTO1 Жыл бұрын

You could get any set of leds, as long as the size fits in the slot

@travishunter2783 Жыл бұрын

Can you measure the length for me for the Led. Thanks

@joeymills7573 Жыл бұрын

I just purchased a 2023 sierra and want to install a suspension lift, any suggestions?

@WICKEDAUTO1 Жыл бұрын

Best bang for your buck real lift, RC 4in with vertex coilovers. The vertex I had were absolutely awesome!!

@BluRadoZ71 10 ай бұрын

Dont like the wiring part. Dont like how the wire comes underneath the deflector. Also not a fan of using 3m tape. Will probably damage the paint if or when you need to take it off. Had way too many issues with my Mustangs rear wing. Destroyed my paint.

@user-fb8dq4ob6y Жыл бұрын

DOES IT STAY ON WITH THE DAYTIME RUNNING LIGHTS??

@roberthenry9319 2 ай бұрын

Is your all caps key stuck in the on position?

@Boovvamp Жыл бұрын

I want to buy it but afraid to connect it hehehe

@sideways8films488 Жыл бұрын

Ugh they don’t make it for the 2023 trail boss 😢

@danielbonner8309 6 ай бұрын

Yes they do

@rossmorrison1156 Жыл бұрын

After a year and you decide to remove these, any harm to the paint?

@WICKEDAUTO1 Жыл бұрын

Shouldn't be as it is not touching the paint, the 3m is the only thing touching

@dustindewitt1553 3 ай бұрын

@@WICKEDAUTO1how do you get the 3m off without damaging the paint?

@WICKEDAUTO1 3 ай бұрын

@@dustindewitt1553 heat, could just let it set outside depending on how strong the sun is where you are or a heat gun. After you get off what you can with heat, Goo Gone, WD40 and brake blaster all work well for getting the left over off

@user-yu4bs1qm2c Жыл бұрын

Does your light work with your auto headlights???

@WICKEDAUTO1 Жыл бұрын

It’s always on for me, that’s why I did the fuse tap

@358baseball Жыл бұрын

@@WICKEDAUTO1 I too used a fusetap as well but the lights do not work with auto headlights during the day?

@danogarcia5804 11 ай бұрын

@@358baseball me tooo Hello friend, can I ask you how you connected your AVS trim? I have a trail boss lt and I already connected it to module 3 and 4 and in both of them when I put the truck in drive they turn off

@358baseball 11 ай бұрын

@@danogarcia5804 I connected mine to Circuit 28 initially and then put in in Circuit 40. Currently have it in 28 because the light bar started to dim after just 1 week of having it in Circuit 40. Not sure if the light bar was already bad or if it got drained.

@danogarcia5804 11 ай бұрын

@@358baseball do you have problems in 28?