You can say Thanks with the button below by making a small donation! CHECK OUT MY OTHER CHANNEL!! / waynenterprisesvids
Пікірлер: 79
@pawpatina Жыл бұрын
LINK TO THE PART www.xcessivemanufacturing.com/2jz-ge-throttle-lock.html
@thexmedic97562 жыл бұрын
Hell yeah man just ordered one with the link provided in description, hope this fixes a lag in my acceleration.
@pawpatina2 жыл бұрын
Oh it for sure will.
@sitattle5973 Жыл бұрын
Did you see any results?
@chadgeorge21649 ай бұрын
What was the rhe results?
@MsEry-kg7uy3 жыл бұрын
Happy Birthday!
@pawpatina3 жыл бұрын
Thanks!!!
@islandirie36839 күн бұрын
My 98' Altezza when cruising thru a parking lot then slow down and take off again slowly it jerks. Will this help that problem? Please help thanks.
@fezcarstuff585111 күн бұрын
Wonder if this would bypass the APPS and get rid of this bullshit problem I’m having
@alijahsutton60167 сағат бұрын
Did it ever work?
@rme55312 жыл бұрын
Do I have to take the TB out to install that plastic disk/spacer?
@pawpatina2 жыл бұрын
It makes it a lot easier but it can be done on the engine.
@krists6664 ай бұрын
Hey, nice video. I had a question about which connectors do you leave on the throttle body and which are disconnected?
@pawpatina4 ай бұрын
everything is connected or it will go into limp mode
@krists6664 ай бұрын
@@pawpatina I was thinking about doing this mod and doing some research and some say to leave the white connector and the one closer to springs off to prevent car dying when stomping the pedal so just curious if any issues with your mod? Also possibly in future I might throw in a standalone ecu as I have turbo setup on the car and not sure how that will work with TB mod
@pawpatina4 ай бұрын
@@krists666 not my mod, just showing me installing one. didnt run it long and sold the car years ago. there is no good way to make it work. you are better off going standalone ecu
@chrisreyes97042 жыл бұрын
I installed and now my car only wants to move under very delicate throttle after about 1500 rpm it’s fine. But if it’s at idle and I womp it it’ll fall on its face and die? Any suggestions
@pawpatina2 жыл бұрын
sounds like you did something wrong or you have other issues. could be in limp mode. also i dont work for them, maybe reach out to them?
@brandon33371 Жыл бұрын
The DBW mod does this, I’ve read on forums of a bunch of ppl having this problem throwing the car into limp mode after using the mod for a couple of months
@azadvirsingh4082 Жыл бұрын
Does it mean we don’t need throttle control motor there anymore? And without that how to get car out of limp mode because atm my car in limp mode because throttle control motor not working
@pawpatina Жыл бұрын
no and no... new throttle body will be needed.
@azadvirsingh4082 Жыл бұрын
@@pawpatina can i only replace the throttle control motor? Why whole throttle body need replacement?
@pawpatina Жыл бұрын
@@azadvirsingh4082 you can but no one sells just the motor. Will have to find a used throttle body and swap it whole. no point in breaking it trying to take it all apart.
@Resad-kv4qw7 ай бұрын
I replaced the mouth piece,injector mouth.problem still persists.now reverse gear takes almost 40secs before it picks.i had to push it out of alignment shop cause reverse wont pick.i guess the transmission solenoid is dirty or bad.
@pawpatina7 ай бұрын
You can google the codes. usually when reverse stops working its low on fluid.
@Resad-kv4qw7 ай бұрын
@@pawpatina I've topped the oil..but I noticed the 14 bolt drain is sort of loose and does not get tight
@pawpatina7 ай бұрын
@@Resad-kv4qw you are not supposed to "top it"... there is a specific process for checking and filling an auto transmission. and yes, a loose drain plug will let all the transmission fluid out...
@chadgeorge21649 ай бұрын
Will this work on is200 1G-FE engine?
@pawpatina9 ай бұрын
sure....... lol. wtf.
@Pelllaw263 жыл бұрын
I'm getting the plastic piece too. I cannot get my computer to control my throttle so I'ma control it myself. Tried so hard to get it to work but I can't get it to work. Hopefully this helps me bypass my issue
@pawpatina3 жыл бұрын
Someone may have removed the gears from the opposite side of the throttlebody or they are stripped out...
@pawpatina3 жыл бұрын
and if the computer can't control the throttle it will go into limp mode eventually.
@Pelllaw263 жыл бұрын
@@pawpatina I've had a couple of times that went into limp mode but if I rev it up high it will die and go into limp mode. Gonna try another throttle body and see if it works but idk if I forgot a ground or something
@pawpatina3 жыл бұрын
@@Pelllaw26 ohhh... bummer. make sure your grounds are good. and yea if limp mode you probably haver a failing tb
@Pelllaw263 жыл бұрын
@@pawpatina I'll I got a whole intake so I'm hoping it fixes it. But we will see. If not I'll probably get another harness and ecu combo. I have a feeling my harness and ecu aren't working together. They came out of different vehicle
@DonaldUgalde3 ай бұрын
What's the part number
@pawpatina3 ай бұрын
Google
@mmv1898 Жыл бұрын
Hey man i was scrolling to see if someone's having the same problem as i do . I have 1998 gs300 and 75% of gas pedal is not working i have to floor it to so the wire engage even though it still idels so bad and reving so slow plus smell like a gas tank and some backfire i tryied to replace the hole Thottle body with new throttle body sensor but now when i hit the gas pedal i can gear some motor trying to work but nothing happens , what do you think seems to be the problem ?
@pawpatina Жыл бұрын
Oh wow thats older than I have worked on and sounds like you have more than one problem...
@DatFreshKidd111 ай бұрын
Literally having that same problem. My issue was the throttle body wasn’t opening all the way. I had to replace the entire thing.
@Fluxinfluence Жыл бұрын
"This throttle lock is not intended for use on emission controlled stock ECU's." thats what the site that makes it says
@pawpatina Жыл бұрын
And? They have to say that to appease the EPA... same as everyone. Usually will say "For offroad/track use only"
i intsalled this part, but my car is still in "limp mode" so it's making my auto trans shift hella rough. is anyone else having the same issue? ive also replaced the throttle body entirely, i also checked the ECI-s fuse, and its still good as well. hopefully its not an ECM or harness issue. but now that im typing this its just hit me, that ive have to put a few butt-connectors for my APPS (throttle body lever sensor) and also the throttle motor control. oof , i may have donked up pretty bad D:
@pawpatina2 жыл бұрын
Yea sounds like other problems, and if you swap throttle body without clearing the computer it will still be in limp mode.
@elijahmercado19883 жыл бұрын
where can i get that piece
@pawpatina3 жыл бұрын
literally show the name of the company and say it multiple times in the video... not to mention the link in the video description.... wow...
@Gone_Rogue300 Жыл бұрын
My IS300 use a acceleration hesitation problem. Could this be the reason ?
@pawpatina Жыл бұрын
possibly.
@Gone_Rogue300 Жыл бұрын
@@pawpatina I'm def gonna give thie a shot! I love their car to pieces! Her value keeps going up! Was offered a WRX and other models but I can't sale her! I love her so much!
@pawpatina Жыл бұрын
@@Gone_Rogue300 Yea one of the nicest cars I have ever owned. Def got me hooked on Lexus quality.
@Gone_Rogue300 Жыл бұрын
@@pawpatina I just subbed to ur channel! Looking forward to more contant!
@pawpatina Жыл бұрын
@@Gone_Rogue300 Hey thanks! I appreciate it!
@treakrush-oq1hk Жыл бұрын
My car has been on limp mode for so long,stressing the engine performance. Lexus really fumbled.
@pawpatina Жыл бұрын
No they didnt... YOU did. fix it and stop driving that way.
@nunayobusiness75212 жыл бұрын
yeesh 20$ and another 20 for shipping for just a small piece of plastic.
@pawpatina2 жыл бұрын
print it yourself then... and the shipping isnt $20... it calculates after purchase. unless you live in a foreign country or something and that is to be expected...