Don't Clean throttle body before watching this/Cleaning cable controlled or Electrical Throttle body

Рет қаралды 2,239,744

2 жыл бұрын

Throttle Body and Air-Intake Cleaner: amzn.to/2UcEXAF
In todays video i will show how to clean throttle body weather if its cable controlled or electrical
so Don't Clean throttle body before watching this, there are some things you should know before cleaning that way you don't damage your car and cost you more for repairing
Steps for gunk Cleaning cable controlled or Electrical Throttle body
---So for cleaning cable Controlled Throttle body, after i removed throttle body hose and spray CRC throttle cleaner with plate closed and then open the plate and spray the cleaner again, then wipe it with paper towel
after 5 minutes put the throttle hose back
--So for cleaning Electrical Throttle body, after removing throttle body hose, spray CRC throttle cleaner with plate closed and then put the key on (ON) position, ask someone to hold the gas paddle and spray the cleaner again, then wipe it with paper towel
release the gas paddle
after 5 minutes put the throttle hose back
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon EOS M50 Mirrorless: amzn.to/35BdSsU
DJI Ronin-SC - Camera Stabilizer: amzn.to/3wINHwm
Andoer 3-Wheels Wireless Remote Control Motorized Camera: amzn.to/3vDuf2D
Gopro Max 360: amzn.to/345NNTf
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : ali.hoshyar....
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

Пікірлер: 536

@TilakRajVerma 2 ай бұрын

To the point, no fishy glamour, no waste of time, simple and excellent information 🎉👍

@AliMECH 2 ай бұрын

I appreciate that!

@auntbarbara5576 2 жыл бұрын

You dont waste a minute of anyones time. Every video should be like this.

@AliMECH 2 жыл бұрын

Thanks, i like to give more information is a short time, become when ppl having a problem, they should see the solution immediately

@jenarorosado460 2 жыл бұрын

But also remember, experience makes the difference

@babarbka0005 2 жыл бұрын

😂

@mackmorris138 2 жыл бұрын

This is wrong way too do it

@tonyreyes9969 2 жыл бұрын

@@mackmorris138 how to do it correctly then, please explain, thanks.

@ahmedghaznavi Жыл бұрын

This method is good when throttle body is slightly dirty. But if it’s too dirty better to open it and then clean from inner side too. Secondly never spray directly on throttle body when it’s attached all the dirt goes into intake. Better to apply spray on clean cloth and the clean it. That’s how i clean electric throttle of my cars.

@frozenking9394 2 ай бұрын

Thks I Wuz wonder that

@scottykilmer3920 Ай бұрын

Exactly if you know the engine is crapp it doesnt matter, but if you care about the health of your engine dont do it this way.

@dohc1067 8 ай бұрын

I have a 2010 WV beetle with a 2.5 automatic. I noticed recently more hesitation while shifting. I followed your technique of using in my case a piece of wood to keep the throttle plate open. Its interesting how clean it looked from the outside, but after the seafoam spray it was like black ⚫️ tar coming from it. I felt resistance against the motor (buzzing noice) once I bumped the throttle plate. I was able to lightly brush the plate. After about 10 minutes of cleaning, i started the car up. Quicker starting, quieter idling, and consistently better shifting. Thats just from driving down my street. Thank you sir for your help. Eveything i needed was already home for some time so basically it was free maintenance.

@loreadaauto Жыл бұрын

Thanks for sharing your video on cleaning throttle bodies. As a throttle body manufacturer, we appreciate your thorough steps for both cable-controlled and electronic throttle bodies. It's important to properly clean your throttle body to avoid damage to your car and expensive repairs. We'll be sure to recommend your video to our customers for proper maintenance.👍

@AliMECH Жыл бұрын

Thanks, glad it was helpful and easy for understanding

@tee3294 11 ай бұрын

A friend cleaned my throttle bottle with thinners, my car has been revving and consuming so much fuel itself since then. I’m struggling to get a spare throttle bottle for Chevrolet

@InexplicableBill 7 ай бұрын

@@tee3294 Your friend may have sprayed way too much into the throttle body that it seeped into the electronic control panel on the side of it, causing damage. Very little cleaner is needed.

@martialarts151 8 ай бұрын

Best throttle body cleaning video on YT. Only one I found describing how to safely and properly clean the electronic TB and neat tip with torque wrench.

@jesusavila629 Жыл бұрын

If you came to the comments for the reviews , this a 100 stars review , no time wasted and both ways shown thanks

@seanmcasey8376 Жыл бұрын

Excellent! Great camera work and step-by-step instructions. Thank you!

@AliMECH Жыл бұрын

Thanks for watching

@gregroth4696 Жыл бұрын

@@AliMECH Take the throttle body off to clean! C’mon man.

@thomasbrogan9102 Жыл бұрын

Exactly

@Coldwallbar 2 жыл бұрын

Thank you. Every LS400 Owner needs this lol

@achmada9338 2 жыл бұрын

Made sense, to the point,into target. Thank bro

@AliMECH 2 жыл бұрын

You are welcome, dont like to waste time 🙏🏻🙏🏻

@achmada9338 2 жыл бұрын

@@AliMECH true, keep up bro.

@lancewhite4807 2 жыл бұрын

My dealership charges $89 for this service so watched this video and did it for a few pennies that the clear costs.

@AliMECH 2 жыл бұрын

Awesome, glad that my video saved you money

@wolfsden3812 Жыл бұрын

Mine wanted 159.00

@843idfa Жыл бұрын

Yes it's worth that much if they're going to remove it and clean it properly, not just spray stuff into it.

@jamaalblack9076 Жыл бұрын

Plus there’s more involved than just spraying in the throttle body it’s a 3 part kit that includes something like sea forming

@daviddowns7552 Жыл бұрын

thank you for the good details on this. can you please tell me if ( super tech spray from walmart is ok for this? it says throttle body clean + it was the only type they had? ) thank you very much. )

@Luigi13 Жыл бұрын

Good points! Today I cleaned my electrical throttle body with Gumout cleaner, my ignition is a push start and I don't have the option to leave it open the way you did with the long rod. Yes I did get the engine light, but after cleaning and spraying into the throttle body little at the time while revving the engine afterwards the Kia Niro accelerated like a champ, I almost could not feel it and small hills became easier to climb and I could feel the air going through very well with a roar. I also did have a 16OZ B12 Chemtrol cleaner for the fuel. Now I will be clearing the engine light soon.

@sumanravichandran9107 Жыл бұрын

What codes did you get on the check engine light? I have 2018 Camry and my throttle body is not opening on key accessory position. is there any other way or should I move it by hand?

@Luigi13 Жыл бұрын

@@sumanravichandran9107 The only way to open the throttle is by using a clean piece of wood or a hard plastic material to avoid scratching it . It is like a spring it will open and then spray the chemical a little at a time inbetween each spray when I rev the engine I close it by not touching it it goes back the way it is when you first start. And then rev it a little bit and spray gently again and again each time revving the engine at 2K RPM not to eceed 3K rpm. This was my experience towards the end I sprayed an 1/8 of a can and let it sit with the engine off, for about 45 minutes and took it for a drive. Drove for about 10-12 miles and it run beautifully? I have about 31.5K miles on my Kia Niro.

@edsalvador5939 Жыл бұрын

I like videos like this because I learned more here then at my work shop

@AliMECH Жыл бұрын

Thanks for letting me know, glad it was helpful

@stephenhaval6769 Жыл бұрын

Kaka Ali your chanel is one of the most useful Kurdish Channels on the Web, thank you for all these informative videos you share with us.

@AliMECH Жыл бұрын

Glad to hear that, and appreciate your support brother

@spod2998 Жыл бұрын

Good video. Make sure to clean the Idle Air Control (IAC) valve while you’re in there. Same steps as shown but you’ll need brushes to scrub the housing, valve pintle, and spring.

@BenDieseL313 9 ай бұрын

Very informative. Thank you !🙂

@AliMECH 9 ай бұрын

Glad it was helpful!

@erwinmelgar9575 2 жыл бұрын

I always remove the throttle when cleaning them. Maybe this is short cut but i want it cleaned well on thw other side too and not riak of having the dirt and grime going to the intake manifold.

@843idfa Жыл бұрын

Exactly, those cheap youtube videos try to lure people into clicking liking and subscribing with cheap advice, and don't care what happens to people's cars. I had a ton of grime come out when I removed and cleaned mine.

@GametimeSlime 7 ай бұрын

Than you get check engine lights if you don’t relearn it

@1995dresser Жыл бұрын

Had my throttle body off when I replaced the coolant bypass hose on my 2005 Tacoma and cleaned it I moved the throttle plate by hand very slowly and cleaned it no damage what so ever and that was 2 years ago still running great

@royquesada5295 Жыл бұрын

Most damage comes from cleaning throttle body while still connected electrically.

@1995dresser Жыл бұрын

@@royquesada5295 Yep

@frozenking9394 2 ай бұрын

Thks 😮

@Zeek800 Ай бұрын

You are right. Open the electronically activated throttle plate very slowly and gently. Don’t force anything. Spray the microfibre cloth not inside the throttle body and use one finger to carefully wipe.

@j.f.a5041 Жыл бұрын

Muito bom!🥇

@MrTitaocasio 4 ай бұрын

A well taught video thanks I'm a female and I am going to try it now!

@AliMECH 4 ай бұрын

Thanks for watching

@davidfrank2824 2 жыл бұрын

Also when you are done your car might be a little hard to start and when it does you might see smoke from your exhaust. It goes away pretty quickly depending on how much cleaner that you had used. I can only speak on the ones with the cable. If you have one that is really filthy it is better to remove it to give it a good cleaning. Old toothbrushes really make short work out of cleaning one and you can use a toothbrush even with the throttle body on the engine. Great source of information I must definitely hit the like and subscribe. Look forward to watching another one of your videos.

@brazyuniverse4221 Жыл бұрын

If using a toothbrush and some carbon falls in, is that okay?

@churchofseabass9227 Жыл бұрын

You can in fact, open most electrical throttle body by hand, may want to check with your individual manufactuer but Hondas, Toyotas, Subarus all allow you to open the butterfly valve by hand, just don't over extend it and do a throttle body / idle relearn afterwards.

@lalolalo1233 5 ай бұрын

straight to the point vid. I've 07 crv and noticed when engine is idle and I press the gas pedal there's a second delay before it revs not sure what the issue is, or is it normal. Any ideas?

@dahaze140 Жыл бұрын

Excellent work very well! Car is running smoooooth! 2012 Forester with electric throttle.

@AliMECH Жыл бұрын

Great to hear!

@truenexus1usa Жыл бұрын

Good work. I like this video. It's quick and to the point. Good advice on the proper spray TB cleaner only. I think I can do this myself. My Autozone has the CRC brand cleaner. I will also clean the MAF Sensor with only CRC MAF Sensor spray cleaner.

@AliMECH Жыл бұрын

Glad it was helpful!

@neildean7515 7 ай бұрын

Top video, thank you. Just for clarification, did you turn ignition to first notch or turn on the engine fully?

@AliMECH 7 ай бұрын

The key has to be on ignition position

@thomasbrogan9102 Жыл бұрын

Thanks. Well done, bruh.

@baikalkim5324 2 жыл бұрын

Thank you for your useful tips!

@AliMECH 2 жыл бұрын

You are welcome, thanks for watching

@letsgobrandon8661 2 жыл бұрын

Go to any Chevy parts dealer they sell stuff called top engine cleaner, it’s the best hands down. A couple drops of this on a microfiber rag and your throttle body and butterfly are golden. Also clean the IAC Valve and MAF Sensor while you are at it using Sensor Cleaner.

@1995dresser Жыл бұрын

Seen some KZfaq videos using Sea foam and a toothbrush with Great results the Sea foam won't hurt the coated bushings on the throttle shaft

@charlesakaolisa20 3 ай бұрын

Great video, you went straight to the point. Thanks a lot bro

@AliMECH 3 ай бұрын

Thanks for watching

@oujiaboard3119 Жыл бұрын

"No need to use too much of the cleaner." LOL love this video!

@AliMECH Жыл бұрын

lol if you clean something always use more hahah, thanks

@stephenharvey5289 Жыл бұрын

Thank you for doing electrical throttle body. I was thinking o would have to remove throttle body.

@azzamhaq9556 Жыл бұрын

Hi Ali, I moved the throttle body by hand, I had not seen your video. How do i test it now?

@morningglory102 Жыл бұрын

Now that is a smart way to clean the throttle body. I've seen people doing it other ways and then have to relearn the throttle idle control. This was EXTREMELY informative.

@unnainconnu9098 Жыл бұрын

Depending on the car, it may be easy to relearn it, like turning on the ignition, waiting 60s and turning it off. If it is, that's easier than using something to keep the pedal down and avoiding any contact with the throttle.

@brazyuniverse4221 Жыл бұрын

For a Toyota, the idle relearn procedure is super easy

@codyprice0295 Жыл бұрын

The reason you relearn the body idle air control is because you removed the smut from the throttle body that is causing the plate to have to open more to run. Not because you manipulate the plate.

@toddh6234 6 ай бұрын

@@codyprice0295 There is a position sensor in those electronic versions. Manually moving them throws them out of sync or damages them.

@codyprice0295 6 ай бұрын

@@toddh6234 on what kind of vehicle? That’s a very generic statement

@roadtripper5553 Жыл бұрын

Thank you your advice is good

@mickoespanillo6735 Жыл бұрын

Thank you so much. Direct to the point. :).

@AliMECH Жыл бұрын

Thanks for watching

@zanuarrosyidi4034 2 жыл бұрын

Thank you for sharing this

@AliMECH 2 жыл бұрын

You welcome 🙏🏻

@edlopez5k 2 жыл бұрын

Genius!!!!

@traviesocuevas3571 2 жыл бұрын

2008 Nissan Altima 2.5 do I have to reprogram the throttle after cleaning it or remove the Hose?

@RMalai 2 жыл бұрын

Wow! Fantastic video. Thank you.

@AliMECH 2 жыл бұрын

Appreciate that

@EricJones1969 2 жыл бұрын

A little add up: -if you won't let it to dry, car may be hard to start for the first time because of fumes of cleaner left in the intake -if you have modern throttle position sensor it may need some time for ECU to readjust after cleaning. So it will be good if you replace ECU fuse before start cleaning and put it back after you reassemble all the parts.

@Nytellem 2 жыл бұрын

Never heard anyone mention this other than removing the neg to battery. Does that work as well?

@vakhtangjokhadze2427 2 жыл бұрын

@@Nytellem Might help but then you won't be able to use gas pedal for opening the throttle body right?

@jamesj.litteriojr.433 Жыл бұрын

@@Nytellem Yes it does. I remove ECM1 and ECM2 fuses after I'm done for about 1 minute and then put them back in. I do this every time I modify my intake system...Now I got it just where I want it. So even when you are doing an intake system, throttle body spacer, exhaust, etc. It is always a good idea to reset the computer system this way. Plus it's easier than removing the battery terminal. Hope this helps.

@premiumc2282 Жыл бұрын

@@jamesj.litteriojr.433 where is this located in a Honda Accord 2011? Is it easy to disconnect and reconnect

@jamesj.litteriojr.433 Жыл бұрын

@@premiumc2282 I would look in the owners manual for fuses or fuse box at the back of the book. Once you locate it, then you can see how the layout is setup on your car and pick the ECM or ECU fuse/fuses. My Scion has 2 ECU fuses so I pulled them both after I cleaned the throttle body and waited one minute then put them back in to reset the computer everything was fine. Hope this helps.

@shakali3665 Жыл бұрын

Well done wonderful

@melraine919 Жыл бұрын

Good demo and info thank you… from England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

@AliMECH Жыл бұрын

Thanks for watching

@melraine919 Жыл бұрын

@@AliMECH You’re welcome 👍🏼 🏴󠁧󠁢󠁥󠁮󠁧󠁿

@juliustay2541 2 жыл бұрын

Thanks for great video. How do you reprogram electronic throttle body?

@kato2182 2 жыл бұрын

just let it idle for a few minutes or driving on the freeway from 40 mph raise and drop speed or cycle the key in the ignition a few times each car is different for me i just had to idle it for a few minutes

@ghaithsabah8885 Жыл бұрын

Very nice thank you for the valuable information, greetings to you

@AliMECH Жыл бұрын

Glad it was helpful!

@HT-dp6tw 2 жыл бұрын

Thank you. Can we do the same way with honda odyssey 2008?

@tareq7922 2 жыл бұрын

Great job bro 👏

@AliMECH 2 жыл бұрын

Thanks for watching

@coolceecoolcee3958 11 ай бұрын

Great video brotha! Thanks so much!!!

@AliMECH 11 ай бұрын

No problem 👍

@StillLifeHomocide 2 жыл бұрын

You're so informative and to the point. Subscribed.

@AliMECH 2 жыл бұрын

Thanks and welcome

@bonggenese2438 2 жыл бұрын

Thanks bro!!!

@AliMECH 2 жыл бұрын

Any time

@omayaali4157 2 жыл бұрын

hello do i need idle relearn in this toyota camry which has electric throttle body?

@ben_jammin242 Жыл бұрын

Brilliant video 👏

@AliMECH Жыл бұрын

Thanks for watching

@inamrehman8709 Жыл бұрын

in elctronic throttle body without accelertor cable , if L-N key screw which is hidden in glue type material is messed up with. how can we adjust it to orignal position? do we need to use multimeter to check voltage of sensors at idle and full open throttle? do you know any reference values or can ask any professional who knows the values or procedures? its toyota corolla 2010 model..

@unebonnevie 4 ай бұрын

Excellent throttle body cleaning video!

@AliMECH 4 ай бұрын

Glad you liked it!

@richroc7 11 ай бұрын

Excellent video thank you 🙏

@AliMECH 11 ай бұрын

You are very welcome

@jonathanp7184 2 жыл бұрын

Good video! I did it to my car and the engine light turned on and then after driving the car for a few minutes, it turned off by itself.

@AliMECH 2 жыл бұрын

Thanks, it's OK, maybe you didn't let it dry completely, that's why engine light came on, after driving, it got dry 🙏

@4yp6aH8 11 ай бұрын

Thanks,properly made video!

@AliMECH 11 ай бұрын

Glad you liked it!

@LunaCycleAZ Жыл бұрын

Great video thank you so much 🇺🇸

@AliMECH Жыл бұрын

Glad you enjoyed it

@jesuslopez5494 Жыл бұрын

Hello 👋 how’s it going I’ll appreciated if you could answer me about this question 🙋‍♂️ when I press the gas pedal my throttle does not open. Is a Hyundai Sonata 2016 2.4 thank you 🙏

@rgruenhaus 7 ай бұрын

On my 2011 Ford fusion hybrid, the air filter is a lifetime filter under the fender.

@selman044 8 ай бұрын

I bought Motul P1 Carbu Clean a few days ago. It says, start the car and spray the cleaner through throttle. I cleaned my throttle body past with brake cleaner without starting the car. And now my problem is due to cleaning with brake cleaner I think idle air control valve or valve positioning sensor was damaged or the dirt inside throttle was moved to sensor or stuck in the idle air controler somewhere. I wish this Motul product will solve my problems. Here is my question, should I remove the throttle body completely or this is not so necessary? How can clean IAC valve and my positioning sensor? Thanks.

@gracec1665 5 ай бұрын

Fantastic! Thank you!

@AliMECH 5 ай бұрын

You're very welcome!

@parvezkutub3857 2 жыл бұрын

Thanks sir

@k_h_nobody Жыл бұрын

Great vid, not drawn out, great advice. If you get a chance to try BG throttle body cleaner, LMK how you like it, I definitely prefer it.

@AliMECH Жыл бұрын

Thanks! Will do!

@jt8084 2 жыл бұрын

Nice video. Keep it going.

@AliMECH 2 жыл бұрын

Thanks for watching, I will 🙏🏻

@leomysky Ай бұрын

Thank you for the video

@AliMECH Ай бұрын

No problem

@somethingforeveryone4206 2 жыл бұрын

Straight up dont be putting your fingers in an ETB. Some have ice breaking cycles amd they WILL sever your fingers.

@anuruddhadissanayake4881 2 жыл бұрын

Amazing video!!! Good advice

@AliMECH 2 жыл бұрын

Thanks

@AliMECH 2 жыл бұрын

Thanks

@z512345 2 жыл бұрын

Excellent!!!

@AliMECH 2 жыл бұрын

Many thanks!

@ricardopena2463 2 жыл бұрын

very helpfull thankyou

@AliMECH 2 жыл бұрын

Thanks

@elcabo5712 2 жыл бұрын

Thank you so much

@AliMECH 2 жыл бұрын

You're most welcome

@josecarlosrodriguez9876 11 ай бұрын

Thanks man

@AliMECH 11 ай бұрын

No problem

@munethumultimediaproductio4625 10 ай бұрын

Hi am having a corsa utitlity bakkie it take time to pickup and need pressure on accelerator pedal

@user-xt8xx2qy1g 5 ай бұрын

Great video thank you

@AliMECH 5 ай бұрын

Glad it was helpful!

@epp4791 3 ай бұрын

Yeah dont clean electric throttle bodies like this. What he showed can damage them plus can hurt you doing that that way. Just take the throttle body all the way off and run a throttle position reset when you hook it up. Most cars its easy and also improves responsiveness from the sensor reset.

@Fayis1341 2 жыл бұрын

Really great video brother. I have LEXUS LS 460 but it’s throttle won’t open even I apply acceleration in ignition mode . Can I open the trottle with my hand a clean inside? Wht about battery negative terminal is it must to remove that ??

@Fayis1341 Жыл бұрын

I am seeing my comment after 8 month still no reply 😂

@VivaLaRaza619. Жыл бұрын

What if u clean it with another spray and not the one u used ? Can cause check engine light u said ?

@jamesgoforth1606 Ай бұрын

Is CRC throttle body cleaner any different than regular Gumout or all the other carb cleaners?

@buddyhoover57 2 жыл бұрын

Good video!

@AliMECH 2 жыл бұрын

Thanks for watching

@garrieparsons2265 Жыл бұрын

My 2013 Nissan Sentra 1.8 revs pick up too high with out the acceleration if I give it too much right foot drive it hard . Ok if I drive it gingerly slow . Any advice please I’ve changed transmission fluids and transmission valve body it goes in all gears smooth no noises but can’t accelerate to hard or revs pick up too high . So no rally driving for me right now 😂🤙

@animeangel6863 2 ай бұрын

LOVE IT❤

@pareshprajapati7916 Жыл бұрын

Thank you sir 🇮🇳

@AliMECH Жыл бұрын

no problem

@carlodonnell146 Жыл бұрын

Did you spray it into the electronic throttle body? Because I learned through the Penfoster course I completed, that it is not wise to spray the cleaner directly into the throttle body because it may get into the TPS sensors and may do some damage.

@jamesj.litteriojr.433 Жыл бұрын

Love This Guy!!!!! Always learn something new!!!!!

@AliMECH Жыл бұрын

Thanks James 🙏

@gratefuldale117 Жыл бұрын

The key on/ pedal push method was new to me! I removed mine fully on 2006 Tundra 4.7 and really carefully did open gently, as well as a few on engine cleanups. Seems no harm done, just a clean TB!

@docker588 2 жыл бұрын

my one is non-cable controlled throttle body. did u just show "ABRO Carb & Choke cleaner" not to use in throttle body? just want to know more side effects. thanks.

@daviddowns7552 Жыл бұрын

thank you for good infomation video.🏁👈

@AliMECH Жыл бұрын

Always welcome

@ulecha4 3 ай бұрын

thank you for video

@bernabesalgado9636 Жыл бұрын

So on the electronic throttle body even if the battery is disconnected the plate can't be open by hand?

@humid-rb7rt 2 ай бұрын

I did this same cleaning but moved the butterfly by hand. I didn’t use unusual force and hope I didn’t damage it. The car runs better but mpg still not where it should be. Any thoughts.

@thewitness2147 2 жыл бұрын

Well made video...

@AliMECH 2 жыл бұрын

Thanks for watching

@delroyjohnson36 Жыл бұрын

Thanks Bossy Because U Jus Learned Me SumTing New😍😍😍😍

@AliMECH Жыл бұрын

Glad to hear it

@delroyjohnson36 Жыл бұрын

@@AliMECH Respect ✊

@mohakberry7966 2 жыл бұрын

Superb video 👍

@AliMECH 2 жыл бұрын

Many many thanks

@histatimaniples Жыл бұрын

Great video

@AliMECH Жыл бұрын

Glad you enjoyed it

@hotwheel6663 Жыл бұрын

You have to leave key turned on once pedal is pushed down?

@jaguarblack4332 2 жыл бұрын

I don't have scanner to relearn it. I also replaced my crankshaft sensor. Not it's hard to start my car like it wants to turn on but will not. I have to pump gas pedal a lot then it starts. When in drive I can accelerate. Please help

@appwifi7714 2 жыл бұрын

Very good

@paulm2322 Жыл бұрын

Thank you

@AliMECH Жыл бұрын

🙏

@biggj21 Жыл бұрын

Good sheet my friend❤😮🎉

@AliMECH Жыл бұрын

✌️✌️😅

@Official-bg1dt Жыл бұрын

Useful video 👍👌👌👌

@AliMECH Жыл бұрын

Thanks a lot

@dan_6915 2 жыл бұрын

I was looking for this after ive looked at my throttle body and saw it is difficult to get it out from his position.. I'll not spray inside it tho. I'll just use a cloth soaked in liquid to wipped it off. Thanks, mate

@premiumc2282 Жыл бұрын

How did that go for you any improvements ?