Lian Li Dynamic Evo XL in-depth build guide (step by step standard build)
Рет қаралды 91,579
Күн бұрынPrawn here with an in-depth build guide on the Lian Li Dynamic Evo XL, where I'm walking you through, step by step, on how to setup this case in a "standard" layout.
If you're interested in other variations, then you might want to look at my other videos:
In-depth look at the features of the case • In-depth look at the L...
Best features of the Lian Li Dynamic Evo XL • Best features of the L...
How to build the Lian Li Dynamic Evo XL in reverse mode • How to build the Lian ...
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. Unless otherwise stated, the videos are not sponsored financially.
Please note links listed here include affiliate links which may earn me a commission. Find out more below.*
Amazon US - amzn.to/463OhWL
NewEgg - newegg.io/nc6a20662c
CaseKing - tidd.ly/3FmLL2n
Amazon UK - amzn.to/44H3E6j
Overclockers - tidd.ly/49l2hOd
Amazon FR - amzn.to/3PfP4NA
Amazon IT - amzn.to/3PaDrao
Amazon DE - amzn.to/44K8q2K
Amazon CA - amzn.to/3r4jLNu
Amazon AU - amzn.to/45RXmBQ
USB Splitter
Amazon US - amzn.to/45t8DIe
Amazon UK - amzn.to/3PT1nQ1
Amazon FR - amzn.to/3ZPdthK
Amazon IT - amzn.to/3tzAxop
Amazon DE - amzn.to/3ZPdvGo
Amazon CA - amzn.to/3rKi34h
Radiator screws
Amazon US - amzn.to/3ZQdou6
Amazon UK - amzn.to/3tvWCo8
Amazon FR - amzn.to/3tlrZl2
Amazon IT - amzn.to/3PVgtVh
Amazon DE - amzn.to/3PUmilE
Amazon CA - amzn.to/3ZPKABS
Corsair USB hub
go.corsair.com/5gM1Pj
Specs of this build: (note this includes affiliate links that earn me a commission at no extra cost to you)
Motherboard - Asus ROG STRIX Z790-A GAMING WIFI D4 motherboard ( • Asus ROG STRIX Z790-A ... )
CPU - Intel Core i9-13900K (amzn.to/3RWvGrQ)
Case - Lian Li Dynamic Evo XL - • Lian Li Dynamic Evo XL...
Fans - Lian Li SL-INF 140 • Lian Li SL-INF 140 fan...
And Lian Li SL-INF fans ( • How to connect Lian Li... ) (120mm)
CPU cooler - Lian Li Galahad 2 LCD • Lian Li Galahad 2 LCD ...
RAM - Kingston FURY Beast RGB SE 64GB (amzn.to/3NPEuvD)
NVMEs - Crucial T700 (Two 2TB • How to install and tes... )
Crucial P5 Plus 2 TB( • How to install Crucial... )
Crucial P3 Plus 2TB ( • How to install Crucial... )
PSU - Corsair HX1500i PSU ( • Corsair HX1500i instal... )
GPU - Asus ROG Strix RTX 4090 OC White Edition (amzn.to/3tr1nzc)
RGB - Lian Li Strimer Plus V2 ( • Lian Li Strimer Plus V... )
RGB GPU - 600Watt Strimer ( • Lian Li Strimer V2 Plu... )
Specs of the Lian Li Dynamic Evo XL:
Model O11D EVO XL
Case Type Tower Chassis
Dimensions (D) 522mm x (W) 304mm x (H) 531.9mm
Color Black / White
Material Steel
4.0mm Tempered Glass Aluminum
Motherboard Support E-ATX (Under 280mm)/ATX/Micro-ATX/Mini-ITX
Expansion Slot 8
Storage
Behind MB Tray: 3 x 2.5” SSD
Hard Drive Cage: 4 x 3.5” HDD / 2.5” SSD
GPU Length Clearance 460mm (Max.)
CPU Cooler Height Clearance 167mm (Max.)
PSU ATX (Under 220mm)
Fan Support
Top: 3 x 120mm / 3 x 140mm
Side: 3 x 120mm / 3 x 140mm
Bottom: 3 x 120mm / 3 x 140mm
Rear: Up to 2x 120mm
Radiator Support
Top: 360 / 420 / 240 / 280mm
Side: 360 / 420 / 240 / 280mm
Bottom: 360 / 420 / 240 / 280mm
I/O PORTS
1 x Power Button
1 x Reset Button
4 x USB 3.0
1 x USB Type C
1 x Audio
1 x LED Color Button
1 x LED Mode Button
Dust Filters
1 x Bottom
1 x Top
2 x Side
See the official site:
lian-li.com/product/o11-dynam...
Other videos:
Do stickers and heatsinks matter for NVMe SSDs? • Do stickers and heatsi...
Timestamps
00:00 Hello
01:01 Standard build intro
05:26 Accessories
07:00 Motherboard tray adjustment
09:12 Fan capabillities
09:46 GPU mounting and anti sag bracket
12:32 SSD/HDD mounting
18:52 Motherboard preparation
21:44 Galahad II 360 LCD Setup
24:08 Motherboard USB problems
27:03 Push/Pull setup
29:22 Case fan install
35:16 Case wiring
37:21 PSU wiring
40:48 AIO mounting
52:10 The End
🏆Big thanks to my super awesome KZfaq members:
SirSpawnsALot, Meatykeyboard, Rawrr483, Space Cannons, Riggs79, Mike S, Jay Shank 007, Jason Morgan, Starastin, McFarty, Chief Hao, Kraken Tortoise, Chris Thompson and Gaming Nomad.
@TheProvokedPrawn 9 ай бұрын
See this follow up guide on why more intake fans are necessary kzfaq.info/get/bejne/qbx1i8devNacdo0.html
@dougpeters3907 4 ай бұрын
I just started receiving all these parts; question: if you mount the mobo tray at the highest point in the case is there still room at the top for a push pull radiator??
@Issmacdonald 8 ай бұрын
Thanks so much for this in depth explanation. Did my build this weekend. Your video was critical in building this. Not getting thermal throttling. Case is clean and looks amazing with all the great infinity fans along with this very cool LCD AIO Cooler from Lian Li. Also did it in reverse mode.
@TheProvokedPrawn 8 ай бұрын
Glad to hear I helped! Thanks for watching
@theirene Ай бұрын
Wish I'd gotten the same motherboard as you haha 😂 Struggling to find the right cables into correct slots, even while consulting manuals upon manuals upon google searches... Not to mention rewinding and rewatching your video! It's an extremely helpful resource. Thank you
@TheProvokedPrawn Ай бұрын
Maybe this will help? kzfaq.info/get/bejne/rrpjaax1uLemiGg.html
@theirene Ай бұрын
@@TheProvokedPrawn Thank you~!
@BenjaminBot 9 ай бұрын
I started a build in this case yesterday! In the process now so great timing!
@TheProvokedPrawn 9 ай бұрын
Perfect!
@Al3xDk 9 ай бұрын
few days before i do my new build in the mini, in preparation of that i found your video for sl v2 fans setup earlier and now this one even if it's not for the mini ! You'll definitely be my virtual assistant for that build 😅
@TheProvokedPrawn 9 ай бұрын
I aim to please.
@Siliconpixel 8 ай бұрын
Fabulous video - thanks :) Really nice delivery too. I'm a video producer so know that this makes a big difference. Well done.
@TheProvokedPrawn 8 ай бұрын
Thank you.
@MauricedelTaco 9 ай бұрын
thank you for showing the connection process. its what I have been looking for.
@TheProvokedPrawn 9 ай бұрын
Glad to help. Hope you enjoyed enough to subscribe 🦐
@phxze69 Ай бұрын
Mannnn this video definitely help me with the case wiring it came with and wondered where it went to the motherboard. Well done 👍🏼
@TheProvokedPrawn Ай бұрын
Glad I could help. Hope you enjoyed enough to subscribe 🦐
@joshdelicata 9 ай бұрын
you thanks man i have already built a pc like 3 years ago and im building a new one soon. i have worked and now i can build a god pc if you want to know the specs then i will tell you but i really appreciate this video bc it does help me when im building one again.
@DopoConcepts 2 ай бұрын
Helped me out with all the connector cases after three days of struggling! Thanks!!
@TheProvokedPrawn 2 ай бұрын
Glad to help!
@SpaceyMonkey75 3 ай бұрын
Just bought this case, looking forward to building tomorrow (Easter build). Greatly appreciate the vid, as always.🙏🐰
@TheProvokedPrawn 3 ай бұрын
Have fun!
@evileyeball 9 ай бұрын
I always find it interesting when people mount the GPU anyt way other than just the classic Horizontal way Because I wanted to have the nice big back plate showing where I could make an acrylic cover for it with custom art on it. But I also do see some of the appeal of other ways.
@UHChibi 7 ай бұрын
Thank you for putting this video together!
@TheProvokedPrawn 7 ай бұрын
Glad you enjoyed it! Hope you appreciated enough to subscribe 🦐
@keats369 9 ай бұрын
Great video! Thanks for the detail!
@TheProvokedPrawn 9 ай бұрын
Thanks for watching
@alex458italia 9 ай бұрын
perfect timing, going to do a 011 Evo XL Build in weeks lol
@dozilla77 2 ай бұрын
What a video Prawn. Thank you. This video inspired me to ditch my new build with a Y70 non-touch (within the 30 day return policy) and put it all inside this beautiful EVO XL case. Also ordered the 140mm Infinity fans as well. I do have a H150i Link LCD 360mm I was going to keep and top mount the radiator where I can't see those fans but may end up getting the same AIO from Lian Li. I'll have to see if it's noticeable enough to bother me but I do like the H150i link setup with no wires coming out of it (i don't think it performs as well as the lian li aio though). Anyway, awesome video and thanks again.
@TheProvokedPrawn 2 ай бұрын
Thanks for watching. Hope you enjoy
@LIVEGRIFFMYSTER 2 ай бұрын
Such a good and informative video.
@TheProvokedPrawn 2 ай бұрын
Thank you. If you liked that you might like this too - How to build a gaming PC: kzfaq.info/sun/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z
@carabus0354 9 ай бұрын
I am building my PC with this case right now, thank you for the video, I shall use it as a guide. Maybe with a little better cable management though ;-)
@TheProvokedPrawn 9 ай бұрын
Haha
@musthafaclkr9091 7 ай бұрын
Thank you Brother...❤
@MrPlatinumgun 9 ай бұрын
I feel like Lian Li missed an opportunity with their new XL case to make a 420 aio to properly fill the case. I think the highlight of the case being upright gpu mount and 140mm fans with a 420mm radiator capacity...
@Joe-ts4xj 9 ай бұрын
Absolutely. I quintuple checked there was no 420 galahad before going with the thermaltake th420. Still cool, but i will likely replace the fans with uni infinities to match the rest of the case fans in the future.
@XianHokage 8 ай бұрын
I put a 420mm corsair aio and fit with extra room
@bustyjoe 6 ай бұрын
Agreed. The Galahad II Lcd as a 420mm aio would be SIIIICCCKKK
@rob4eva 7 ай бұрын
This is definitely looking to be my next case but prefer it in black, been a fan of corsair cases for a while current owner of the 500D SE, but the case has no room for cable management, this is a full tower case but seems quite small for a full tower, its closer to a mid tower case.
@tomshepherd6375 9 ай бұрын
Got this case coming tomorrow can not wait to build in it just wish they would make the 140 mm reverse fans..
@Rageousss 9 ай бұрын
Agreed. I have 17 Total Fans in this Case with 14 SL UNI V2 Fans, but I’m gonna swap to Infinity. You could Top 3 Reversed 120mm (Intake) or 6 if you do a Push/Pull Config (Intake) Side 3 140mm (Exhaust) Bottom 3 Reversed 120mm (Intake) Rear 1 or 2 120mm (Exhaust)
@TubButter 9 ай бұрын
Thank you.
@Rageousss 9 ай бұрын
I upgraded to the EVO XL from the EVO and I love it with some exception. 1. PSU Installation: Not being able to put it wherever you want is a HUGE STEP BACKWARDS. 2. SSD/HDD Bays: I don’t use them, but them changing the access point was unnecessary. Being able to Install/Uninstall from the back of the Case was the best method. 3. Cable Management: - Case hits home a lot of ways, but. - The Cable Pathways on the side, particularly the Top one should be Longer (Vertically) and slightly Wider (Horizontal) - PSU being forced to the Middle affects freedom. 4. Vertical GPU Mount does not have the support Bar that you screw into the Motherboard Slot and the GPU bracket included don’t work on Vertical GPU’s. 5. Fans: You should be able to put 4 120’s on Top, Side, & Bottoms. 6. Cable Buckles: Should have included more cable or be allowed to buy separately
@kinneydyt 7 ай бұрын
He shows in another video that 4 120mm fans do fit but for some reason it doesn't show in the manual. I'm currently doing 4 myself, will let you know how it goes if you want?
@Rageousss 7 ай бұрын
@@kinneydyt yeah I read that you can make 4 Fit as long as you use fans that interlock
@shadowjohn2266 7 ай бұрын
thank for your excellent review
@TheProvokedPrawn 7 ай бұрын
you can fit 4 x 120mm on top. I showed it and I did it. And again, you can 2 x 120mm at the rear, but it depends on the motherboard placement. I've shown it all here kzfaq.info/get/bejne/e5Oka9CFks-7j3U.html and here - kzfaq.info/get/bejne/abl7rdWQpp-rhoE.html
@shadowjohn2266 7 ай бұрын
@@TheProvokedPrawn as you can see i fixed my mistake i made i now have to sit through all the other videos i watched and find the one that said i could put 4 fans in the 3 positions it was not you my apologies for my mistake
@TheProvokedPrawn 7 ай бұрын
@@shadowjohn2266 yeah I only showed top because you can't do it anywhere else. Thanks for editing 👍🏼
@shadowjohn2266 7 ай бұрын
@@TheProvokedPrawn no problem i was wrong
@PrevisePlay 8 ай бұрын
Great video, about to do a similar one myself, could you make a video on how to use multi Lian Li controller hubs with L-connect ? :)
@James-r1w 5 күн бұрын
Thanks!
@TheProvokedPrawn 5 күн бұрын
Thanks to the super thanks James. Appreciate it
@antonioathanasiadis3307 7 ай бұрын
Very cool build. The explanation is very good but i have one question. I have 360 GA II inf AIO with controller and i have plug in x6 reverse inf (ch1 and Ch2), x3 AIO fans (ch3), x1 inf back fan (ch4) but for the front rgb stip is no other port for. I know that i could plug it to mobo 5v argb but how to sync all the light's including front rgb from L-software?
@kevinlow8704 5 ай бұрын
Hi, first love your channel. Would like to know if you can plug in the splitter for the PWM and the RGB from the radiator fans to the LCD pump connector, and then the header of the pump to the AIO Pump header on the M/B? Will the board throw a fit if it doesn’t detect the PWM if there are no connection to the CPU fan header? Hope this makes sense.
@PhaIIanxx 2 ай бұрын
Extremely helpful and authentic, thank you a lot! But I dont understand: how do some builders/builds avoid to have some single cables visible while here I can still see many cables going from/to motherboard? This here seems more realistic! So how is it that so many other builds can hide their cables but fans i.e. still work?! So confused
@escapist818 8 ай бұрын
Just finished almost this exact same build and everything basically works, but I have no control over any of the RGB in the case (except for the AIO pumphead) or fan speeds.
@aidenlo9326 9 ай бұрын
Hey mate, amazing build guide, looking into doing something similar within the next couple weeks. Just had a quick question about the case fans with push/ pull, I noticed that you have 4 sets of 3 fans (Bottom, Top & 2 for Radiator) + 1 extra fan for exhaust. Do those 5 sets of fans all connect to the Uni Hub Fan Controller for L Connect or would you have to run the exhaust fans through the motherboard. Thanks
@TheProvokedPrawn 9 ай бұрын
I used two controllers. However, you could theoretically connect three + 1 with the daisy chain cable. If that makes sense, in one group.
@aidenlo9326 9 ай бұрын
@@TheProvokedPrawn I was thinking of running 2 exhaust fans for the o11 evo xl which would exceed the 4 fan limit oer group. Just curious but what would it look like if 2 controllers were connected in L connect. Would all the 5 groups of fans show up together? Thank you so much
@andrewtimothy9792 3 ай бұрын
really considering swapping my O11 evo to this, since with this i can have bottom fans and still have space to put an anti-sag for my gpu
@RealStuntPanda 8 ай бұрын
I'm buying this case in a few days and saw the upright GPU config in a pre-release video but when I read the online case docs I didn't see anything about that option. Does it come with the case or do I have to buy it?
@MsabResearch 9 ай бұрын
Top build!! Thanks for the tutorial, will save it for whenever I attempt my own build in the next few months. Question, is it worth it to add a dedicated SSD 250GB just for the OS? And then another 2TB one Gen 4 to run the games and programs? thank you!
@TheProvokedPrawn 9 ай бұрын
I have a drive specifically for Windows and games but tbh 250gb is too small nowadays imo. So easy to fill up
@MsabResearch 9 ай бұрын
@@TheProvokedPrawn Definitely, I just thought the 250 gigs would be exclusively for the OS, then the rest of files and games in a separate 2TB
@justinflores421 9 ай бұрын
Great video Prawn, Is it possible to vertically mount a 4090 with the motherboard being on the bottom position?
@TheProvokedPrawn 9 ай бұрын
I haven't tried but I believe it would be
@meyatetana2973 5 ай бұрын
I have a question having the cold and hot pipes of the AIO touching doesn't that warm up the cold side? or does that not happen with pcs
@lethalno1 7 ай бұрын
Hi will this work the same with 10 fans. 4 groups sets of fans and use the phantek usb extension?
@zulian420 8 ай бұрын
I have this case and I'm looking for a fix for the dual USB 3.0. Does that USB 3.0 splitter work? Reviews on Amazon are a bit iffy.
@astroeclipse5392 4 ай бұрын
Awesome build mate! Thank you for the extensive guide. I actually have the same case but instead I would like to put in 10 LCD fans and 3 infinity ones. 3 LCD reverse at bottom case, 3 non LCD on top (with liquid cooler), 3 LCD on side case, 1 LCD on rear case and 3 on the bottom section of the water cooler. May I ask if this will work? I believe I need two controllers because only 7 LCD per controller correct?
@TheProvokedPrawn 4 ай бұрын
Correct. You'd need two controllers and PCIe power for both which might be a possible problem kzfaq.info/get/bejne/op1dacdk3J7DmZc.html
@leedex 2 ай бұрын
Would the placement of the Liquid Cooler, not be the best solution horizontal in the top? And 3x120 fans exhaust in the side. There will be less “stress” on the pump circulation?
@ridesafealways4929 5 ай бұрын
Can you put a 420mm rad at top and still fit that 2x120mm at the rear by moving the board one step down?
@GanJosie 2 ай бұрын
Dou you think we can mount rog strix 4090 on the side? Kinda doubt it because galax 4070 ti already cram the side, and strix a bit bigger and longer. 🤔
@Stig085 9 ай бұрын
Very good video! Do you believe you can get 2x120mm rear fan exhaust/intake WITH a 420mm aio? Will if fit?
@Forthepeople21 9 ай бұрын
Yupp I have mine like that
@MrL_5322 7 ай бұрын
is it possible to use a vertical mount ? there is no screw on the pcie slots.
@MerquryGaming 8 ай бұрын
What did you end up plugging into that Corsair 2.0 USB HUB? I'm building a relatively similar build soon and I can't figure out if I need one or not, I know you connected the LCD Galahad, but besides that?
@TheProvokedPrawn 8 ай бұрын
The Galahad is actually connected to the motherboard. But there were the two controllers for the fans and the controller for the Strimers
@Bart9Hare 3 ай бұрын
Buying this case second hand, what are the things to watch out for apart from obvious damage. Like what would be good to ask?
@KoRZoR-TV 3 ай бұрын
so if u use usb connection for the controller you dont need to connect the small and thin cable to motherboard headers? , im building a pc and i hate that cable
@yperxronismenosepeksergast7077 Ай бұрын
On the gpu upright position (pcie on the right) any problems from the heat? is going straight to the glass
@HisGamingOfficial 4 ай бұрын
9:37 Can I also have 4 on the bottom? Under the GPU? What about on the back right side next to the motherboard?
@Eusebiugh 2 ай бұрын
Hi. I have this case with lian li vertical gpu, i mounted the kit and the little metal thing i didnt put anywhere.. should i put it ? i can t find any tutorial on yt for this specific case.. only for o11 evo non xl.
@user-cj5jf6my6k 9 ай бұрын
hello im using Lian Li Dynamic Evo o11 i think... and i already attached my ssd on the back panel but i can't find the sata and power cable to attach on my ssd :
@FantasticHD7 6 ай бұрын
Hey. I plugged in my aio inf fans power cable into the cpu fan header on the motherboard. I then plugged my other inf fans in the chassi to my hub controller and plugged that into a chassi fan header on the motherboard. When I look in bios there is only 1 fan recognition at that is “cpu fan”. All my fans are running at the same speed as the cpu fans even tho I plugged the hub into a chassi fan, they don’t come up under “chassi fan 1” in bios. What do I need to do? I want the motherboard to change the rpm of the aio fans depending on the cpu temps but I want the chassi fans to not change rpm depending on the cpu temp.
@brehidk 12 күн бұрын
how many of those adapters does the cooler come with?
@albertjancandido2586 14 күн бұрын
Thank you very much for this. I want to upgrade my PC, and currently I have a z490 motherboard with an i7-11700kF CPU and Rog Strix RTX 3080 GPU. I want to upgrade with all the PC parts you have used, Do you think it will still be compatible with my RTX 3080 GPU? I am not really a PC builder but I am learning heaps from you videos. Thank you!
@TheProvokedPrawn 14 күн бұрын
Yes. That's a good GPU and it'll be fine.
@whitestar1199 9 ай бұрын
I feel lian li have missed an opportunity here with the lcd Galahad by not including the lcd option with the performance Galahad. I’m going to be doing a similar build but with a 7950x3d and all black with the performance Galahad in a push pull config.
@Rageousss 7 ай бұрын
Lian Li is releasing Reverse 140mm Infinity Fans in January
@DannyDarth 8 ай бұрын
Does this case come with the modular usb hub?
@DesmondLQW 4 ай бұрын
Do i need a NZXT usb hub, or any USB hub if i have a Hyte Y70 Touch, ROG STRIX B650-A GAMING WIFI, Galahad 2 LCD SL-INF, 3 reverse SL-INF, 1 normal SL-INF, LL Strimer V2 for 24 pin and two 8 pin? One technician told me to plug all fans to the AIO controller which eats one USB 2.0, the case will eat another USB 2.0, and the Strimer can just connect to the mobo. Will the strimer perform as normal if connected to mobo directly instead of controller?
@wolf1980reed 9 ай бұрын
Can you fit 4x 120 at the bottom too? Were you not able to use one of the 2 supplied side tray covers at the bottom or the rad to fill the gap? so much help these builds, much appreciated
@TheProvokedPrawn 9 ай бұрын
Sadly no, you can't fit 4 at the bottom, which doesn't make sense, but i did try :( As for the covers, I didn't try that idea. Sorry!
@wolf1980reed 9 ай бұрын
@@TheProvokedPrawn lol yeah you right that doesn't make sense if 4 can fit at the top, looks like we need to wait for the 140 SL INF reverse ones, really hope they will make them, on another question if you can help, I'm looking to do the 360 AIO on the side with push pull but feel it is a waste of money to also get SL120 INF reverse for the side-rear(behind the rad) of case as it wont be seen, what other Lian Li non RGB fans could i pair up(more or less same (rpm/cfm/mm-h20) with the SL120 INF reverse on the inside of case on the rad, and could these fans still connect to the same hub for RPM control? many thanks
@segamannLP 3 ай бұрын
I bought the 140mm ones and the Controller but my 140mm fan cabel are diffrent than urs i cant plug in the cable for rgb
@malanderson491 7 ай бұрын
Hi PP, Great video btw, I have just finished the same build, might have used you great ideas and it looks fantastic.. I have looked at the Lian Li website for RGB lighting on the case and it worked perfectly except when I try and sync it with my system setting. I can't get to stay synced, every time I start PC it will not sync with Lian Li or MB software. (its says to push 'M' button to the 8th cycle and hold for 3 seconds) It does sync but reverts after restart. I would appreciate if you could tell me what I am doing wrong. 🐡
@TheProvokedPrawn 7 ай бұрын
kzfaq.info/get/bejne/rtN8fLhllbuzhn0.html
@LuckySweetsC 6 ай бұрын
Shouldn't an aio be an intake so your not pushing hot air from inside through your radiator?
@ZomgZomg007 13 күн бұрын
i find connecting ssd's to the panel impossible on any lian li case when its flushed up on the side panel like that, most cables don't come in the angle needed, especially the sata power cable
@TheRivermat31 5 ай бұрын
hello there i would like a link please for ani saide braket you shaw to block on right side the graphique GPU please thanks
@fernandohirata8161 8 ай бұрын
Can you put the USB ports at the top of the case?
@nikknukem7125 5 ай бұрын
Is the pre-applied thermal paste enough for 13 - 14 gen Intel? Cause they are not square like anymore and they are larger CPUs. Is there enough paste so that when you screw the pump to the Motherboard it expands to cover the whole cpu?
@TheProvokedPrawn 5 ай бұрын
Yes
@brycet191 Ай бұрын
Is it possible to use the HUB that comes with the 3 pack of fans to connect the AIO & Fans or do we need to use the hub that came with the AIO
@TheProvokedPrawn Ай бұрын
Sure. If you have enough cables
@DrSoda. Ай бұрын
Exactly the type of video I was looking for, thank you. God bless. Jesus loves you!
@TheProvokedPrawn Ай бұрын
Glad it was helpful! Hope you enjoyed enough to subscribe 🦐
@_Feanor_. 3 ай бұрын
One thing I wonder. The cables for pass through mode that connect to the motherboard. Are they truly optional? Meaning you can not even connect them in the first place (instead of connecting the cable but not using pass through mode). Wouldn't the pc maybe complain that no cpu/aio fan is connected if you chose to run everything through the lian li boxes and leave those cables off entirely? Because how would the Motherboard know you actually have a cpu fan or aio connected but you're running it through a separate device? Or does the motherboard not even care if nothing is plugged into those plugs?
@CrazyCranker 8 ай бұрын
Will a 480 rad fit on top?
@rivenlikemakar 3 ай бұрын
Are the only Intakes the bottom fans? Isnt that too much negative pressure? Im about to do my build and wondering how your temps are with this current setup. Should I make the rear and bottom intakes and the side and top exhausts with the AIO being on the side?
@TheProvokedPrawn 3 ай бұрын
Yes you'd be better with bottom and side as intake
@rivenlikemakar 3 ай бұрын
@@TheProvokedPrawn Okay thanks man! I got my LCD fans today that i was going to put on the AIO as exhaust, and was poking around and saw this video saying you changed it, so I'm going to return them and get the Reverse LCD fans that way I can use the screens haha. Would you say its okay to use only 3 reversed fans on the inside of the case and then 3 non reversed 120's on the backside of the AIO? They'd all be set to intake but the LEDS would be visible from the outside of the case.
@Uncagedpaul86 20 күн бұрын
I plan on using the TL fans on the AIO instead of the fans that come with it. Its already daisy chained to the other 7 I have in my system. Can I just plug in the USB-C and the pump AIO header into the motherboard? Or do I need to use the fans that come with it and the controller? All my PC fans are TL fans btw
@TheProvokedPrawn 20 күн бұрын
I personally would recommend connecting the ones on the rad to their own port on the controller and then setting those ones particularly to respond to the CPU temp in L Connect. Otherwise yes, that's fine.
@danijelb.3384 6 ай бұрын
Quick question, can I hook up the AIO to the connectors from the Uni fans or do I need to use the older connector included in the package of the Galahad 2?
@TheProvokedPrawn 6 ай бұрын
You can connect the fans to the triple pack controller and then use l connect to control fan speed according to CPU temp as well as connecting the pump to CPU fan
@danijelb.3384 6 ай бұрын
Great, thank you@@TheProvokedPrawn
@shonuff7943 7 ай бұрын
With the aio on the side are you using it for exhaust instead of intake?
@TheProvokedPrawn 7 ай бұрын
It's one option but flipping the fans or using reverse blade is preferable kzfaq.info/get/bejne/qbx1i8devNacdo0.html
@fallenlegion1828 9 ай бұрын
Timestamps!!!!!! Thank you prawn 🙏🦐
@TheProvokedPrawn 9 ай бұрын
Haha, it is something I keep meaning to do, but it takes ages! :)
@fallenlegion1828 9 ай бұрын
@@TheProvokedPrawn I'm sure it's a pain. But it's much appreciated!
@s1nb4d59 6 ай бұрын
What was the best setup for airflow mr prawn?im looking for a case that can cool my mid build ASUS ROG Strix X670E E Gaming WiFi with 7900X3D with V-Cache,stil not sure about what ram im going to get as it gets expensive the lower the CL,any tips or links appreciated,Lian Li O11 Dynamic Evo XL and the ASUS TUF Gaming GT502 builds ive seen have caught my eye so far.
@TheProvokedPrawn 6 ай бұрын
Swapping the rad fans over to be intake kzfaq.info/get/bejne/qbx1i8devNacdo0.html
@s1nb4d59 6 ай бұрын
@@TheProvokedPrawn Hey cheers for the link,its important i get this build right and that she dosnt have over heating issues like my current setup,ive seen that towers are easier to keep cool.
@losturbinos457 9 ай бұрын
I ordered this same white case today. The new gpu brackets are out of stock so need to get them later. This Lian Li Dynamic PC-011 PCMR is way too small for 4080, even with cooler master V3 Vertical bracket the GPU's fans are way too close to side glass. I want to change my corsair fans to Lian Li because the wireless daisychain. And switch to bigger 140mm fans too, but i have to wait for those 140mm Reverse fans...there is only 120mm available at the moment.😑 Only problem is that my CPU cooler (nzxt kraken z73) uses normal 120mm non-led fans, and if i change them to Lian Li's Infinity fans...can i daisychain just the RGB with other Lian li fans in the case and leave the fans rpm control to nzxt app?? It would look bad if rgb is not in sync.😬 Thanks for any tips or advice. Your channel is gold! 🤩
@TheProvokedPrawn 9 ай бұрын
kzfaq.info/get/bejne/rJubd7mL0su0iYU.html
@losturbinos457 9 ай бұрын
@@TheProvokedPrawn Awesome, thank you!!
@applebro9943 6 ай бұрын
35:54 I Bought the same splitter but somehow my front panel not working… I cabled everything correctly, every usb device I connect it’s said unknown devices windows can’t do shit bla bla bla so idk. If I only connect one of the white cable directly to the mobo it’s working but with splitter it’s not
@Gi0Oo 4 ай бұрын
15:57 they might be smaller than average but they still do their job 🥲
@_rmaury 8 ай бұрын
I’ll receive this beast in a week ! Just a Little question, does the AIO have to be in the side or can I mount it on the top ? Is there a real différence or reason to put it on the side ? Thanks !
@_rmaury 8 ай бұрын
I’ve missed your other link who talk about intake fans, I think i’ll find my response here :)
@TheProvokedPrawn 8 ай бұрын
You can mount it on top for sure. kzfaq.info/get/bejne/e5Oka9CFks-7j3U.html
@_rmaury 8 ай бұрын
@@TheProvokedPrawnthank you !
@djvariable 8 ай бұрын
Do you worry about fans blowing on your styx from below when the stryx fans are not on?
@TheProvokedPrawn 8 ай бұрын
no
@k4i_t0_ 7 ай бұрын
I have a question. I bought the AIO, and the 2 of the 3 pack fan and one of the single fan one. Will I use both the AIO hub and one of the hubs that comes with the 3 fan pack one as they are both different.
@TheProvokedPrawn 7 ай бұрын
Yeah that's probably the most logical.
@k4i_t0_ 7 ай бұрын
@TheProvokedPrawn Ah, okay, thanks. And one more question can I connect the triple pack hub small wire to the Aio hub? If not, if I use two hubs, can they still sync? And thanks for answering my questions.
@Tick-ys2sk 6 ай бұрын
So I purchased the NZXT splitter because my strimmer cables were not showing up in L-connect and couldn't change the RGB. I thought this may be a fix but it wasn't has anyone got any idea on why its not showing up. I have a msi mag B550 tomahawk motherboard please help.
@TheProvokedPrawn 6 ай бұрын
Have you tried the firmware updates? lian-li.com/l-connect3/l3_update_manually/
@katcrash1364 7 ай бұрын
Good evening, please tell me if I do not use a usb splitter, not all outputs on the lian li case will work for me?
@TheProvokedPrawn 7 ай бұрын
Depends on your motherboard
@katcrash1364 7 ай бұрын
@@TheProvokedPrawn i have ASUS ROG STRIX Z790-A GAMING WIFI
@TheProvokedPrawn 7 ай бұрын
@@katcrash1364 I've not found a splitter that works properly sadly. So you probably won't be able to use all four ports
@katcrash1364 7 ай бұрын
@@TheProvokedPrawn oh thank you
@skypallman6169 7 ай бұрын
Why wouldn't you set the AIO fans up reverse where it's sucking in cool air from outside and then pulling it through and exhausting it out the top? Never understood why people, including when doing top mounts would want to suck the air inside the case which is going to be hotter than the air outside of the case through their rad? Almost like if a car was sitting idle and you had your radiator fans sucking air from inside the engine bay and exhausting it through the front of the car. Also is it just me or do they need to reverse the cooling tubes? That way they wouldn't be crossed and would run parallel? I love your videos though man. You do great work and share tons of knowledge. Thanks
@TheProvokedPrawn 7 ай бұрын
I do usually. I wanted to test performance kzfaq.info/get/bejne/qbx1i8devNacdo0.html
@dampo2754 Ай бұрын
So if 4x120 fit in top shouldnt it fit in buttom? side? :D gonna buy this case in 2 weeks
@TheProvokedPrawn Ай бұрын
Nope
@swappy2488 9 ай бұрын
hey provoked prawn, i recently bought lian li sl inf fans, and i am having trouble with L connect 3 , somehow i am unable to turn on MB Lighting sync. L connect 3 just freezes when i try to turn it on can you suggest any workarounds ? Thank you
@TheProvokedPrawn 9 ай бұрын
Have you got the 5v RGB cable connected? Also try this kzfaq.info/get/bejne/rtN8fLhllbuzhn0.html
@swappy2488 9 ай бұрын
@@TheProvokedPrawn hi thanks for the reply, i had already referred to this video of yours . i have no problems with function of fans . they work fine only problem seems to turn the MB lighting sync on . i thought i could use armory crate to control everything but alas i havent found any solution and getting in touch with lian li customer service is difficult than going through airport customs.
@TheProvokedPrawn 9 ай бұрын
@@swappy2488 if you haven't tried it I'd suggest a firmware update for the controller and uninstall and reinstall l connect.
@swappy2488 9 ай бұрын
@@TheProvokedPrawn the controllers are up to date and just reinstalled the L connect, doesnt seem to do the trick
@endyisgood 6 ай бұрын
how can i change the rgb on the lian li case? like the rgb strip on the side?
@TheProvokedPrawn 6 ай бұрын
There is a button or you can use your motherboard sync software, assuming you plugged the right cables in
@endyisgood 6 ай бұрын
thanks@@TheProvokedPrawn
@dalebassett6119 8 ай бұрын
Using the same case is there any reason the rgb at the front of the case next to the front glass might not be working when it’s powered on ?
@TheProvokedPrawn 8 ай бұрын
Because you didn't plug the power cable in for it? There's a sata power cable coming from the front that needs to be connected to your psu
@dalebassett6119 8 ай бұрын
@@TheProvokedPrawn it’s plugged in that’s what I can’t understand why it’s not lighting up
@dalebassett6119 8 ай бұрын
@@TheProvokedPrawn I’m just going to assume it’s faulty and live with it because I don’t want to return the case with the build I’ve just done in it
@Addict2FX 7 ай бұрын
After my build, one fan on the AIO is spining and the fan rgbs are working, but not the side RGB, how come?
@TheProvokedPrawn 7 ай бұрын
You connected everything correctly? Checked l connect for firmware updates? One fan spinning is odd, very odd. It suggests the fans aren't connected properly but you say the RGB is
@Addict2FX 7 ай бұрын
@TheProvokedPrawn figured it out, it was software related, I needed to add one more to the chain in i-connect. Appreciate you responding
@ricardas_owp7218 7 ай бұрын
Hello!🤝, is the standard power supply suitable?
@TheProvokedPrawn 7 ай бұрын
Standard ATX PSU will work
@ricardas_owp7218 7 ай бұрын
@@TheProvokedPrawn thank you!! Good day to you🤝👍
@fernandorey7743 7 ай бұрын
What program do you control the cabinet lights with?
@TheProvokedPrawn 7 ай бұрын
Your motherboard RGB lighting assuming you've connected the 5v cable to your motherboard
@fernandorey7743 7 ай бұрын
@@TheProvokedPrawn And from the motherboard with what program do you control it? with aura sync? Icue? or lian li has his program?
@Rouladen1 8 ай бұрын
You only have 3 intake fans ?
@TheProvokedPrawn 8 ай бұрын
The plan was to swap to reverse blade fans kzfaq.info/get/bejne/qbx1i8devNacdo0.html
@bluexenoverse1878 6 ай бұрын
how do i turn on the argb trip from case?
@TheProvokedPrawn 6 ай бұрын
You need to connect the power.
@TheRivermat31 5 ай бұрын
Hello again can’t find where buy anti sag bracket
@TheProvokedPrawn 5 ай бұрын
It should be included with the accessories box in the case?
@ItsDazoe 5 ай бұрын
Need this screwdriver
@Mr_DipUrBish 4 ай бұрын
I don’t understand how you can buy this product and they send everything but the fan controller
@nielkotze 17 күн бұрын
You should audition to take over from David Attenborough. You have such a soothing voice.
@TheProvokedPrawn 17 күн бұрын
I don't like nature though 😂😂 jokes, obviously I do but not as much as him. I'll just have to be the Attenborough of tech
@nielkotze 17 күн бұрын
@@TheProvokedPrawn We already have a "Tech Jesus" lol (Steve from GamersNexus). Attenborough of Tech sounds like a grand title.
@7Fauday Ай бұрын
Can I use a vertical GPU mount?
@TheProvokedPrawn Ай бұрын
Yes
Jason Derulo
Рет қаралды 10 МЛН
Gaming Rigz
Рет қаралды 953
Archetype Origins
Рет қаралды 235 М.
Designs By IFR
Рет қаралды 118 М.
DH Animation RUS
Рет қаралды 1,5 МЛН
NONIKZ GAMES
Рет қаралды 39 М.