Thanks for the info, just what I needed and not skipping over the important parts like some people do 👍👍

Thank you for making this vid. I wanted these cables but couldn't find a detailed video about them.

Thanks so much for this video buddy, just like Player de la ligue I've been wanting to know the answer to this question for a while. I couldn't believe Lian-Li would release a product where you have to either have the side of your case off to access the controller or find a way to mount it externally which isn't going to look good but this gets round the problem perfectly. I recently built myself a new system using the Corsair QL range with the H150i Elite Capellix, Corsair Vengance Pro Ram and a coupe of strips, the whole set-up was just over 2k and I expected this build to last me the next 10 years like my last i7 build however these new Lian-Li Uni fan range along with the strimer plus cable have really got my appetite going to build another, the design and delivery of the argb on the fans I think are so innovative, and when you consider the ease of connection along with the abily to run up to 12 fans safely then I think it's got to be done, and done within the next 6-12 months just so I can sit, stare, and smile, this time though I'm definitely going for the Lian-Li system along with the Kraken Z73, this system will be White so it should look quite nice when it's done. Thanks again buddy, I have really enjoyed working my way through your videos, new subscriber too..

Been looking for a video like this, thank you so much! I will get this cable and see if I can get it to work.

You answered what have ive been looking for thanks

Thank you so much! I didn't even know the remote had to be pressed to move the sync to the motherboard. You saved me hours of troubleshooting!

World greatest help! Do you know how many videos ive had to go through to find yours! Thank you thank you thank you!!! Subscribed!

Thank you very much friend for this tutorial, I did it as you explain it and it worked very well

Very Descriptive & Informative! Definitely good content. Subbed! 👍

Thank you so much for " hold for 3 sec thingy" , i was actully gave up trying to sync to my motherboard.

Very clear in your explanation. Thank you so much.

Thank you so much!! Didn't know about pressing the M1 button to enable ARGB management by the motherboard 😍

Thank you very much for the Details!best man!

This helped out so much fixed my issue of me not understanding the product fully I thought I needed to have more cables then just the sata power for rgb controller affects to work! Thank you so much! Also Ik you put a lot of time into these I was wondering if you heard any about connecting a razer o11 dynamic to a uni hub/ anything in L connect because I use razer synapses rn for my light strips on the case itself:)

This is literally the perfect solution I was trying to look for. Control by PC software without affecting other RGB fans I have in the PC build. 9:20 - Where I can buy this device? I couldn't find it on Lian Li's website.

Lian Li should include that conversion cable in either the strimmer or uni fan kits (preferably both). Since both products are compatible, they should come ready to connect imo.

Hey, I love your videos man. Great way of explaining everything. I got the Lian Li O11 Dynamic XL case, Lian Li Glahad 360, Strimmer Plus 24 Pin and then I have 7 x Lian Li SL120 Uni Fans (They came with 2 x Fan Controllers). My motherboard only has 2 aRGB headers and I cannot get all RGB's working since I never got the Lian Li Cable Kit you recommend. Is there any other options for me, I want to use my motherboard to control RGB's. In one of your videos, you mentioned connecting the Strimmer Plus directly to a Lian Li case? Is there a work around at all here?

Best video on these cables. A few downsides to this setup though is the effects are very limited compared to what you get by using the strimer hub itself. Also, the lighting seems to flicker intermittently despite using the official argb cable kit and trying all ports on the unifan hub.. maybe it's just mine though

Hey I was actually just looking for this video and got the notification

at least someone make it very clear. thanks for that.

Thanks a lot for the tutorial and explanation. Just curious, given the way Strimer Plus's RGB header can be connected to the Unifan controller as demonstrated, can other RGB devices with 5v rgb header be connected to the controller, and controlled by L-connect, too? If this can be done then it'll be awesome. Right now I have some RGB devices connected to my MSI motherboard's RGB header but MSI's software is a disaster in terms of lighting effects.

Another great video, thanks for the clear information.

Well covered, Great review 👍👍

You make really helpfull videos..

Great video! Thank you. You mentioned a third cable that goes into the controller for use with the Lian Li Dynamic cases. I have an XL and cannot find out how to take advantage of that third cable. Any suggestions?

Explained everything....🙌🏽🔥🔥🔥🔥🙌🏽

Great video. I have the Strimer Plus and Uni fans and I want to use the uni controller for both.

can't thank you enough my man. I've been struggling to find the way to connect them to my motherboard!

great video, most thorough explanation of how these work that I've seen so far!

Thank you I was struggling, thx to you a working great. I did notice the new 3x8 in purple, which is my build colour is not as vibrant as the old 24 pin.. Thanks for making this.

Awesome I dont think I wired mine correct since MB does not pick it up so will redo this weekend

Thank you for explaining this very well. The thing I am unsure of is where to connect the 3pin bypass cable on my motherboard? is it on the 5v add gen 2 connector?

Thank you! Very helpful

You deserve way more subscribers than this man. thanks.

Awesome video man. I just want to ask how to config the strimer plus controller and uni fan controler in order to use 10 SL120 fans + 24-pin Strimer Plus + 8-pin Strimer?

Beautiful Video :) Well made man

Man would love a video on doing the strimer plus + 9 uni fans to the uni controller. I just got the Lian li argb kit

great video, im subscribed !! question for you: what else could i use the strimer cable for in my new build chassis instead of putting it on the GPU cable. i have the lian li strimer 24 and would like to find a good place in the chassis (Lian Li EVO) to put it. i think it would be cool to put it somewhere but where I don't know, my current white ANTECH cables look so good (16 AWG) that I don't want to ruin the effect of those cables. HELP

Great video. Question, do you think it’s preferable to have them controlled by motherboard or by the switch? I haven’t played with it too much yet but figured I didn’t want to keep opening my case to change effects so maybe motherboard is easier. Controller effects seem really cool though. I don’t know what type of effects my pc offers yet though as I just finished the build and haven’t hooked it to a monitor yet.

You're the man bro. Thanks for your help b

Hey man thanks for the info on the commander pro - just another quick one; on the “unifan” how many RGB connectors are there? I want to power the 8+24 pin as well as 3 other lian Li RGB fans (AL120) Do I need to buy a “daisy chain” for my fans to connect into the one port or are there enough on the unifan ??

Simple and clear. Thank you! but if we want to connect the 3 pin argb to motherboard directly how le? Any suggestions?

First of all thank you for all the good videos! Second of all. I connected the Strimer Controller to uni fan sl Controller successfully. However if I press and hold m1 the strimer turns off. If I start using L connect 2 the strimer won’t react to anything. Any recommendations? Unifan is working fine. I already tried to use channel 3 or 4. Also I turned of my computer once and unplugged the PSU.

Very well explained 👍👍

Nice video,super best tutorial!

Thanks for this!

Great video! Question for you though if you can please help me out. I already have the 24pin and triple 8pin Strimer Plus's, and have 10 sl120 fans on the way. Would it help me out rgb power wise if I use 1 hub for all the 10 fans, and then another hub to run to just the Strimmer Plus's. I've seen a few posts around the web about rgb flicker due to power so my thought is using one of the extra hubs would fix.

Great review!

This is such a good video. I only have 1 rgb header on my MOBO so it’s important that I use the provided controller. Just wanted me question, how do you turn on the cables once connected?

Thank you for this very informative video. For the 8+8 pin strimer plus, will it still work on a gpu with only a 6 pin connector? My gpu has a space where I can just tuck in the extra plugs but I don't know if the lighting will work

Ty so much for your videos. I have a question. I can have 24 pin and triple 8 pin streamers along with 10 fans SL fans connected with the argb kit into the hub with no issues correct?

Thank you for the video! Can I get that single argb cable you hold up at 9:04 somewhere? Or do I have to buy the whole argb cable kit? Also, if I'm using strimer pluses and uni fans, can I plug the strimer pluses into my Mobo directly, the uni fans into the controller and then into the motherboard, and control it all through L Connect? Thanks again!

This was very helpful. If you can make a video on the strimmer plus triple 8 pin and syncing that with the 24 pin and uni fans.....that would be really helpful!

Hi, Loving all your informative videos. Keep up the good work. Are you or have you ever considered contacting Lian Li for a sponsorship? Your videos would be an excellent asset for them. Thanks for the vid's.

OMG thankyou i dont know that i have to press the m1 for 3 sek THANK YOU

Thanks man!

Hey thanks for the video. I have a question aboout at minute 10:00 . What if 1,2,3,4 of the bigger cable input thingies are used. Can you still use converter thing Y Splitter cable for it to work? I have the SL Inf UNI Hub with i think 2 of the Y Splitter thingies and one is used for my AIO Pump Fans.

Thanks for the informative video. So, how you can connect 24-pin strimer plus to the A-RGB 3-pin splitter (for example, of DeepCool case's), not directly to the motherboard? Is is possible without problems?

Great video! Only issue is that the cable kits aren't really available in the US and if they are they are price gouged. All I need is the converter cable from the Strimer based to the Fan Base. It looks like a $1 cable and I really don't want to pay $150 for it. Problem is I can't find the name of the 3 pin female connector that plugs into the fan base unit. I can extend it or even make the cable myself but I can't find it! Do you know what the name of that 3 pin female cable that has the little clips on the side? 3Pin 5V to 3Pin (4 Position) ARBG female header? Thanks

I’ve been wondering about this!!! Thank you so much. My only issue is that I’m already using all 4 ports of the uni controller. I wonder if the strimer controller output can connect to the unifan argb (instead of to mobo) and the strimer box would output its 18 effects to the fans...

I bought the convertor like you suggested. My strimmers are now in sync with my 9 uni fans and can control it via Lconnect. But since the argb is connected to the hub I can no longer control and sync everything via armory crate. Is there a way to get all fans and strimmers to sync with alru chat on top of being able to control all fans and strimmers via LC?

Hi, regarding your comment at 1:20 where the 3rd cable can attach to the 011D case - where does the end of that cable attach to in the case? I have the Strimer + 24 pin and a 011D case and I wanted to control the animation externally somehow as the hub is stuck inside the case. I am connecting the aRGB directly to the motherboard.

Great video! btw I have a question regarding the Lian Li Uni fan controller. My setup has 24pin cpu Strimer and gpu 3x8pin Strimer with 8 unifans for case fan. All the ARGB socket on Unifan controller are already occupied, do you think I can make use of a ARGB splitter to connect my Strimmer Plus controller to uni fan controller? Right now my Strimer cables can only be controlled separately by its controller. I want it to be connected to Unifan controller so I can sync the lights.

I notice you mentioned you have to purchase the argb cable kit to get that cable in order to connect. It's about 20 USD where I am, was wondering if you think it would be a cheaper option (7 USD) to buy a ARGB 1 to 5 splitter cable and plugging the fan controller into 1 and the strimer controller into the other? Would that still allow to sync since they are both connected to the MOBO through the ARGB header

hey man thanks for a vid! Quick question can this Lian Li software sync with asus or nzxt cam?

so i bought a 3 pack of 120s SL-infinity fans, 2x 140 sl-infinity fans, one 24 pin strimer and one 12vhpwr strimer. I saw the multiple controllers and freaked out lol. so i need to get the converter, from 3pin argb to 3 pin "fan header" to plug the strimer control box into the fan hub? does that sound right?

Does the 8 pin and 24 pin come together if you order the lian li strimer plus? Or do I need to purchase both seperately?

Do you have to buy any any extra parts and this video or do they all come with the fans and cables

Hi bro! Awesome video on how to. But 1 question, i'm having a hard time sourcing out the conversion cable. Any idea where i can score one? Instead of the Lian Li one.

Hi, great video for references. Btw, im trying to sync strimer plus 24pin and unifans like you just show in the video. However ive tried by using the unifan given splitter (2 male, 1 female), connecting it between both of the controller argb input and plugging on the female into mobo. However, it seems that my method is not work as it is only change the colour of the unifans only..Is my method is unapplicable??

Followed your vid and bought lian li argb kit. Connect strimer to al120.. the cable melted. Lol

can you do a video on how to used the icue pro with lian li uni fans plus strimers

Is there a way to get more lighting patterns for the lighting software

hi geat video BTW.. i have a question if i buy only 8Pin (connect to mobo only), can i still customize the 18RGB?

Nice Video man keep it up love youre Voice nohomo

Thank you.

So I need to buy strimmers with control, the converter, and 3 pack unifan with controller to do the same what you just did.

Can you have the effects like Drizzling, but with a static colour background?

Hi do you know where I can purchase the ARGB converter? All of the cable kits are out of stock or highly marked up.. thanks!

Hey, Great video, I only bought the 8 pin cable for my gpu, can I plug these directly into the motherboard without the uni controller, I have one 12v JRGB controller on my msi b450m pro vdh max. As far as I understand the fan headers output 12 volts and the strimer only uses 5. I’m really confused on how to use only the 8 pin gpu cable without the uni controller.

Nice!👍

What if I dont want to use the controller? I just use that 1:02 cable connect to the strimer then plug the other end into MOBO 5V 3 pin argb header, yes? Or do I need a converter?

Hey kleo Is it possible to use only 1x 8pin cable since my gpu has only 1x 8 pin connector or is the strimer plus gpu cable only for 2x 8pin ?

I nevver understood that such a premium product is made with a manual controller and not, say usb controller so it can be fully controlled by software from the beginning. But can the uni fan controller make all the exact same modes as the manual controller can?

Can you do this with the Strimmer controller V2 and the Infinity uni Fans Controller?

Very useful thank you 🙏

awesome video! but how would i do this with the 10 fans i already have? I bought the Lian Li argb cable kit. i tried some stuff but its not working.

Hi bro, i watch that part of your vid many times. The cable that is needed to connect to unifan controller. Its a male 5v 3pin to female sm3p correct? The links u put seem to be female 5v 3pin to female sm3p. I wonder sim lim sells it? Cant find it online.

Thanks!

Hi, how would I connect or sync everything my motherboard? Here some parts I have: Lian Li Uni Fans 3x 120mm / 5x 140mm & Lian Li 24 pin Strimer and 8 pin Strimer. Case: Cooler Master C700P Black Edition & Motherboard : Asus Rog Maximus XII Formula. My case has RGB, so how can I connect my Case RGB directly to my motherboard or can I connect it to my uni controller? Thanks for your helpful videos.

I have a question so my argb on my motherboard is occupied by my fans and was wondering if I could plug in my Corsair fans to the L connect if that would work and if I would still be able to sync the fans and the cables

Hi, sorry, I have a question. For the bypass, whenever I turn on the PC I must press the m1 button or it has some type of memory and remains in bypass mode

When you press the M1 for three seconds to connect to the software of the motherboard. Do you press it again for three seconds to disconnect to the software?

can I connect the third cable ( I mean not to sata and not to argb motherboard cable) to my cooler master sickleflow fans? And can I control them with that controller?

I know this is a stupid question but where do you get that 2 pin to Mobo cable? I got a strimer 24 plus but that didn't come with it?

Thank you very much. It was a great explanation. Please, if possible, I want the program with which to write commands for a device LED controller 🌹🌹🌹🌹

wondering if the unifan controller argb port are not enough, is it ok to use a argb splitter connector to connect the fans first then convert it and connect to the uni fan

So If I watch to controller it with the software I just need to conect it to the 5v ARB on the motherborad. Soni don't need any other other 3 way to conect it meaning psu or sata,micron b usb way? Thanks

hello brother, so I bought the strimer 24 and the strimer 8 pin, I can also connect them directly to the motherboard without connecting the transformer for the fans, does it work the same or do I have to take it?

Hi, can I use the 24 pin mobo Lian Li Strimer without the controller? Maybe connect it to 3rd party argb controller or using the mobo argb header?