Lie Nielsen Router Planes Product Tour

Рет қаралды 121,218

11 жыл бұрын

In this product tour, Morton shows us the 2 styles of the Lie-Nielsen 271 Router Plane (both closed-throat style and open-throat style) and discusses each of their advantages before doing a similar run-through for the Lie-Nielsen Large Router Plane.
www.highlandwoodworking.com/li...
www.highlandwoodworking.com/li...

Пікірлер: 27

@starvingpoet81 11 жыл бұрын

I cut all my tenons by hand and the router plane is how I can ensure that my tenon cheeks are 100% in plane with the board. I can't recommend these planes enough. They're in my top 5 manual hand tools that every woodworker should own.

@m4xfl4xst4r 4 жыл бұрын

the "open throat" is for chipout. If the router is being used in a situation where you may be running over chips, the open throat is the choice. The chips have someplace to go other than under the router and they can be blown away as you go. If you're already working at a depth, such as tails and pins, either router is fine.

@paulharries9058 5 жыл бұрын

Lie Nielsen now make a depth stop for the small router planes.

@pinkiewerewolf 10 жыл бұрын

Great review on the line of routers. I have the large open throat router and I need to pick up the small closed throat, one of these days. Your tip on routing two tenons at once is great, it has gotten me thinking about the ability to do four at once so the adjustments are equal on four corners and I'm not making so many adjustments.

@laurencemedina7851 7 жыл бұрын

Amazing presentation

@smfield 11 жыл бұрын

Informative and enjoyable!

@PastorHinChrist 7 жыл бұрын

Awesome- your a legend!

@fuerzalatina134 2 жыл бұрын

very interesting video!! very well explained, congratulations!!

@robertbrunston5406 6 жыл бұрын

Very nice! Thanks.

@jobranch1 11 жыл бұрын

Nice video!

@robertbrunston5406 6 жыл бұрын

Thank you.

@lunhil12 8 жыл бұрын

Tossed between this and the Veritas. I like that the Veritas comes with more than one blade though.

@ddyrock 4 жыл бұрын

Vielen Dank😀

@T3hJones 11 жыл бұрын

Never thought of using router planes on tennons!

@arboristBlairGlenn 11 жыл бұрын

Very good presentation

@daveyJ213 8 жыл бұрын

How deep a cut can be made, i.e. can the blade be lowered to a depth of say 2.5" in order to clean out the bottom of a large square tenon?

@HighlandWoodworking 8 жыл бұрын

Unfortunately the maximum depth of cut on the large router plane is 1". For trimming a joint that's deeper than that, perhaps either a chisel or a shoulder plane could be used (depending on the size and nature of the joint).

@allansolomon2137 6 жыл бұрын

Should read desired thickness of tenon not the width.

@13girly1 11 жыл бұрын

coool tool

@Andersoncust 11 жыл бұрын

You forgot to mention that the cutter can be flipped around 180 degrees to get into corners and things better.

@dariocarafa3788 4 жыл бұрын

I've been waiting to see someone demonstrated I'd like to compare it to the veritas but it seems like nobody knows that it can do that or nobody cares you can flip it and use it full nose on all lie Nielsen router planes and I just want to see it

@bigkiv47 3 жыл бұрын

turning the blade around in the closed throat small router makes it an open throat. Very versitile so no need for an open throat version really

@utubecomment21 8 жыл бұрын

What screw driver is that?

@HighlandWoodworking 8 жыл бұрын

+utubecomment21 The screwdriver is the Lie-Nielsen Screwdriver for Chipbreaker Screw: www.highlandwoodworking.com/lie-nielsenscrewdriverforchipbreakerscrew.aspx

@utubecomment21 8 жыл бұрын

Highland Woodworking Thanks.

@utubecomment21 8 жыл бұрын

Great, they're available in the UK - www.axminster.co.uk/lie-nielsen-tool-specific-screwdrivers-ax460429

@738polarbear 7 жыл бұрын

So why can you not just reverse the cutter in the closed throats and now you have an open throats in one tool ..This is just a money grab by Lie Nielsen