Lifetime 150 Gallon Deck Box | Lifetime Assembly Video

Рет қаралды 99,663

Күн бұрын

This is an assembly video for Lifetime 150 Gallon Deck Box
Model Associated: 60215, 60362, 60251
If you are still having assembly issues after watching the video, please give our customer service team a call for more assembly help 1-800-225-3865 Opt. 2.
To jump to a specific step, click on the time stamp associated with the step. (For mobile devices, time stamps are down in comments.)
0:00 | Intro
Section 1
Step 1.1- 1:35
Step 1.2- 1:44
Step 1.3- 1:47
Step 1.4- 1:54
Step 1.5- 2:09
Step 1.6- 2:32
Step 1.7- 3:00
Step 1.8- 3:25
Step 1.9- 3:38
Section 2
Step 2.1- 4:06
Step 2.2- 4:30
Step 2.3- 4:36
Step 2.4- 4:48
Step 2.5- 5:10
Step 2.6- 5:32
Step 2.7- 5:41
Step 2.8- 5:58
Step 2.9- 6:12
Step 2.10- 6:18
Step 2.11- 6:27
Step 2.12- 6:34
Step 2.13 - 6:51
Step 2.14- 7:33
Product: www.lifetime.com/lifetime-602...
Give us a follow on social media!
Facebook: lifetimeproducts
Twitter: Lifetime
Instagram: Lifetimeproducts

Пікірлер: 107

@LifetimeProductsAssembly 4 жыл бұрын

Time Stamps: Section 1 Step 1.1- 1:35 Step 1.2- 1:44 Step 1.3- 1:47 Step 1.4- 1:54 Step 1.5- 2:09 Step 1.6- 2:32 Step 1.7- 3:00 Step 1.8- 3:25 Step 1.9- 3:38 Section 2 Step 2.1- 4:06 Step 2.2- 4:30 Step 2.3- 4:36 Step 2.4- 4:37 Step 2.5- 5:10 Step 2.6- 5:32 Step 2.7- 5:41 Step 2.8- 5:58 Step 2.9- 6:12 Step 2.10- 6:18 Step 2.11- 6:27 Step 2.12- 6:34 Step 2.13 - 6:51 Step 2.14- 7:33

@incredibles11 3 жыл бұрын

Step 2.4 I am struggling. The holes don’t perfectly align with the lid where it’s supposed to be screwed. Is there a certain way I am supposed to do it? Is mine defective? HELP!

@LifetimeProductsAssembly 3 жыл бұрын

@@incredibles11 if you completed 2.3 correctly (the tab in the notch) that is all that matter. The holes on the lid it's self is just togive you an idea where you should drill. If you are at least close to the holes you are fine to drill with out compromising the assembly.

@YesterdaysVillage 3 жыл бұрын

Love the Deck Box and this is a great video! The deck box came with decent instructions and adding in the video made it a snap to put together. I'm a 70+ woman and over the years I've put together my fair share of furniture. That being said this was not difficult. It took me maybe 45 minutes and that includes correcting a mistake that was my fault. I put together the lid bar and locking hardware improperly. It was a quick and easy fix.

@ragdoll4856 4 жыл бұрын

Just finished putting mine together and I love it! An instruction manual came with mine and I also search on line for a vid and found one! It was very helpful!! The lid closed perfectly and I am very happy with my purchase!!! Good quality too!!

@davidmiller88ify 4 жыл бұрын

Just assembled the same unit. Wish the screws fit as easily as yours did. Also kind of ridiculous that in many places the plastic was not drilled through and had to use a drill or Screwdriver to get the nut through. Also, I am missing a nut for the screw that attaches the lid to the body. Nice unit, the assembly would be much easier if the screws could fit in the holes provided.

@karunald 4 жыл бұрын

Get a better drill. It's plastic.

@vincentjr101 3 жыл бұрын

@@karunald You missed the point.

@Ganja1974 3 жыл бұрын

yeap, they are toooo small for holes

@sh0rtybgoodz3 3 жыл бұрын

@@karunald the locking rail is metal. It’s indeed ridiculous that the holes weren’t appropriately sized.

@tomwelty7637 3 жыл бұрын

Put this together by myself. Went together perfectly. My only hiccup was putting the locking tab on the metal rod backwards. Had to take the bolts out and flip it around. No big deal.

@csmusix 3 жыл бұрын

The lid should come assembled.

@johncrewdson5883 Жыл бұрын

What a great system. I really impressed. Good value

@billjonesmusic1 3 жыл бұрын

Took a little time but got it together and everything works fine. My biggest problem was “assemble with the hardware” but which hardware. Would have been helpful if the person in the video showed more closely which hardware he was using with each step. Also, the nuts, screws and parts were all there but seemed to be in random different bags so it took awhile to figure out what goes with what. That said, after a little head scratching and about a dozen different attempts to figure out how the long metal locking rod fit, we do it done and are happy with the end result.

@LifetimeProductsAssembly 3 жыл бұрын

Thank you for the feedback! We do list all hardware used on the right side of the step that is being performed. Our videos are based of the instruction manual so it is recommended to have that available while assembling with this video. In the manual, at the beginning of each section, you will see the hardware used as well and what bag it is needed. If your confused on which hardware is what, you can hold the actual hardware to the manual because the pictures are designed to be the same size of the actual hardware unless labeled otherwise.

@andremartin6157 4 жыл бұрын

Love the vid instructions

@kofiagyare8010 4 жыл бұрын

What size nut setter(drill) do we need for the hinges

@millos83 3 жыл бұрын

Thank you

@victorong1447 Жыл бұрын

Hi, what specific nut/bolt socket did you use for 2.1. Thanks

@wrose-cz7yc Ай бұрын

having a problem with putting hinges on- cannot get them to click in

@Silverstar22b 3 жыл бұрын

thank you!

@johnstoneley7520 3 жыл бұрын

I am with Dusty! Although we had an instruction manual we had no power tools! If you are used to Ikea flatpack you will find this far more challenging. Not to be attempted by the faint-hearted. we hope to finish tomorrow!

@skinman8 3 жыл бұрын

Is there some kind of trick to get the front and back to slide to lock. Mine will not slide in place at all. Almost seems like the tabs are a hair short.

@beelight13 3 жыл бұрын

@skinman8 did you ever figure this out? I can’t get mine to slide on either

@skinman8 3 жыл бұрын

@@beelight13 I ended up putting Vaseline on the tabs where the sliding happens. Also had to shave a hair off a couple slots. I hope this helps.

@betsym.3193 3 жыл бұрын

@@beelight13 I had to chisel away at the grooves along the bottom so they were an even rectangle in order to get the pieces to fit.

@nimageofmine 3 жыл бұрын

I just used a mallet and that did the trick.

@manisharooni 10 ай бұрын

@@skinman8thanks for the tip! The Vaseline and a heavy man did the trick! 😅

@nimageofmine 3 жыл бұрын

@Lifetime Products: The one I got from Costco today has screws quite larger than the holes in the hinges. Although it clearly mentions it in the instructions about it, I still couldn't get the screw inside the hinge hole even with a drill. Any thoughts on how to address the problem? I can try drilling a larger hole or may be buy a smaller screw.

@LifetimeProductsAssembly 3 жыл бұрын

It may be easier to use a socket and a wrench to give the screw a head start. It will take a couple of turns at first to get it started but as soon as you see that it's going through, you can start using the drill again. This may be easier to do before actually connecting it to the lid. If you're still having troubles, please reach out to our customer service team. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@nimageofmine 3 жыл бұрын

@@LifetimeProductsAssembly Thank you. I tried a bunch of things and the trick was the angle. If I don't screw in straight (90 degrees), I had a really hard time even with a wrench. In short what you recommended + the angle. It will still hard, so I am curious. What is the reason for keeping the holes smaller? Instead, if the holes were slightly larger, how would that be an issue?

@trump8ster 4 жыл бұрын

Just bought this from Costco this week, Actually I bought two of them. It is the same item as listed in the video, but the Costco Model # 60340U Lifetime 150-Gallon Deck Box. (and I picked them up for just $99.99 each) Followed this video and along with the written instructions, it was a PIECE of cake. Instructions on this video made if go very smoothly. I could not be happier with my purchase. everything aligns perfectly if you follow the instructions in the video. and also look at the instructions that come in the box. It helped to have a drill and an impact driver. Also having both a Philips bit and sockets for the impact driver made it soooooo much easier than if I would have had to do it without.

@captmrgn7040 4 жыл бұрын

trump8ster I 2nd this post. I just bought 2 at Costco $99ea. I did not have the socket bit so had to use the f’ing flat head bit which was a small pain in the ass, but doable.

@timwilson7927 4 жыл бұрын

@@captmrgn7040 how is it holding it up to the elements?

@karunald 4 жыл бұрын

@@timwilson7927 It's thick plastic

@bugnyablasta8783 4 жыл бұрын

@4:19 - did he say Deeez Nutz ?

@margarethenson147 4 жыл бұрын

Ours went together, thanks for the instructions. The metal lock hooks on top and bottom are meeting each other, have to give the lid a pull to the right to get it to close properly. It will not close by itself. Seems to be durable, but not happy with the lid not closing correctly.

@LifetimeProductsAssembly 4 жыл бұрын

I'm sorry you're having trouble. Give our customer service team a call and we can trouble shoot the issue with you and see if we can help figure out what's happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@karunald 4 жыл бұрын

Because they are Defective! You have to force the lid down on one end because the sides of the box are wider than where they should go inside the lid. Mine is 1/4" at least. I need TWO HANDS to get it to close right. Now I have to dismantle it and take it back to Costco! Old 130g lifetime is way better, easier to build. But it has no lip to grab to open the lid but a tiny area in the front middle

@karunald 4 жыл бұрын

@@LifetimeProductsAssembly There is a recording stating they are not taking calls.

@albert2araujo 3 жыл бұрын

Wonder how much wait it can carry inside say if I were to move it from the back yard to the front yard on party occasions. On that note can it hold the weight of people sitting on it?

@LifetimeProductsAssembly 3 жыл бұрын

The weight capacity of this deck box is 900lbs, however, the deck box is only designed to store items not to be sat on. And yes, you can move the deck box if you decide to do so.

@francisingua12 3 жыл бұрын

Just purchased this one at Costco lid locking tab was defective the notch was on the left instead of right which I’m unable to install to the lid. Please help

@LifetimeProductsAssembly 3 жыл бұрын

We'd love to take a look at the defective locking tab. Please contact our customer service department with your model number and product id that will be found on the cover of the instruction manual. From there they will get some pictures and help you further assemble. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@davidharkacz8092 4 жыл бұрын

Is there a trick to the gas springs? The ends that attach closer to the hinge fit easily but the other ends closer to the middle of the box are impossible for us to get on. Not sure if it's just a defect or what.

@LifetimeProductsAssembly 4 жыл бұрын

@karunald 4 жыл бұрын

Are you sure you have your hinges on right? The top part that attaches to the Lid should be on the inside.

@tommcculoch7264 3 жыл бұрын

@@LifetimeProductsAssembly Can you tell me if both hinges are the same or if there is a right and left hinge (part F00). If they are the same how can they BOTH be facing the inside? Thanks Tom

@juanavalos4232 3 жыл бұрын

He screwed up the latch on the bar part. Also would have loved a little more detail as to the hardware part.

@naednek 3 жыл бұрын

I can't get the two side walls to slide on the bottom

@LifetimeProductsAssembly 3 жыл бұрын

This step can also be accomplished by hitting the wall panels with a rub mallet. Just tap it hard enough where you feel the slide. If you continue to have problems, reach out to customer service where they can trouble shoot some ideas with you. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@vincentjr101 3 жыл бұрын

Do I absolutely need a drill, or is it just recommended?

@LifetimeProductsAssembly 3 жыл бұрын

A drill is needed, and impact drill is recommended.

@juanitarodriguez8078 7 ай бұрын

Viene en español el vídeo

@tommcculoch7264 3 жыл бұрын

Can someone tell me if the left and right hinges are supposed to be the same (mine are). It seems that they should be different so they can both be flush with the box. Thanks Tom

@LifetimeProductsAssembly 3 жыл бұрын

They are the same hinges. The trick is to turn the hinge that you haven’t assembled yet upright so you can get that flushed fit. If you have any further questions, please contact our customer service team. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@larryyancey6443 3 жыл бұрын

I found that the video was very helpful except the video and the assembly manual are both very lacking when it comes to the installation of the hinges. It took me as longer to figure out the hinges as it did to assemble the entire unit. Please modify the video and the manual to add more details on the installation of the hinges. With that said, I am impressed with the box. I did not install the locking tabs as I don't intend to lock it. I noted that several people called the unit "junk".

@123craftygal 3 жыл бұрын

Same here. We’re not sure if we got 2 identical hinges or is there a R and L hinge?

@tommcculoch7264 3 жыл бұрын

@@123craftygal Hi Catherine- did you receive an answer from Lifetime regarding if there is a left and right hinge? I’m having trouble figuring out how to install that right hing Thanks Tom

@merlindiaz7855 4 жыл бұрын

why there are not instructions inside the product box?

@LifetimeProductsAssembly 4 жыл бұрын

Oh no! I'm sorry you didn't have instructions. You can find detailed instructions on our website lifetime.com when you click on assembly help all the way on the bottom located under customer service section.

@sriontube 4 жыл бұрын

Is it water proof? Can I leave my lawnmower inside?

@LifetimeProductsAssembly 4 жыл бұрын

Our products are water resistance. This product in particular wouldn't fit a lawn mower but our horizontal sheds would. Check them out www.lifetime.com/lifetime-60296-horizontal-storage-shed-75-cubic-feet

@AM-un5eb 4 жыл бұрын

I bought this model today and followed your video Upto stage 2.4 I stopped at the bar as the metal rail was not aligning correctly to preset area where the screws go in.Very disappointed returning tomorrow,waste of my precious time !!

@LifetimeProductsAssembly 4 жыл бұрын

We're sorry for your frustrations with assembly. Reach out to out customer service team for some further assembly assistance. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@henzbikertv916 4 жыл бұрын

I just bought this today at costco for $99. If u have the right tools, it makes assymble a lot better. Been wanting this for a while.

@davidmiller88ify 4 жыл бұрын

It is amazing that they cannot properly drill the holes for screws/nuts they provide.

@JHsillypantsMcGee 3 жыл бұрын

@@davidmiller88ify I think that is intentional so that the screws will bite into the plastic

@gypsy_gina 3 жыл бұрын

Let’s be honest this is a great box. However I had quite some difficulty once I got to the top. I must’ve stab myself at least three times. I’ve got all the necessary tools and I have a drill I just think my drill is too big to get into the small space. I literally have given up on this box and I’m trying to find somebody that I can hire to at least put the top on. It’s absolutely ridiculous I’m sure somebody with some skill can do it in two seconds however I can’t. Let’s just be honest there’s Holes that need to be drilled. I am so over it!

@joshsanchez5637 4 жыл бұрын

Why doesn’t it come with a manual in the box. I recommend you guys give the buyer a manual and make it simple.

@LifetimeProductsAssembly 4 жыл бұрын

It should come with an instruction manual. If for some reason your product did not, assembly manual and can be downloaded from the manufacture’s website at lifetime.com under the model number. You can find manuals by scrolling all the way to the bottom of the web page and clicking on "Assembly Help". You can then search all products by model number and language.

@rajeevaswal2377 3 жыл бұрын

Bought this from Costco, no instruction manual in packaging. Saw this video to assemble, very bad Engineering and video many times doesn’t show or say the orientation of objects . Different sizes of screw and bolt. Need to keep different sets of pliers/wrench .

@LifetimeProductsAssembly 3 жыл бұрын

That shouldn’t be the case. I recommend contacting our customer service team and sending pictures of your product to see the hardware you received and see how we could’ve helped made this a better experience for you. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@zacharyvought5597 2 жыл бұрын

This box isn't for someone that doesn't have the correct assembly tools. I got instructions, but they were in German. Also- lid doesn't line up correctly.

@LifetimeProductsAssembly 2 жыл бұрын

I'm sorry that you're having trouble assembling. We'd love to take a look at what may be causing the lid not to line up. Can you email us pictures to customercare@lifetime.com?

@robynschutze5628 4 ай бұрын

Holes do not line up so get ready to drill your own

@eddy2561 3 жыл бұрын

Great video!! thanks.......the written instructions are horrible, confusing and typical of the crap instructions these days....I won't even bother with the written manual

@sonchan3621 9 ай бұрын

how much?

@LifetimeProductsAssembly 9 ай бұрын

Our 150 gallon deck boxes are typically $299.99. Here is the link: www.lifetime.com/deck-boxes

@hnguy054 3 жыл бұрын

Don't buy this box unless you want to use it as a coffin to bury yourself building it. Came with flat head screws to drill... like wtf? Nothing lined up and the springs didn't fit. This is pure trash... so i guess you can use it as a garbage can.

@LifetimeProductsAssembly 3 жыл бұрын

We're sorry that you had a difficult time assembling this product. Please contact our assembly experts to get some additional help on this product. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@hnguy054 3 жыл бұрын

Lifetime is a great name... it describes the time it takes to complete building this piece of trash.

@EVNYC 2 жыл бұрын

@@hnguy054 ok, that’s a funny line!!

@YGXXV1C 3 жыл бұрын

4:19

@LifetimeProductsAssembly 3 жыл бұрын

Haha, great catch!

@philais 3 жыл бұрын

Big Screw through a little metal hole. My drill would not do this and I am not buying another drill. Returned.

@tommcculoch7264 3 жыл бұрын

Agreed. I had to use a reaming tool to make those holes bigger.

@edpotokar2296 3 жыл бұрын

I wrote instructions for over 25 years for my company that sold products all over the world. I would love to give your writer some basic facts. Extremely poor information on hinges.

@LifetimeProductsAssembly 3 жыл бұрын

Thank you for your input. We are looking into issues for the hinge assembly to better help the customers.

@edpotokar2296 3 жыл бұрын

@@LifetimeProductsAssembly Thanks to the "hinge issues" my lid does not close completely. And thanks to the way it closed on first try, I have three bandages on one of my fingers and blood all over the place. Not a good Monday afternoon. When I spoke with customer service she was not sure how to answer this question. "WHAT IS THE LEFT AND RIGHT OF THE BOX? Standing in front or rear of the box? She thought "standing in front". Nowhere is that mentioned.

@edgarg2024 3 жыл бұрын

The assembly of this box is horrific.. steps are easy to understand but absolutely a dismal time doing the simple things. Nothing fits

@karunald 4 жыл бұрын

The Lid doesn't fit and I'm not the only one with the problem. The lid is too short to where one/both side walls/front corner doesn't fit inside. I built this perfectly with zero gaps in the walls during screw in. MFR defect. Costco. No wonder it's only $99. Bonus points for Customer Service not accepting phone calls because they're busy. Likely fielding calls from people with lids that won't go down properly.

@adamforgeron 8 ай бұрын

Not easy to assemble. Nothing fits well, no pre drilled holes. What part of assembling furniture do you need to do a step called "you may need to bend the metal" to make it fit. Just design it correctly in the first place... i feel like a lot of these reviews are fake. Good unit but be prepared for frustration with assembly. Easy fixes for design team.

@barbaralawson6943 4 жыл бұрын

Absolutely crap, nothing lines up buyer beware.

@juanavalos4232 3 жыл бұрын

The long bar that holds the latch to lock the lid absolutely didn’t match the holes and some persuasion was needed. Now I know why they tell you a hammer is needed.

@MMT858 3 жыл бұрын

horrible product. No pre drilled holes and the plastic that holds the hinges barely fits the screw. You could’ve put like a ml more of plastic to raise that spot up.