Using the Liftmaster #3800 emergency release, www.allproqgd.com pages/All-Pro...
Пікірлер: 48
@iacbinb4 ай бұрын
12 year old video - still got it!! Thanks a lot, man!!! Much appreciated!!!
@richiebenning5629Ай бұрын
Thanks a ton great video got right to the point. Told me exactly what i needed to know.
@WildBillTap Жыл бұрын
You have no idea how happy i am that you made this video. I lost my book and have been trying to figure it out. Thanks so much Brother!!!
@ALLProGarageDoors Жыл бұрын
Bildo you rock brother!!
@hdardon9064Ай бұрын
Thank you so much!
@mariopalumbo9898 Жыл бұрын
Perfect! I had no idea how to reconnect it after manually open it! Thank a million
@matthewoesch23644 жыл бұрын
Thank you! You saved me $80 service call!
@danmessinger66464 жыл бұрын
Thanks for the help, lost electricity and got myself out of the garage but couldn’t figure out how to reset the manual re-engagement! Much appreciated!
@ALLProGarageDoors4 жыл бұрын
No problem Dan!
@benlegault15312 жыл бұрын
Same!! Thanks for the help! 👍
@misterdp231885 жыл бұрын
Perfect video! Thank you for posting!
@robertweis85856 жыл бұрын
Thanks so much for your help! It was easy to reengage with your help.
@ALLProGarageDoors6 жыл бұрын
Abnormal Child Psychology ...... no problem at all, thanks for watching!
@SethPierceClimbing Жыл бұрын
Bless you. That was exactly what I needed
@shebert9 Жыл бұрын
Thank you thank you saved me a 140 dollar call!
@ojfire16864 жыл бұрын
You saved me a call! Thank you sir!!!!!
@ALLProGarageDoors4 жыл бұрын
Glad to be of service OJ!! 👍🏽
@calirider209 Жыл бұрын
Saved me too!
@tobinkirk25332 жыл бұрын
Thanks!!!!
@ohiovideo77652 жыл бұрын
Thanks for this Button seems to be my issue …. It is dim and appears to be shorting out
@ALLProGarageDoors2 жыл бұрын
they had many wallbutton problems. get an 880 LM and you’ll be good to go.
@jimreilly69332 жыл бұрын
Is there a danger of the cables coming off the drums when you lift that door manually ! Or do you only lift the door to the height of the dead bolt, and never all the way open.
@ALLProGarageDoors2 жыл бұрын
No they work fine manually with no changes or limits to anything.
@futbol19723 жыл бұрын
So is this just a garage door lock or is it tho replace the whole garage door motor?
@ALLProGarageDoors3 жыл бұрын
the whole motor
@craigborkowski6787 Жыл бұрын
Hi. I have the 3800PC and I had to use the manual release during a power outage. I was able to disconnect it with no problems, however when I went to reconnect it the manual release would not reconnect. It feels like something may have come undone inside the unit. How do I remove the front cover to have a look inside to see if I can reconnect what has come off inside the unit?
@ALLProGarageDoors Жыл бұрын
good question, we use a newer model now and i don’t really remember how the older ones come apart, maybe google a schematics. theres a screw above the plastic cover on top of the machine but that’s about all i remember.
@t_batman6545 Жыл бұрын
There are two 1/4 hex screws underneath. This was a few months ago so u probably figured that out by now.
@KevinMphotography3 жыл бұрын
You should come by my place and do that since that technique doesn’t work for mine LOL. I was able to get it in manual but now I can’t get it back to the automatic lift.
@ALLProGarageDoors3 жыл бұрын
some machines have had that problem in the past, normally you pull the rope down one more time and it clicks in but sometimes the cable on the inside can jump the pulley. At this point i'd take the cover off and take a look.
@KevinMphotography3 жыл бұрын
@@ALLProGarageDoors Yeah there is no lag in my cable, so I can’t get a click out of it. It pulled and released just fine, and I even reset the circuit breaker with no luck. Clicks the lock button and makes it sound like it’s going to open for a second, but then just sits there. Maybe I will just punch it
@ALLProGarageDoors3 жыл бұрын
@@KevinMphotography Does the led light inside flash you a code?
@KevinMphotography3 жыл бұрын
@@ALLProGarageDoors I put the garage all the way up instead of bringing it down while yanking on the cord and it actually worked.
@ALLProGarageDoors3 жыл бұрын
@@KevinMphotography Wow! better refrain from pulling that release in the future if at all possible. It should have connected in any position.
@futbol19723 жыл бұрын
So I am guessing after I install this one I can remove the one I have in the ceiling?
@ALLProGarageDoors3 жыл бұрын
yep, take it completely down.
@futbol19723 жыл бұрын
@@ALLProGarageDoors nice thank u very much for your help...and just to double check this will be the only think I need to open and close garage and also to lock it so nobody will try to break in?
@ALLProGarageDoors3 жыл бұрын
@@futbol1972 Yes sir! since that opener doesn't physically connect to your top section using a conventional drive arm like most machines do to keep your door locked they came up with this deadbolt type of lock that activates automatically when it closes the door. it's a great machine!!
@futbol19723 жыл бұрын
@@ALLProGarageDoors cool thanks
@PrecisionCSGO3 жыл бұрын
I pull my emergency release and the door doesn’t move up or down
@ALLProGarageDoors3 жыл бұрын
pull the release then push the remote, sometimes the machine is pushing down on the door so hard it doesn't release... other times the cable inside the machine has come off the pulley, and worse case scenario the release sleeve has broken.
@PrecisionCSGO3 жыл бұрын
@@ALLProGarageDoors hello, it worked, thank you, you saved me some $$, hope all is well, stay safe thanks again
@jimreilly69332 жыл бұрын
@@ALLProGarageDoors On the elite 3800 PLD model the machine or "motor" cant push down on the door. Since the door closes by gravity + torsion spring forces.
@johnropla96196 жыл бұрын
Realease Garage Management
@Kawoaa11 ай бұрын
Pull hard and it'll click
@debranystrom76302 жыл бұрын
Mine won’t renegade 😞 this thing has been junk since the beginning
@ALLProGarageDoors2 жыл бұрын
That’s surprising to hear because we’ve done so many of them and had so few problems. Occasionally i’ll come across one that is on a door that is way too big and heavy and it doesn’t function properly but most of the problems with these machines are caused by a bad install, the limits are not set correctly or the cable tension monitor is improperly installed… stuff like that.