I have used both of these programs extensively. I like both of them and use each of them for different reasons.
Пікірлер: 61
@terezapokorna86562 жыл бұрын
Thank you for these helpful videos! I just installed the LaserGRBL and I'm patiently waiting for my engraver machine to arrive :D I love your laugh btw
@soniamuniz28112 жыл бұрын
Thank you thank you. I just got a laser. And your vids are straight forward. THANKS for the comparison.
@Mellowdark173 жыл бұрын
Great video thanks I will use both. I like light-burn as a works space.
@69hytek2 жыл бұрын
So......I still need both Great video, a lot of effort has gone into making it. Thanks
@olid69799 ай бұрын
Excellent comparison, I mean once you mentioned lightburn is $40 I was decided 😅 thanks
@23names2 жыл бұрын
GREAT JOB ON THE VIDEO
@cosminnick86722 жыл бұрын
You have a way to adjust the brightness, contrast ... right click on image, adjust image . And you have more options
@rogercarter62123 жыл бұрын
On light burn you can adjust brightness and contrast, I accidently discovered this... click on the picture, then right click. A window will pop up and near the bottom it will say "adjust picture." Click on that and rhe adjustments can be made there
@debbiebarnett57295 ай бұрын
You must have and use both for the different abilities?
@knutevensen25648 ай бұрын
Hello - How to reset GRBL configurations (My setup for my Sculpfun S9 is wrong)
@MarcRCAddict2 жыл бұрын
Great video but it’s so confusing lol hopefully when I get my laser and start practicing things will make sense more.
@cinthiajudith48982 жыл бұрын
It’s now $60
@lydiajaramillo75053 жыл бұрын
Another thing to add is that Lightburn only allows you to license 2 computers
@schlotdoglaser2 жыл бұрын
good video. I don't version you were using for this demo (probably 09.20 or 24). I believe in 1.0 the adjustment feature was added. Pick the photo and RIGHT MOUSE and pick "ADJUST IMAGE"
@jujucattys1562 жыл бұрын
His m8 is dithering for a laser modual with just two wires + and - and pwm for ones with 3 wires
@lizt74442 жыл бұрын
Nice video! I’m new to engraving and still learning my machine…Can you tell me how to keep the transversal lines from engraving?? I have read some suggestions but they are just too detailed for a beginner like me! I have the Ortur Laser Master 2 using both Lightburn and Lasergrbl.
@brakthehun2 жыл бұрын
Your laser isn't turning off correctly during moves??
@lizt74442 жыл бұрын
@@brakthehun that’s correct! Between the moves in the white space, if I’m engraving words, there are lines. In addition , around an object, there is often a shaded border.
@brakthehun2 жыл бұрын
Sounds like your laser trigger signal isn't working correctly. Does the laser ever turn off??
@lizt74442 жыл бұрын
@@brakthehun yes, after about 30-45 seconds which I believe is the default settings. Weird part, I don’t recall this happening initially. I’ve only had my laser for about 3 months and I am still very much a beginner still learning.
@sherribarrett753 жыл бұрын
Hey Tony I am really enjoying your videos, but I am having issues when I go to engrave anything it comes out in reverse, I have tried to read on how to fix it and it is just all too confusing, do you have a video that shows how to change settings on LaserGRBL to where it won't do that?, I can normally figure things out pretty well but this program has me so confused. Thanks for any help.
@brakthehun3 жыл бұрын
In your console,, try typing in: $3=1 And see if that fixes it.
@sherribarrett753 жыл бұрын
@@brakthehun Thank you I will try that
@MrBadSeal3 жыл бұрын
@@sherribarrett75 well? inquiring minds want to know?
@taclackrivoglavac39773 жыл бұрын
cant i use it on arduino, or deferent motherboard.. diode module laser or co2....thx
@brakthehun3 жыл бұрын
There are many boards you can run GRBL on. You can use any of these boards to control a diode or a CO2 with almost all GRBL boards.
@SirMundoSantiago2 жыл бұрын
Thanks for the information, it helps me a lot.
@nikkicork88153 жыл бұрын
Why not use Shape Properties for images? Gamma, Brightness, Contrast, Enhance and others are there
@brakthehun3 жыл бұрын
I was not aware. That is useful. Thank you.
@danielperezmateo13112 жыл бұрын
I have a probler with laser grbl don’t making straight lines straights, someone with same issues?
@brakthehun2 жыл бұрын
X axis?? Y axis??
@MatNightingale2 жыл бұрын
I've converted an old unused 3D printer to a small laser engraver using a diode laser, but i'm having issues getting LaserGRBL to recognize it. I can connect and burn with it using Lightburn, but LaserGRBL times out every time, it detects it's connected to COM3 so I know it can at least detect it's presence. The printer runs a variant of Marlin so i've set that in LaserGRBL but have had no luck at all.
@brakthehun2 жыл бұрын
Gotta run GRBL firmware
@payola5000 Жыл бұрын
Hello, thanks for the video. Is it possible to make grids to test diferent materials on LaserGRBL?
@brakthehun Жыл бұрын
I believe there are files. I just try things but that's OK.
@payola5000 Жыл бұрын
@@brakthehun thank you, anyways
@jst1man6 ай бұрын
I think you messed some people up when you started going to Light burn and talking about Lasergrbl functions.
@CraftersWindow Жыл бұрын
Great video! Can I upload a svg file with lightburn and/GRBL to laser cut with Atomstack?
@brakthehun Жыл бұрын
yup!!
@ianmallett78UK Жыл бұрын
How much difference is there in the software from 2021 to the 2023 version?
@brakthehun Жыл бұрын
Not too much. They added some infill options for tracing and some presets for popular brands.
@CrazyFuzz8 Жыл бұрын
Do these softwares also work on windows 11?
@brakthehun Жыл бұрын
I believe so.
@andrealigesaddler83972 жыл бұрын
I’m very new to engraving. I literally know nothing. I just want to engrave words on bamboo candle tops. Is there something for that! I currently have lightburn. I don’t know what to do. Will I be able to even do this?
@brakthehun2 жыл бұрын
Lightburn is great for this.
@andrealigesaddler83972 жыл бұрын
@@brakthehun thank you. I’m trying to engrave but it’s not doing anything. Nothing is showing up on my candle tops. Is there a dummies for lightburn 🤦🏾♀️
@brakthehun2 жыл бұрын
@@andrealigesaddler8397 what color is the top?? If it's white,, then a blur diode will not engrave it.
@andrealigesaddler83972 жыл бұрын
@@brakthehun it’s wood , tan
@brakthehun2 жыл бұрын
@@andrealigesaddler8397 gotta get a good focus and go slower then.
@erniebolado36482 жыл бұрын
I don't quite understand all the functions for lightburn and I don't know how to open gcode files to burn. So I stick with lasergrbl and use easel for all the settings. Lasergrbl can see my gcodes that I generated.
@FingerBob3 жыл бұрын
Anyone else having issues with LaserGRBL not moving the Z-axis at all?
@brakthehun3 жыл бұрын
Most Laser control boards do not come with a Z-axis. What board are you using??
@FingerBob3 жыл бұрын
@@brakthehun Idk about the board, but it's got a z-axis. I'm using a CNC 3018
@alnath013 жыл бұрын
@@FingerBob You have to go to menu 'Grbl -> Settings -> Jog control' and activate the "show Z up/down " option.
@FingerBob3 жыл бұрын
@@alnath01 I'll try that. Thanks man!
@denispearse-si1oo2 ай бұрын
right click, adjust image. lightburn
@woodywood19512 жыл бұрын
I'm not sure you can compare them: Laser GRBL is just to convert a picture or anything else and engrave with a laser. You cannot draw with this software. From what I know LightBurn is not free...
@brakthehun2 жыл бұрын
Agreed. They can both stream to grbl controllers. They are both for lasers,, but they are very much used for different things.