So I bought a random brand of latex foam kit from a distributor, didn't know exactly how to use it and I just picked this random video on KZfaq to figure out how this material works.. and then 0:48 comes and.. HALLELUJAH! That's exactly what I bought..

With your style of mixer you do not need to “back Bowl” the dead spot is in the middle of your whisk. Put two ping pong balls in the whisk, during the time you would usually back bowl-slowly raise and lower the mixing whisk. If you can. Your foam looked a little over baked you could mostly likely cut the bake time by 20-30 minutes. If you want a lower rise foam that will flow a bit easier, cut your rise time by another minute, extend your speed 2 time by 3-4 minutes. (This is subject to your conditions) Pour the foam in the lowest part of the mold, fill as necessary and then rotate the mold. Gently place your positive into the mold and let it settle on its own. Place your wood block horizontally on the positive, make sure the block extends past the edges of the mold, this way when the mold is strapped you only get downward pressure for better edges. No stress on the sides of the mold. Slowly strap and tighten. You can also drill a 1/4” hold in the center of the eye and nose where the flashing is. It will relieve hydraulic pressure for thinner edges and provide venting for excess moisture

WHERE HAVE YOU BEEN MY WHOLE CAREER?!? Youre amazing! Please keep it up🤤

Du bist so eine inspirierende Person & ich finde es gut das du auch zeigst wenn man etwas schief geht

I like your attitude and willingness to learn from your own mistakes. Good job

Try mixing alum with potassium carbonate into a latex solution. First put 15 ml of latex into a cup ( I've been using a 50ml slightly flexible plastic cut for my experiments). Then dilute 2.5ml of potassium carbonate in 3ml of water and then quickly stir it into the latex. This will make the latex strongly alkali and so resistant to body acid and will stop the latex instantly setting when an acidic substance is added. The add 2.5ml of alum to 3ml of water and stir in. Add this solution to to the latex and quickly stir in. When it reacts, the results will be a bit sloppy at first and will need to be left overnight. I demould with an artists knife. Use what ever is appropriate. It can take several days to fully dry but a hair dryer might help. It produces a fairly ridged hard foam. Once you have produced a satisfying test sample, you can then go on to trying to make usable shapes and forms with it. It is great using pre-fabricated materials but what if you knew the science and could improvise new solutions.

I think you did a great job. I like to make Foam Latex to. Something that I always use is a injection gun, and I never do get any bubbles. So just an ideal if you ever feel like doing Foam Latex again

So where did you find an oven to use that isn't meant for cooking?

Thanks for sharing. I've wanted to give this a go ever since watching the show, Face Off.

is possible to make a full over the head foam latex mask ? rather then just face appliences ? thanx.

"Do not use your home oven." Any suggestions around this issue?

Harry Potter squad here lmao 😂 and future Sfx artist

You're adorable and I learned so much!

Do you think you could get by with a blender instead of a mixer? I am wanting to get into foam latex, and have been working with regular latex for years, but I really want to get into this, and this is the first video I found that has shown me anything. Thank you for that!

Hi! Is it necessary to use the oven? Thx!

Omg I felt so bad when the first one failed I cringed D: I hate when that happens

This girls has Beautiful hair color

Did you make the tutorial for gelatin prosthetics and I'm the one that can't find it ? And for the oven, why can't it be a regular home oven. You can't cook anymore after using it to bake the prosthetic or is it just because during the cooking it's very bad to breath near it ?

thanks for these videos!!!

I hope to make a King Kong for stop-motion.

I've failed so much that i'm sure to get it right eventually.

Random, but I'm wondering where ur from originally? U have a very beautiful accent! Thx4 the tutorial & details. I hope2 try this very soon!!

Hi! Does latex feel more like skin than silicone?

Where did you get the description? I highly doubt that latex must be baked at all...I´d rather assume it loses all of it´s structural strength with it

I've never have done it this way.

Yes!

My foam came out like cool whip upon mixing lol

Hi, do you happen to know if I can use plastidip on foam latex muscle suits?

Where can I get one of those bars to put into the face cast??

If I cant use my oven AGH darn what do I even use, poot

Question I have some scars on my skin that I want to stamp on to paper.. I can build layers with latex and peel off. But dont know how to tranfer on paper, any ideas?

How can i figure out mixing times for a 300gm batch?

Forbidden whipped cream ._.

Do you have to bake it?

What does "Backbowl the mixture" mean???

She sounds like Draculas daughter

Top englisch 🔝

negative of the fake face and the positive of your face. understood

you are so cute.....

Cheaper to buy. Don't use a home oven? That's me out