Lii Audio F18 & Billie Jo test run

Рет қаралды 8,769

Jean van Pareltje

2 жыл бұрын

mindfootage.nl/vintage-hifi/

Пікірлер: 5

@felix2b5 2 жыл бұрын

Thanks for the video , looks very interesting , what are the baffle measurements and how is the bass response ? I just ordered a pair of the f-6 6- 1/2 inch drivers from Lii audio , going to see how it sounds with the 18 inch Goldwood woofer in an open baffle 22 " by 47 " with a 100 hrz low pass on the Goldwood.

@PietjePuk181 2 жыл бұрын

In cm: 80×58×4. No filter here. Just an old school graphic equalizer, for old times sake. From 40Hz changes are noticable but around the 80-100Hz these cannot be missed. As you I am now also waiting. Hopefully for a nice contribution in sound by the F8. Good luck with your quest ;-)

@edmerkel2407 2 жыл бұрын

The gold trimwork gives it an elegant appearance. What kid of base did you construct for it? And it appears you have given it a slight rearward tilt as well. I'm considering building a pair around the F15s and adding a single W15 downstream if needed. But you make the 18s look very tempting! Nice work!

@PietjePuk181 2 жыл бұрын

Thanks. I used sturdy metal shelfcarriers like these: www.mijnijzerwaren.nl/ijzerwaren/2595-gb-plankdrager-met-schoor-300x500mm-verzinkt-8714318043964.html?gclid=CjwKCAjwq5-WBhB7EiwAl-HEkgixA3XLp_ugxR2YUPKycZb_SAXGml6bnPOFYcbOjFl_Xv5_o8dICRoCNZkQAvD_BwE Together with metal strips, normally used for smaller bookshelfs on a wall, to connect the two boards (in my later video's). These also contribute to more 'body'. You can either connect the carriers already in tilted position or use rubber dampers which give you some more freedom in positioning. Mine have rubber feet, stone floor. Very best of luck, it's fun to do!

@justlovelyaintit 5 ай бұрын

Grote jongens.