Thanks for this. Helix stomp is by far the most difficult/unintuitive to use piece of equipment I've ever experienced.

Thanks!! We were getting stuck on how to assign multiple effects to the footswitches, and you broke it down and made it simple.

I just got one, and literally, your video answered every question and head-scratch I was having!

Awesome beginner's tutorial. Thank you! Love the behind the scenes peek at 14:28 too. 🤗 Keep up these great videos!

This is the first *#@*&G HX Stomp video I could find to help me with the very content you covered so thank you!

Hey champ. I'm a newbie to this hx stomp XL and I've been searching for a while on an easy way to navigate the stomp. This was that video. Great job.

Thanks for sharing your knowledge and tweakery! I am a guitarist and bassist and have realized that more often than not I need a direct to P.A. option. Just ordered an HX stomp and am excited to dive in and will be watching your videos regularly.

This was a big help for me, Thanx!!!

At last! Thank you. I hate pulling a new bit of tech out of the box with all its own navigation systems and no idea how to get up and running without joining forums and seeking out incomplete tutorials by laymen that assume you are more intuitive than Einstein.

Thanks T,, and once again so informative. Cheers mate👍

Thanks. Concise and thorough.

Didn’t know you could assign two effects to the same footswitch. Thanks man!

Tyler YOU RULE man! This helped me figure out my HX big time

Thank you very much!! This helped tremendously!! 👏👏

Thanks for this video, very helpful I just got the stomp

Thank you very much! This video was amazingly helpful :)

Brilliant tutorial cheers mate

This was really helpful. Thank you.

As a gamer I am pro at pressing SAVE. Thanks for the help! Hopefully I have the right cables to connect my new stomp...

Zoom pretty much soured me digital multi-effects. I would never have even considered an HX Stomp without your vids, Tyler. But now I have one and use it constantly. Super versatile, both on stage and off. There's a learning curve for sure, but this vid gave me a solid start. Thank you for actually talking through the thing and not just making another video brochure.

Nice video Tyler. Line 6 really made the Helix so easy to get around and program, unlike Zoom IME. A bit of a learning curve as you say, but very fast to lean. I’m sure you know this but you can set the Volume knob to only adjust the headphone out, so you dont have to worry about it effecting the main out level. Helps keep things consistent.

Thanks for the explanation my friend, it was very helpful 👍

Great video dude!

Nice video. Thank you!

This video has a good disposition, it moves along at a reasonable pace. There do not seem to be any videos that explain the terminology, BUT that is in the PDF Manual from the line 6 website. As a new user just the term " Global Settings" raises a question? New users would be interested in a break down of just the TERMS of the HX Stomp, i believe!

great tutorial!

Excellent video

Excellent Tyler

Awesome! Thank you.

Really liked the bit about where Unity Gain is on the master volume knob. Would love to hear more about setting levels across different patches to try and match the levels so as not to blast anyone or disappear while switching patches and snapshots and such.. thanks!

Super helpful! Thank you!

theres always a comeback!

Excellent, thank you!!

thanks ... this is helpful

The video was really helpful thank you.

One more thing is that one thing I'd like to see is a demonstration of how to assign a looper to all presets as is recommended if I just want to choose a preset, record a jam track, save it then play to it. One video said to save the looper to FS1 and another to FS3 which I didn't understand what their argument for each was. Bottom line, other videos have confused me so I would appreciate your help. Thanks!

Trying to decide over Stomp and POD GO for bass. I prefer the simplicity of pod go but a lot people say the parrarel routing is essential. Any experience you could share?

helpful, thanks

If I were to be using the stomp predominantly through headphones what would be your general advice be in terms of creating presets and would any global settings need changing? In addition what headphone impedance would be best ? My guitar is a strat with a single size humbucker in the bridge

Thanks for the video . How many effects is someone limited to in the stomp? You mentioned more than one can be merged into a switch, is there a limit to that? Can the effects once merged still be edited or are they saved permanently as is unless reset? Or for example can amps be merged freely or is there a Limit? I see there is an 8 switch version but I’m confused to the benefit. I’m wondering if it’s easy to “max out” the effects and amp combinations? One last question, can you still get a realistic bass tone out of this or do you recommend a real amp to get a rounder fatter tone? When Iv heard audio in guitar/bass with these units, Frankly it all sounds really compressed and thin compared to a real setup . Iv not recorded instruments myself yet but I wonder if one could also just run a bass into some eq and compressor pedals and then run that into an interface directly? Without a helix? Can that be done? I’m sorry for all the questions but hopefully I can figure this out to quicken my learning curve . I actually plan on recording an album and sending it to a real mixer but when it comes to DI stuff and bass I’m a total newb. I just want the best sound but am curious about this pedal to some degree. I’d appreciate your help! Thanks

Thanks! I could not figure out how to assign a certain switch to a certain effect. Take care.

Thanks Tyler. I'm brand new to the stomp and play in an 80s band. Do you have any settings or suggestions for bass synth sounds? Cheers

How do you turn the tap/tuner button into a 3rd foot switch for effects?

hmmm... When I gently place my finger on the selector ( to assign a block to the foot switch), it's not responding. Any ideas why it might be doing that? I'm thinking about doing a factory reset

Could you demonstrate how you use this live? Like, with a bass in your hands, an amp, and what sounds/settings you would use on the HX? Thx

Recording on an iPad via usb/camera connector... line or instrument output? Does it make a difference ? Or would you recommend line/instr output via 1/4" and a separate interface?... How do you edit a preset then save it to another bank/number? (I guess i should read the manual huh 🤔)

I think a great video would be on how to download software and patches!

Hi, great vid! Can you download preset patches purchased online directly from an iPad or do you need a laptop?

Does the regular Stomp have the same “mode” function as the Stomp XL? This allows you to navigate presets more visually on the XL.

Quick question . Snap shot allows you to change parameters with in the same patch with no drop out between switches??

In my preset I patched eq chorus and dist...then I assigned to footswitch to ez for me to off n on patch when I don't want it..the question is I want to assign another one patch to footswitch how its gone be...bcz the last footswitch use for tuner is there any way ...

One thing that's a bit unclear, can I use the Tap/Tuner button like the other two switches?

Can you scroll through the bank using the pedals? Or do you have to use the page buttons?

Thanks dood.

Can the LED lights in the footswitches be turned off or custom colors?

Thanks for the video - it’s a great help! Do you have any plans to make a video to explain how to level match your presets on the HX Stomp? I struggle to find the best way to ensure presets are a consistent volume. I tend to have a massive volume difference between when the HX Stomp is bypassed completely, when I first open a blank preset and when I am using a custom-made or existing presets. I just wondered if you have come across this and how you solved it? Also ideally getting the perfect recording level when using it as an audio interface ~-18dBfs average. Thanks.

Hi,how to back Up tuner again I was mess something and gone

Hey thanks for the amazing tutorial video.. i just have 1 question, suppose im on the patch 1 and i've to go to the patch 5 directly while playing it live, how can i do that, can you please explain?

Would have liked to have seen: How the tuner works / How to navigate banks/presets up and down during a gig (ie: hands-free)

When you alter a preset and save it, the original preset is gone forever?

Can the tap tempo button be set up as effects on/off switch for a 3rd effect?

Make sure you're in "stomp" mode before trying the foot switch assignment.

How can I set a foot switch to bypass the entire pedal? First thing is to incorporate it into my pedalboard.

Is it possible to splice presets? IE using say an EJ clean, A Richie Blackmore Rhythm and the EJ lead? On the XH Stomp?

So what computer programer cause do we need to enter

can someone tell me how to assign an affect to foot switch 3 i don’t know how to disable the tap tuner...pls help!

Very helpful video!!! Does anyone know how to make access to the tuner instant rather than by holding it down? Want to use it as a kill switch plus just don't wanna lose time hahah

Hi I cant seem to attach an effect to a foot switch. It doesnt give me the option to assign block to FS. Any ideas ?

My bottons are all white and I am having issues setting different buttons to a different effect

Yass!!

Jesus A crist .how do they honestly expect the adverage person to use this unit. They would be loosing slot of sales

what for to buy this rubbish , take times that is all !