Linking FPP and Pixel Controllers together via Bridge Method

No video

Linking FPP and Pixel Controllers together via Bridge Method - LSNWN EP.5

Рет қаралды 1,267

How 2 Pixel

Күн бұрын

Пікірлер: 29

@rscott09tube Ай бұрын

Great video. I was having problems getting this working and your tip on IP forwarding fixed my problem. Thanks

@rfreitag Күн бұрын

Thanks for the video, it was super helpful in getting my setup working. Hopefully I can answer one of the questions you had in the video. When you were looking at the static routes in the router, the reason any ip address on the subnet was getting routed to the wired side of the RPI was the subnet mask. Using a subnet mask of 255.255.255.0 will treat all IPs in the last octet the same. You can lock down the subnet mask a bit more if you want using something like 255.255.255.255 and it should just create the route for the single IP

@1tepid 3 ай бұрын

Thanks for simplifying the process!

@ronnyvaughan 2 ай бұрын

Nick, you do a great job of explaining things. I have watched many other videos on setting up the Raspberry Pi and was about to give up ever making the thing work.

@How2Pixel 2 ай бұрын

I'm so glad the video was helpful! Thank you for watching!

@JayMikeLightsOfficial 4 ай бұрын

MAN I LOVE THIS SERIES

@How2Pixel 4 ай бұрын

Haha thanks!

@dmurdaugh2569 4 ай бұрын

Great video!!

@TopBlackWaterSniper 4 ай бұрын

Thanks Nick for this video. I was having some issues but now I see what I was doing wrong.

@How2Pixel 4 ай бұрын

Glad the video was useful!

@s.macmillan460 4 ай бұрын

Keep up the awesome videos Nick!!!

@How2Pixel 4 ай бұрын

Definitely will do!!

@jonbridges5888 4 ай бұрын

Great video Nick, I have set this up on my PI and home router, now to test.

@How2Pixel 4 ай бұрын

Awesome! Good luck with the test!

@nix8242 4 ай бұрын

Another nice and helpful video! Thanks!

@rxmas7234 4 ай бұрын

That cleared up several things. Thank you!

@How2Pixel 4 ай бұрын

No problem, glad the video was helpful!

@miguelalopez5685 13 күн бұрын

superior job explain all this

@How2Pixel 13 күн бұрын

No problem, glad it was useful!

@ronm6585 3 ай бұрын

Nice! Thank you.

@donwalker8050 4 ай бұрын

Thanks very helpful.

@miguelalopez5685 13 күн бұрын

Thanks!

@How2Pixel 13 күн бұрын

Thank you so much!!

@TarPancake 4 ай бұрын

You don't need to set up a static route on your router to get to the web interface of the controller, there is another option. xlights can do the forwarding for you. on the controllers tab in xlights click on the controller that you want to get to and set the field "FPP Proxy IP/Hostname" to the IP address of your raspberry pi. Now you can just click on the connect button at the bottom

@How2Pixel 4 ай бұрын

Thank you for the tip! Now I'm assuming this will only work for that computer right? Usually when I'm outside and testing or recording my show, I need to access my devices from my phone. That's why I used to set a static route when I used this method.

@TarPancake 3 ай бұрын

@@How2Pixel it should work for any device. i use it to connect to my falcon controller from my phone. the url format is like this... 192.168.0.184/proxy/192.168.1.253/

@How2Pixel 3 ай бұрын

Ohh ok, I'll have to look into that some more. I can't believe I didn't know that but hey, you're always learning 😂. Thank you for letting me know about this!!

@ddonald5723 3 ай бұрын

From the research I've done, ATT routers do not accept static routing. Anyone have a comment regarding this?

@How2Pixel 2 ай бұрын

Are you talking about AT&T routers? That's very strange, I've never heard of anyone having this problem with specifically those routers. I don't have much experience with AT&T routers but from what I've heard and know about them, they should work just like any other routers.