Bro casually out here building UFO technology

Thank you. No talking and no music. Love it.

This reminds me of the inner workings of a triangular craft called the TR3B. The engine is supposed to have an inner chamber with spinning mercury that creates an electromagnetic field. Mercury has always fascinated me.

Reminds me of Michael Faraday's first motor which also used mercury in a bowl the setup was a bit different but was basically the same, good demo.

I like how he dramatically connects the power.

Phase 1 of 92 creating a 'Liquid' Terminator

This gives me chills, connecting this experiment to Vimana's the flying saucers specified in ancient mythology powered by Mercury, having anti gravitational properties.

1. Slow motion please. 2. It would be interesting to study the transitions between laminar and turbulent flow in mercury under various conditions.

Does this process actually change the taste of the mercury?

this is pretty neat, and also i like the fact that a slight amalgam is forming in the mercury as it spins, perhaps from the metal dish itself or the apparatus at the center.

Here's an experiment I wish someone would try: Make a doughnut shaped copper coil with another doughnut shaped tube in the center of the coil filled with liquid mercury. Connect a wire from the coil to the tube so it makes contact with the mercury. Then use a machine to try different frequencies to see if you can pull power out of thin air from the "Taurus field." Also you might have to have 2 sets of mercury filled tubes so they can run in opposite directions which may be needed.

i imagine it's to avoid dangerous splashes but i wish he would have reversed the polarity almost instantly to see how it would react. slow and steady or chaotic and fast? we will never know

This is what the ancients used to make flying ships ... at the core of the ship they had a sphere of mercury in a rotation.

A: Where did you get that much mercury, and B: what is you amperage? Magnetohydrodynamics is so cool!

Very nice demonstration! We did a very similar experiment in 1983 published (J. Fluid Mech. (1983), vol. 126, pp. 413-430). The flow starts rotating at a critical current magnitude (about 100 Amperes) due to the terrestrial magnetic field, no magnets are needed. The arrangement was highly symmetrical relative to the central axis. The effect is very similar to the bath tube vortex.

I'm interested in seeing the experiment with a clear dome cover. The lines in the mercury radiating from the center after you stop the experiment are interesting. As mentioned below, a slow-motion camera.

I don't know what I expected to happen. But I got exactly what the title said. That sure is a Mercury vortex in a magnetic field.

This is how my Laboratory attendant does all the experiments and then ask questions without telling a word!

I love the geometric form it takes when you pull it away

Looks super cool.

This man is working on a reverse engineered concept that will eliminate conventional propulsion

size 9 hands

Теперь понятно почему древние космические корабли Виманы в Индии использовали ртуть. Отличный эксперимент!

Весьма полезная штука, с массой практических применений

Bravo. Very clear and elegant set up.

"The speed of rotation depends on the voltage." Pretty close but not quite right. A better answer might say...... the amps flow causes a force on the mercury that causes the mercury to accelerate in the magnetic field. As the mercury is centrifugally pushed to the outside, the magnetic fields weaken causing less thrust. The final average velocity is a balance of the lenze forces on different parts of the mercury and the energy dissipated in the mercury because of viscosity, turbulence and ohmic heating. The amps flow depend in part on the voltage and ohmic resistance, but also the surface area in contact with the mercury, as well as the geometry of the contact area and the cross section of mercury that the current travels through, in addition to the temperature of the mercury.

Awesome videos ! 👍

you almost got the whole UFO. just a few more pieces

Mercury :- Damn that's why I spin faster around the Sun

Thank you Roobert. Your work is very neat and easy to look at.

The Vaimanika Shastra describes the construction of mercury vortex engine. We dont realise it but this is probably an ancient secret we can't decode.

Thanks for allowing us to enter this mysterious world you are exploring.

I think a high-speed camera would show interesting shots

If you place a concave ring at the top of where the mercury levels while spinning, inside the bowl it can never fly away and you won't have to unhook while still being able to view the mercury spinning under the newly made anti spill lip. You can make by cutting appropriate size hallow ring and connecting in the bowl. What do you think?

Fascinating!

That's cool!!!! I never knew the behavior of mercury under a strong electromagnetic field.

Would be interesting to find out the voltage rage needed to keep it stable at top speed... Thanks for this great video on a little understood metal

A very nice demonstration of the Lorentz Force. Motion, flux, and current are all at right angles to each other, mutually perpendicular. Fleming's hand rules in action. Roobert33, I really like the way your displays are built. They are easy to see and understand, clean and organized. By the way, rotation of the mercury by external means, will also produce a voltage at the terminals. This would be a nice addition to your demonstration. The voltage thus produced is proportional to the velocity of the mercury. This method is used for measuring the speed of marine vessels through salt water with no moving parts, other than the saltwater moving past the sensor.

I glade you had the glove size so I can fully recreate this experiment.

Muchas gracias!!!

Wow! That sure is amazing! I am fascinated by the very concept of any kind of vortex, so this is an amazing video!

reverse it.. makae the magnet rotates in a pool of mercury.. it will produce current.

Dudes going’s to inadvertently open a wormhole to another galaxy

Idea. Trap the mercury where none can fly out of the top. Then, supply so much current that it levitates off the table. No idea how much that would take. But, I bet you'll have fun trying, or I will. I've heard the magic number range is 50k+ RPM.

Would love to see this experiment in a different shaped container, where the mercury would not slosh around. Thanks for taking the time to upload your experiments.

Nicely done.

This is so cool!!

most interesting. Does the moving mercury throw off any kind of RF or other radiation?

i notice, there is a layer on top the mercury after flush. is that an oxidized layer of mercury?

Could you use a function generator to try to generate a stable vortex? That would be a cool demonstration.

Nice experiment

Great job

eselente eres un genio saludos desde gran canarias las palmas maspalomas

could you try magnetic viewing film on top of it as it is running.

Ok this is really cool I'm a 50 year old and I. Actually amazed thank you this is an experiment I didn't think of when I was a child.

Awesome! Would it be possible to do this in a glass container on top of the magnet?

You are on the right track... try this next: 1) A toroidal vacuum chamber 2) add nanoparticles of Iron, Barium, Cobalt to the mercury. 3) use electromagnets that pulse in sequence around the toroid chamber. 5) Build a simple circuit that will allow to pulse the magnets on sequence & allow to control the frequency of the pulses. 6) Set the toroid chamber on top of a scale . There will be no friction because once the mixture is turning it will be centered inside the toroid walls & will not touch the sides. The mixture will warm up by friction of the coloidal ferro-mercurial suspension. In time this will produce a plasma. Once the mixture is reaching near-relativistic speeds, the device will produce interference with gravitation waves, for those who know, "a standing wave" that will keep gravity waves to reach the toroid. At the same time, the setup,will produce It's own gravity!

Use an in closed system with the magnet on the top instead of the bottom, plus use something not mounted down but on a tether.

Really fun and amazing comments on this experiment ! 👍👍 😁

To add to your test,I ask you to put a digital scale under the mercury,and when you spin it in a vortex does it get lighter,spin faster,add electricity stronger spin,it will rise off the table if you can add enough,I've seen this done.....but you won't believe it unless you put a scale under your experiment....it's mind blowing,and anti-gravity at the same time...you can see it rising already,so trust me and try it

There you go! Now add information (not just noise) to the electrical input. See what we get.

I have a couple questions what is at the bottom under the ⭕️ shaped magnet here 0:12 is it a circle shaped steel plate? Also here 1:05 what does he use to seal the inside of the bowl

looks like the top slows down immediately while underneath its still going for a bit after the power is disconnected. pretty cool

Lol, never saw better 160A switch.

Awesome! Now add more power. But first put the mercury in a hollow toroid shaped former so it stays contained and in contact with the electrodes at all times. At some point, things should get real interesting if your containment vessel (toroid) is strong enough. Chill the apparatus to about -39 C while maintaining vacuum in the containment vessel to reach the superfluid triple point of mercury and try again. Subscribed to see how far you take this. EDITED: removed my impossible to exist -14.7 PSI error.

You need to keep going... you were amazingly close to a breakthrough...😊😊😊. The ttransfer of the weight is key.

Seeing this in super slow would be awesome :)

It would be interesting to find out the maximum rpm you can get. A hollow donut shaped glass container with a small red plastic ball inside as an indicator would be the way to go.

Thank you for more fun with mercury. A few cautions, use nitrile gloves, face shield, and work under a fume hood. Considerable vapor and microscopic splash is generated by the experiment. If you accidentally suck up the splash into your household vacuum, you will be venting vapor into your work space every time you use the vacuum and, because the mercury will get stuck in all the nooks and crannies, and also sorb into the plastics parts, it will be virtually impossible to decontaminate the machine. You might get the body clean, but throw the PVC plastic hose away. Not sure what is going on here other than the mercury is acting like a rotor in the current field of the stator. If you redid the experiment with the mercury isolated from the current, would anything would happen? The use of an aluminum bowl is an interesting choice. You can see that the current induces amalgamation between the mercury and the aluminum, and the mercury becomes coated with a dull coating of the amalgam. It would be better to use a stainless steel bowl, as it would resist amalgamation, but, of course, stainless is a rather poor conductor, so maybe the rotor effect would not work or work as well. There are many videos on KZfaq where people make spinning electrical motors out of all sorts of things, including ball bearings. There is no magnetic magic about it. The relative efficiency of the input energy to usable output power is quite poor, especially as compared to our old friends, the internal combustion engine, steam turbine engine, and conventional electric motor. I am not sure, but I am guessing that it has no real application for motive power. Maybe a highly specialized application, such as wanting to rotate a huge pool of mercury very slowly so as to create a perfect parabolic mirror for astronomy. You should repeat with a variable voltage and frequency power supply. Might be fun to make a variable frequency drive liquid mercury motor.

That is very cool.

What if you put it in a closed Torus with the Mercury inside it and ramp the voltage through the roof? Would it generate a Torsion field or some other field?

This is how to create antigravity. The Mercury has to be spun alot faster than that but your on the right track.

Could you please make another video but this time put the whole setup on a scale? See if we get any indication of loss of mass

Great work bro

On one occasion almost 50 years ago I visited a country house owned by a friend of my father who was called the ingenious Hidalgo and they had a 10kws generator that worked with free energy, I remember that he was explaining its operation to us, it was a game of steering wheels and Oversized pulleys mounted on an iron structure outside his house, driven by a 2hp self-powered motor powered by the generator, had a flywheel of about 300 kgs up horizontally sitting on a shaft with well lubricated bearings, the we said that the secret was an internal duct that contains mercury this had a crown in the lower part coupled to a tractor starter in a vertical position for starting it worked with batteries and once started it was uncoupled in the upper part it had 2 pulley one was coupled to the generator that was also in an upright position screwed into a spring-loaded base and a lever that served as a cluch to disengage while starting on the pulley The upper side rotated a long belt that turned 180 degrees on some pulleys that were simultaneously coupled to 2 large flywheels of 150kgs each, in a vertical position that rotated in opposite directions and finally coupled to a small pulley of the small 2 hp motor also put in a vertical position, he told us that the motors in a vertical position had greater efficiency and also he had improved the bearing system incorporating a planetary roll in the lower part so that the shafts will rest, something he also explained to us about a solenoid with a magnet that also contained the parallel wheels that rotated in opposite directions. The Mr was a great empirical electromechanical and with great knowledge of physics, because of my young age I did not understand many concepts of what he was explaining to us, shortly after our family moved from town but I kept that in mind and many years later I visited the place with a camera wanting to get information and to surprise no one lived there anymore and the house had features of having been burned and we never heard from that man again I asked some people who know him and they replied that he had received an offer working abroad but did not know if it was in the USA or Puerto Rico.

If you lowered the voltage would that smooth out the flow? Maybe increase it variably.

It makes sense, why the Mayans had a lot of Mercury underground in secret Chambers under the pyramid. Interestellar portals

I’m trying to imagine mercury in zero gravity, if you used a large hollow tube and fill it 1/3 or half full of mercury and controlled it threw magnet alternating negative or positive pulling the liquid up or down and one facing opposite direction left to right would this have any affect in a large quantity.

Super film Andy 🌟🌟🌟🌟🌟🌟🌟

Spectacular! The momentum of all that mercury must be very high.

Thumbs up if you got distracted with the drop of mercury clinging to the side, waiting for it to join the rest.

Is the mercury spinning counter clockwise on its own, or does the electric power cause the center attachment to spin?

About time you tube has educational videos. science is the best.

Think 3 phase would be smoother?

Mercury Vortex Engine=Vimana

me to dad: i'm tired of an ordinary omelette Dad: 2:27

Is this possible with Galistan alloy ? And what about adding frequency? Does it change the disruption of the liquid?

All that trouble when all they needed to do is stir it with a spoon to get the same effect.

Have you checked the temperature of the mercury,before,during and after the spinning? Use laser thermometer.

Nice switch ;)

Se você girar o mercúrio com uma colher, você gera energia na saída para aceder uma lâmpada por exemplo??

When i was watching this video I started to levitate

Mi stai facendo tornare la voglia di fare esperimenti col mercurio ... e non è bene perche gia una volta l'avevo cercato senza trovarlo in vendita ... frustrante. Bellissimo esperimento, e inaspettata la forza del vortice.

Ok so question, does the electric field of the mercury field "spin" as well or is it static. Wondering if you put an enormous amount of current and keep the mercury contained maybe even pressurized until it becomes vapor and eventually plasma what numbers one get...cool, i mean cooling would be essential.

If you, instead, put in a few small metal balls, would they spin in kind? Sorry if this question or answer is obvious to some....im just fascinated with mercury and want to see if this metal differs from other metal in this experiment (other than one being liquid metal) Thanks.

hi , I love this. i have a huge suggestion, could you please re run this experiment with a variable switch instead of ur human analogue one, the reason for this as it would give u significant control over the tuning of the vortex and thus produce a much better one as the reason toward the end the mercury splutters is because u have tried to establish the vortex without the necessary centrifugal build up of energy to support it, if you've ever used a mag stirrer then you will know what i mean. then please increase dose of mercury safe increments and video results. very good experiment :)

Put 2 of these spinning opposite directions (1 over the other) inside a charged electric lifter in vacuum. Would like to see if the lifter tries to center itself between both rotating fields.

I have a question please... Does the spinning Mercury act like the rubber band on a Van Degraff Generator where it collects positive ions and shoots them upwards or downwards?

Your method of “switching” the power on is utterly terrifying.

Try this with neodymium magnets. Would the vortex be drastically higher or the same? In an elongated cylinder, a stretched vortex = stronger pull? Or a LHC-concept circular tube (which would make more sense on a saucer-shaped object) There's many ways I can think of to manipulate it to a maximum pull, perhaps. However, I do think there has to be multiple polarizing stand-alone vortexes on a said object to have it levitate. I work with drones, if you have 4 rotors, 2 must be upward thrust, the other 2 must be downward thrust (alternating) for stabilization. I'd assume having multiple vortexes of reversing currents on the mercury would follow the same concept? Nice video, diffley got me curious.