Restoration 1963 Triumph Tiger Cub Full ENGINE Rebuild # 2

Рет қаралды 265,643

Жыл бұрын

In this Video, We're Restoring a 200cc 4 Stroke Engine of British Motorcycle "Triumph Tiger Cub". Some Months Ago, I found this Amazing British Beauty of 1963... "A Triumph Tiger Cub". As We Found it, I immediately purchased this from an Old School Uncle and took it to my Garage. And Now, This is the Time for what I was waiting, We started an Amazing Restoration of this Enchanting Beauty. Its a 4 Stroke 200cc Motorcycle, I can't Imagine ! So, I Hope you also Love this beauty.
First, Watch the Previous Part of Triumph Restoration:
1963 Triumph Tiger Cub Restoration # 1
• 1963 Triumph Tiger Cub...
I also want to tell you that I'm Really very thankful for every single supporter of us. Also give me feedbacks, after watching the video. In the End, I wanna thanks you again for watching this video.
Also Watch our Other Videos:
Full Restoration 60 years Old 1962 Vespa Scooter
• Full Restoration 60 ye...
Full Restoration 40 Years Old ruined Classic Motorcycle
• Full Restoration 40 Ye...
Making an Electric Bike of Future from Scrap motorcycle
• Full Restoration - Scr...
Turning a Vintage Motorcycle into an Incredible Cafe Racer | Full Restoration
• Turning a Junk Motorcy...
I did my Best in this Video. So, If U like this Video, Please Give a Thumbs Up and Give us Suggestions and FeedBacks in the Comment Box.
Do Subscribe to Encourage Us :
kzfaq.info...

Пікірлер: 90

@fredfarnackle5455 Жыл бұрын

I can't believe how well those crankcase halves looked after polishing them!

@mrsmith4662 Жыл бұрын

A truly incredible job. What a job and all those Philips headed bolts which can so easily foul up. This is special.

@liamgibson7471 Жыл бұрын

I just watched both vids in awe of the skills of the restorer, my only regret is that I learned navigation and not engineering in the navy

@mozdickson 5 ай бұрын

Lunmad would've given a Thumbs Up!

@stuarthall2523 Жыл бұрын

Amazing

@user-ep5ik5bo8s Жыл бұрын

I rarely write reviews. But this is a master with a capital letter. Accuracy, pedantry and great skill. Good luck good man.

@howiekeegan8804 Жыл бұрын

Great job! Can't wait to hear the sound of that engine! I had 2 cubs in my youth and loved them (despite the constant breakdowns and big ends going!)

@gordonhutchison9647 Жыл бұрын

Lovely little bikes and go well had a few in my time one was a 200 really nippy and easy to work on.

@broncpal4244 Жыл бұрын

Loved this vid....and the pace was just right too. Can't wait to see and hear the finished product. The first motorcycle I ever ride in my life, when in my early teens, .... was a Cub.

@sahimsaifi8525 Жыл бұрын

Nice work

@arungaddam64 Жыл бұрын

Eagerly waiting for next part.

@tonybowers9490 Жыл бұрын

Wow!

@trevejenkyn9888 Жыл бұрын

Brilliant work

@josegustavopena3844 Жыл бұрын

Cool refurbish job! Congrats!

@user-fj6xq9wo5g Жыл бұрын

Bhai videos amezing and kadakkkk 💯❤️✌️

@paulfellows2094 Жыл бұрын

awesome job ive allways loved them what a beauty canot wait to hear it roar i had one back in the day ive been waitng for someone to do one and you do it great british classic well done

@ZygmuntKiliszewski Жыл бұрын

Good job, congratulations, precise work 👌.

@shaftdrive7567 Жыл бұрын

Mesmerising. Thank you.

@muhammadryadh8702 Жыл бұрын

Can't wait part #3 full restoration of it ✨

@billschipper1718 Жыл бұрын

Looks great 👍. L can tell can you're skills by the way you make it look so easy. t Great job so far

@Ranmonduilding Жыл бұрын

Very nice

@stonerdoom3481 Жыл бұрын

Looking good.

@k6IShero_ Жыл бұрын

Waiting part 3

@gregorycapart4258 Жыл бұрын

Trop bien

@teej710 Күн бұрын

Brilliant restore video. However, at 12:37 you can see that the primary crankcase seal E3379, is the wrong way round. The seal spring should be facing the crank, to help prevent a chain case oil leak from the clutch side layshaft.

@Ungal_nanban_Harish Жыл бұрын

♥️for ur hardwork always bro🤝

@arungaddam64 Жыл бұрын

Wonderful,hatsoff.

@nayeemshouvon Жыл бұрын

great job!

@jaisons4376 Жыл бұрын

Welcome to kerala

@RestorationAustralia Жыл бұрын

Nice, well done.😊

@luizalbertorodrigues4560 Жыл бұрын

Great jop you the best

@re-fix9678 Жыл бұрын

Good restore❤

@notwocdivad Жыл бұрын

Cannot understand why you polished the outer cases but not the points cover or crankcase plugs, or the head casting for that matter. I also didn't see any lubricant applied to the bearing surfaces whilst rebuilding the engine? However there was a lot missed out so may have missed those bits? All in all a nice job, now we need to see and hear it running!!

@Donizetintruder Жыл бұрын

Beautiful job.🇧🇷🇧🇷🇧🇷

@asadsiddiqui1999 Жыл бұрын

Treat to eyes ❤️

@mandapallianilkumar341 Жыл бұрын

Super 👌

@andywawa7227 Жыл бұрын

great job buddy

@user-coolbox Жыл бұрын

有趣!!而且專業

@carrestore Жыл бұрын

great job👍👍

@colindelamare3180 Жыл бұрын

Pity its left half finished would have loved to see finished article

@uRRi2010 Жыл бұрын

Очень интересно!👍

@larsjungnell1969 Жыл бұрын

Mycket bra!!! 👍👍👍Mvh Lasse!

@restorationofdirty Жыл бұрын

Love this😘😘😘😘😘❤️❤️❤️❤️❤️❤️❤️❤️❤️

@wanderlustfamily2022 Жыл бұрын

wow!

@hefy2jefy Жыл бұрын

This motor's weakness was the big-end bearing, it was a plain bearing instead of a roller, I ran three of them. I think there was a roller conversion...

@John-nw8uj Жыл бұрын

By Alpha. John

@thomascatford2627 Жыл бұрын

Yes there was alpha cost £7.10s , i had a cub in 1966 drove it as fast as it would go all the time ,after two big end failures fitted the roller type .

@davidwilliams116 Жыл бұрын

I rebuilt my engine with needle follor bearings, big -end ,mains -bearings ,little end ,high compression piston ,hi lift sports cams .

@user-ud2ze9is5h 8 ай бұрын

1 base 2 base 3 heat exaust welcome 4,exit 5,chamber 6,meter 7, panel seat 8 bye sheet sticker

@mrofnocnon Жыл бұрын

I loved my Tiger Cub! Way back in 1968. I don't recall any part of the engine was painted except the barrel. Did you replace all worn bearings and seals and have a rebore with the new piston ? I know parts availability is an issue these days and you can do only the best you can. You certainly did a thorough of cleaning. Very nice.

@dattakyanam586 Жыл бұрын

KO Jo no

@chrisscott7522 Жыл бұрын

I enjoyed the first part of the restoration video but unfortunately got nothing out of this part because the time lapse was too quick

@greasy7494 Жыл бұрын

Question, Do you have to soak the clutch plates in oil before you put it together? The motor looks great by the way!

@irzanhaziq0674 Жыл бұрын

Part 3 please

@teej008 Жыл бұрын

It sounds like your sandblaster could be disguised Decepticon.

@GoldenBoy197912345 Жыл бұрын

Buen video de restauración, solo que la técnica de pintura no es del todo convencional y no me refiero al material. Por otro lado, es muy importante resaltar que los disipadores de calor, tanto del cilindro como de la cabeza no deben ser pintadas, para que su función de refrigerar tenga el mejor desempeño. Saludos.

@paulthomas5258 Жыл бұрын

Nice job motor looks fantastic did you not use any sealer with the gaskets?

@lesliefox9800 Жыл бұрын

i had a valve snap on mine ,and it went straight into the head

@wanmuhammadfakhrullahwan8078 Жыл бұрын

👍👍,,

@GWAYGWAY1 Жыл бұрын

Telling fault was that the engine sprocket needed a strip down to do it. A way they were telling you it would last that long before clapping out. As for a triumph frame characteristic of two long bent tubes going to the headstock was another way of saying it will not handle at all well, it needs the tank to give the frame ‘stiffness’ but it didn’t.

@user-ud2ze9is5h 8 ай бұрын

3bolts driled welded earthed

@cedricletourneur5980 Жыл бұрын

Bonjour, vernissez-vous les carters aluminium après les avoir polis-miroir?

@carlnewman24 Жыл бұрын

Well,...........its shiny.............

@firpotrefi7614 Жыл бұрын

deberían mostrar como queda

@michaelmathews295 Жыл бұрын

The rod bearing on these is a big weak point. It needed to be disassembled and checked.

@motsigman Жыл бұрын

Had a few of these in the 70's, not sure how triumph got away with selling them to be honest, no wonder Honda crushed them..

@RK88_Channel Жыл бұрын

test ride please .,.,

@lonerbikes Жыл бұрын

What light do you use ? Can you send me link or name

@johnharrison5405 Жыл бұрын

correct me if I am wrong, but I didn't see any piston rings go in there!

@newsomeassoc Жыл бұрын

Can you restore a 1971 Honda cb350 for me???

@soccerfreestyle1027 Жыл бұрын

Are you from Pakistan

@igniscarn19 Жыл бұрын

Where is third part?

@johncorlett3699 Жыл бұрын

shame the gearbox sprocket was put back worn, my qub was all rollers and ball race, had a mountain of part many years ago

@user-ud2ze9is5h 8 ай бұрын

its a 9.wire chain prisom of 3.

@skkobir8945 Жыл бұрын

bro can u restore my yamaha scooty?

@zxnme.xm4 Жыл бұрын

Part3?

@ALONEGAMING-bq3fq Жыл бұрын

@bayya sunny yadav

@coffebee7651 Жыл бұрын

Where is the next video.. will it run...? Pls up load the next video about the motorcycle..

@LiveWithCreativity Жыл бұрын

We're working on the project. In a Couple of Days, we'll upload the next part. Thanks

@coffebee7651 Жыл бұрын

Thankyou 😊😊

@frank-il3zm Жыл бұрын

solutions names mention otherwise its not usefull

@AkhileshVeldanda Жыл бұрын

Are you a chemical engineer or what?

@frankmarkovcijr5459 Жыл бұрын

That is more like a corpse of a motorcycle. I gave you guys a lot of credit for restoring something that looks as bad as that. But let's face it you're not restoring as much as remanufacturing it. When they are in that far gone a shape that is.