Load Calculation for G+2 Building | Column load calculation | Influence area method

Load Calculation for G+2 Building | Column load calculation | Influence area method | Part -1

Рет қаралды 86,937

4 жыл бұрын

Hello friends!!
This video explains about column load calculation for G+2 building by using influence area method with step by step procedure.Detailed calculation is shown and finally the manual
results are compared with Staad.pro analysis results.
Please refer to the other part of this series
Part-1
www.youtube.com/watch?v=q8-pu...
Part - 2
www.youtube.com/watch?v=XSptm...
Part - 3
www.youtube.com/watch?v=7cpyZ...
Part - 4
www.youtube.com/watch?v=0RXEc...
Part-5
• Load calculation for G...

Пікірлер: 94

@CivilEngineeringMastery Жыл бұрын

Dear All, Kindly check out the below link for Structural Analysis and Design of RCC building using Staad.Pro software. In this course, all the basic concepts, and Lateral load Analysis(Response spectrum and wind load analysis) of a building as per IS-456, IS-875, IS-1893-2016, and detailing as per IS-13920 have been explained. www.udemy.com/course/staadpro-v8i-structural-analysis-design-of-a-rcc-building/?referralCode=C1CBC2B104EF72579338

@helenatijing8798 3 жыл бұрын

We are using this method in my past jobs,this is fast and effective.Nowadays many softwares are born but yet,we are doubting the results beacause of unseen errors in analsyis,by doing this you can check your design and analysis and sleep well.😂😂😂

@zarghamhaider735 2 жыл бұрын

Error error in video

@designsource4481 4 жыл бұрын

This is the best tutorial in my life.Very clear concept method.Thanks for make this kind of tutorial.

@CivilEngineeringMastery 4 жыл бұрын

Glad it was helpful!

@saisekhar5454 3 жыл бұрын

Very helpful 👍 video

@civilengineeringknowledge7250 4 жыл бұрын

Very helpful for me

@sayandas8914 4 жыл бұрын

Mam your tutorials are too good💚💛mam i have one request to you can you please give us a tutorial about how to design a building manually by comparing the same model with staad pro.please mam.It will be very much useful for students and working professionals both🙏🙏

@user-pl1ki7bq6o 4 жыл бұрын

Thank you mom you are the best

@greenenvironment7098 4 жыл бұрын

Nice one..

@kamalahamed8586 2 ай бұрын

super

@ershashankkumar3991 4 жыл бұрын

Very helpful all vedios. Please provide more videos on manual practice with staad design. Thank you

@CivilEngineeringMastery 4 жыл бұрын

Sure I will

@abhisheksen325 4 жыл бұрын

Please share the load calculation of an elevator and also share the load calculation of steel building

@malinisankar2400 3 жыл бұрын

Hai mam. Thank you so much for your videos. It s explained very detailed. One kind request can u provide autocad file so tat i can practise better.. pls. I have seen few other people also requested the same. Pls do this favor mam

@nageshwaraonandigama6194 4 жыл бұрын

Super madam

@narendrarbhagyaa1012 4 жыл бұрын

Thank you madam this was very helpful to me

@CivilEngineeringMastery 4 жыл бұрын

Glad it was helpful!

@naveenkumarmakamala1059 4 жыл бұрын

Please upload the autocad design also

@MohammedImran-wz4kv 4 жыл бұрын

good explanation tq.

@MohammedImran-wz4kv 4 жыл бұрын

very helpful for me.

@faizanshaikh6036 Жыл бұрын

Definitely these all tutorials are very helpful for students.keep it up mam👍👍.and make a more video on whole design of building from start to end with different geometry.Thank u

@CivilEngineeringMastery Жыл бұрын

Sure 😊

@CivilEngineeringMastery Жыл бұрын

I have created a course, structural design of buildings using Etabs software which includes structural analysis and design of a five-sorey RCC building(Real project) and is now available on udemy. Kindly use the below link to avail the full course. www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?referralCode=14883FDBBD95A1ADAC02

@rahulsanapally 5 ай бұрын

AWESOME MAM U R SIMPLY AMAZING U GOT GREAT KNOWLEDGE IN CIVIL ENGINEERING MAM HOW CAN I GET THOSE AUTOCAD DRAWINGS TO PRACTISE🙏🙏🙏

@CivilEngineeringMastery 5 ай бұрын

Please join the channel membership to get the drawings.

@rahmanrahmani2896 4 жыл бұрын

Could you please explain how you have decided the contributory area to each column in your AutoCAD drawing. The load calculation is straight forward (load from slab & wall to beam to column then foundation). Thank you!

@CivilEngineeringMastery 4 жыл бұрын

Yes correct,but this is influence area method in which the slab load can be transferred to column by using the tributory area. Contributory area for each column can be decided by using center line of the columns.

@jaydeepganguly6144 Жыл бұрын

Please make video on manual calculation of Mux and Muy for g+2 building frame

@mdriajulislam8828 4 жыл бұрын

maam im in a big problem my load came 93000 kg in 12 m2 now i cannot convert them in cm how much would be for my column concrete load in per cm2????

@civilengineeringknowledge7250 4 жыл бұрын

Please give a video on all about design of a two story building step by step i.e. 1st floor design and ground floor design, slab design, beam design, column and footing , and all loads calculation that load comes on that section.

@CivilEngineeringMastery 4 жыл бұрын

ok.

@user-pl1ki7bq6o 4 жыл бұрын

Waiting that mom thank you very much

@masterbitter7688 4 жыл бұрын

@@CivilEngineeringMastery please

@mdsarfarazali4151 4 жыл бұрын

Please send full details manual designing

@mayappamechhennavar6418 3 жыл бұрын

Mam How To Calculate the ultimate XI load of the building to calculate the size of the column?

@lokeshacharyab.g8006 11 ай бұрын

Madam how to design single column using load and moments in staadpro software? Which are the two moments tob considerede to mmoments or bottom moments

@asifkhatri3769 2 жыл бұрын

How to check upper storey column load in staad pro???

@ersedhuramprasanth7161 4 жыл бұрын

How you calculated influence area for particular columns as you mentioned in plan?.plz make video of ,how to assign size of footing, column,beam and distance between column.

@CivilEngineeringMastery 4 жыл бұрын

Influence area is calculated by using the center lines(area around the column) between columns.

@ersedhuramprasanth7161 4 жыл бұрын

@@CivilEngineeringMastery if you Already uploaded video plz mention below

@CivilEngineeringMastery 4 жыл бұрын

will upload one video.thanks.

@CivilEngineeringMastery 4 жыл бұрын

Refer the below link for influence area calculation kzfaq.info/get/bejne/ptqRdpWZycqZiY0.html

@Salman15691 3 жыл бұрын

Best Video. Ma'am I've one question that why are you not factored load in calculation..

@CivilEngineeringMastery 3 жыл бұрын

I have factored at the last please watch all parts of this video series. kzfaq.info/get/bejne/jrmgp9CUltmVdKM.html kzfaq.info/get/bejne/bcmgrL1puJyaZnk.html kzfaq.info/get/bejne/ZriIeMammru2iaM.html kzfaq.info/get/bejne/rNCDeJSImNrLpnk.html

@nageshwaraonandigama6194 4 жыл бұрын

We expected more valuable vedios from you

@AAAFriends 4 жыл бұрын

Please upload videos architecture plan same as structure plan with structure analysis in staad pro.

@CivilEngineeringMastery 4 жыл бұрын

Please refer the below links for staad.pro analysis 1.Modelling in Staad.pro with plate elements kzfaq.info/get/bejne/kLx_nqqjttnOeJ8.html 2.Assigning loads in Staad.pro kzfaq.info/get/bejne/rtuFoZdn0d3HpXU.html 3.Results from staad.pro analysis kzfaq.info/get/bejne/pZyYdJaWvZ-RoYk.html

@mayurchoudhari6578 3 жыл бұрын

How to calculate the thickness of slab

@syed7451_civil 3 жыл бұрын

G+2 residential building ke Liye ground floor beam ke liye kitna mm ka rod use kare. Beam size 250× 400 mm For idea please reply

@zarghamhaider735 2 жыл бұрын

Please ans 25kn/m3 or 25kn/m2 which one is correct???

@gowthamiv4841 4 жыл бұрын

Here you have calculated one column load but simply multiplied.. Actually number of columns per and floor and number of stories then total load arrive..

@CivilEngineeringMastery 4 жыл бұрын

Here we are calculating loads on individual column and some times loads coming on each floor may differ. So we have to calculate loads coming on each column and each floor. In this calculation we have calculated loads coming on each floor for individual column. only the self weight is multiplied by number of floors.

@sumankumarparida8610 4 жыл бұрын

Can i get the the autocad file for better learning..

@zarghamhaider735 2 жыл бұрын

Beam Lxbxd =.230x.375x25=Xkn/ans in meters . What is beam length

@CivilEngineeringMastery 2 жыл бұрын

self weight of beam calculated as uniformly distributed load in kN/m. 0.23 x 0.375 x 25 = 2.156 kN/m.

@darwinvillamor937 3 жыл бұрын

no load for roof??

@deepbhavsar5231 4 жыл бұрын

*For Column Selfweight is in KN* and for wall & slab it is in KN/m?? Why??

@CivilEngineeringMastery 4 жыл бұрын

Load transfer mechanism is slab to beam,beam to column and column to foundation. Slab loads are area loads, we calculate per m^2. Wall and beam loads are uniformly distributed loads which is kN/m. Column loads are axial loads which is kN. Please refer the below link for more details. kzfaq.info/get/bejne/d7B3ZK2a3Z6ydJ8.html

@zarghamhaider735 2 жыл бұрын

Mam. 125x25 (unit weight of rcc is 2500 but not in m2

@CivilEngineeringMastery 2 жыл бұрын

Unit weight of RCC is 25 kN/m3.

@mohankumars9877 4 жыл бұрын

How do we get that influence line diagram

@CivilEngineeringMastery 4 жыл бұрын

Influence area is calculated based on center to center between column. Please refer the below link for more details about influence area kzfaq.info/get/bejne/ptqRdpWZycqZiY0.html

@mohankumars9877 4 жыл бұрын

@@CivilEngineeringMastery okk mam

@vishalsharma2290 Жыл бұрын

How to extend my Ground floor column... For first floor.... Ground is old construction now I want to construct a first floor

@CivilEngineeringMastery Жыл бұрын

Kindly contact the engineer who is available at your location. Without a proper analysis of the existing site condition, we cannot guide you.

@vishalsharma2290 Жыл бұрын

@@CivilEngineeringMastery local engineer ask about rebaring ... But I m not rebaring nis safe for column member....

@ezhilarasan3776 4 жыл бұрын

This method only used for g+2 building?

@CivilEngineeringMastery 4 жыл бұрын

No.Influence area concept is same for all the buildings.Only loading we need to consider according to the type of the building.

@ezhilarasan3776 4 жыл бұрын

@@CivilEngineeringMastery thanks for the rply

@rajalakshmirajendran7259 3 жыл бұрын

How to draw the influence area drawing mam...

@CivilEngineeringMastery 3 жыл бұрын

Please refer the below link kzfaq.info/get/bejne/ptqRdpWZycqZiY0.html

@elliotfamutimi9776 2 жыл бұрын

Why is wall load not included for beam load calculation

@CivilEngineeringMastery 2 жыл бұрын

Wall is load calculated separately and added with the total load. Please watch the complete series (part 1 to part 5) for a better understanding. Part-1 www.youtube.com/watch?v=q8-pu... Part - 2 www.youtube.com/watch?v=XSptm... Part - 3 www.youtube.com/watch?v=7cpyZ... Part - 4 www.youtube.com/watch?v=0RXEc... Part-5 www.youtube.com/watch?v=vjSE1...

@ultimatewarrior3829 2 жыл бұрын

Mam i have work for you like design calculation estimation etc we have small consultancy. I will pay

@CivilEngineeringMastery 2 жыл бұрын

Kindly send your detailed requirements to civilengineeringmastery@gmail.com.

@shamsheralirana3127 3 жыл бұрын

Madam size of Column kese mila? Kyunki size of Column find out karne ke liye humare paas Load hona zaruri he.

@HammadBashir809 3 жыл бұрын

by trial you can do. with experience

@shamsheralirana3127 3 жыл бұрын

@@HammadBashir809 Assalamu alaikum sir, Sir matlab ki pehle hume assume karna padta he Column ki size jese 9'×18 , 12×18 etc Right?

@HammadBashir809 3 жыл бұрын

For larger span, load will more Column size will large. For smaller span it may be small.

@yirrroy22tyrri82 3 жыл бұрын

I cannot understand how we calculate wall load in per unit squ.area???! Why not per unit length kn/m???! If the slab to be designed is flat slab then ok its logical to take partition per unit area.

@CivilEngineeringMastery 3 жыл бұрын

Wall load is calculated for kN/m only.

@yirrroy22tyrri82 3 жыл бұрын

@@CivilEngineeringMastery ok thanks but you still wrote down in kn/m. sq

@CivilEngineeringMastery 3 жыл бұрын

That is partition load(kN/m^2). Please refer IS-875