In the Lab with LOCTITE® - Proper Use of Cyanoacrylate

Рет қаралды 64,995

6 жыл бұрын

Host Phil Godeck and Henkel Engineer, Lawson Sargent, show how to properly apply LOCTITE® instant adhesives to achieve the best adhesion.
LOCTITE® Instant Adhesives: www.na.henkel-adhesives.com/in...

Пікірлер: 30

@josephjorgensen3282 Ай бұрын

We use this product at work to glue or veneer stacker belts together at work. It works great. They are a felt belt that we glue and clamp for fifteen min and go right back to production

@madyangeles5258 3 жыл бұрын

i want to do some stone art is this glue suitable?

@abhisheksa6635 2 жыл бұрын

Can I fix my cycle tyre cut with this, it is at the rim end of the tyre?

@phillipakee5509 2 жыл бұрын

phil akee hawaii loctite is a excellent product hands down

@yassinzamriabu3064 2 жыл бұрын

Can somebody tell me. Between loctite 401 vs 406 apply to plastic part.. PP to avoid a crack

@justinsmith2394 2 жыл бұрын

Does anyone know if this product can cause olfactory hallucination, everything I smell now smells like loctite

@SanKraN87 4 жыл бұрын

how long this will last on car tires? i want to glue some tyre letters on them and they recommended this glue.

@jesusvidalpradosantibanez1230 3 жыл бұрын

loctite 411

@mrmeach1967 Жыл бұрын

It’s sort of amusing to me that both guys fumbled the pronunciation of “cyanoacrylate” at the beginning (0:24) but nailed it correctly (2:04) at the end.

@rudydaberry122 3 жыл бұрын

Would this be good for sealing a headlight bulb to its base?

@cocvillage5283 3 жыл бұрын

i wonder too .... mine has problem with custom projector (swap led) .... common epoxy dont stand the temperature . later i prefer 272 series up to 232° c

@rudydaberry122 3 жыл бұрын

@@cocvillage5283 you having headlight bulb trouble? It’s not staying in its mount?

@cocvillage5283 3 жыл бұрын

@@rudydaberry122 the (hid) projector lens base once disassemble from the bowl part , upgraded to led chip (from hid 35w to led 120w) . the glued part keep loose on high temperature .....

@masonbloomquist2124 4 жыл бұрын

i know this is obviously the recommended top brand but will superglue work the same as Loctite for small screws?

@qwertykeyboard5901 2 жыл бұрын

in my experience, cyanoacrylate is cyanoacrylate. There is next to zero difference between brands.

@IKvASS 5 жыл бұрын

I lolled so much.

@mrmeach1967 Жыл бұрын

Can’t see the gap (the camera never zooms in tight enough). It’s still not clear to me exactly how dabbing 4 drops, 90 degrees apart creates a better adhesive layer than applying a few drops at the center. Seems like drops near the edge would squirt out past the edge, into the air and onto your fingers, which is maybe why they’re wearing nitrile gloves for this demo?

@tuanas458 Жыл бұрын

The gap part I can't explain, but my guess is that if you leave a small gap, youre using the glue as "in between" material because if theres no glue, you don't have a material that acts as the in between. As for the 4 drops, it's just to prevent glue from oozing out the cracks. 4 smaller drops spreads out just enough without dripping over the edge.

@chessasheppard5768 7 ай бұрын

I believe the center has a slight recess (indent). You can kind of see it. But by putting the glue in there, it ends up being a large space between the inside of those center recesses (a big gap).

@ianmoralescasillas1043 3 жыл бұрын

901 or 945?

@luigimorenosanchez2347 9 ай бұрын

Diferencias del 401, 495 y 460

@loctiteNA 9 ай бұрын

We are happy to assist with your product & technical questions. We need additional information to ensure we are providing the best answer, so please feel free to contact our Technical Experts at Support center | Henkel Adhesives (henkel-adhesives.com)

@0-Elias-0 3 жыл бұрын

Please re-examine your product's container. Problem #1: I couldn't squeeze the glue out of the container Problem #2: The cap fell off from all the pressure (see #1) Problem #3: The glue that I salvaged doesn't seem to adhere the joint Problem #4: I've got glue all over my hands Note: I bought one of your larger items (52ml bottle). I think some kind of chemical reaction happened while the product sat on the store shelf. That reaction made the glue too viscous to squeeze through the tube. Good news: the price-per-ounce of your product is much better others (retail price) Bad news: I can't rely on your product

@0-Elias-0 3 жыл бұрын

Retailer = Big Lots Superstore Date = June 1, 2021 Location = Jacksonville, FL Product = "Go 2 Glue" Size = 1.75 fl oz (52mL) Price = $6.00 (US) Thanks

@qwertykeyboard5901 2 жыл бұрын

I HATE NUMBER 4

@patricksheehan151 Жыл бұрын

Looks like i picked the wrong week to quit sniffing glue. BTW do not use any of these products on your AIRPLANE.

@patricksheehan151 Жыл бұрын

Also thank you for performing this test and others like it. You go out of your way and take no shortcuts in order to earn the credibility you deserve.