You to sir...Thanks...

Yeah they can be tricky to fix, so good job on getting it going again...

Glad it helped! Appreciate the great comments...Have a great day...

You're very welcome! Glad it helped...

You're very welcome! Always happy to help out...

Glad I could help!

Awesome...

+Bob Kies Thanks Bob...

Awesome, I'm glad it helped. You have a great day!

Great to hear! Have a great day.

Glad I could help! Have a great day...

I appreciate you too, thanks very much.

@@Reviewing_Playing_and_More_RPM welcomee keep it up

+Muscle Car Appraisal Thanks appreciate it...

You're very welcome!

Will do, thanks for advice and glad it helped you out...Thanks...

You are so welcome, appreciate your support.

You are very welcome!

Thank You, same to you...

You too, Thanks...

You're very welcome!

Glad you like them. Got another build guide coming as well. Thanks

Awesome, you're very welcome!! Glad it helped...

+Justin Bennett Yep will be a good day when cables are not required for most things...Thanks for watching...

+Vendetta Gaming Thanks for watching...

Thanks you have a great one as well...

Thanks...

Well hope it was mine you watched lol.

Glad you liked it. Have a great day!

Thanks...

Glad I could help. You have a great day!

+Scott'sJourneys It was a tricky thing to figure out but made for a good video...Thanks...

You're very welcome. Glad you liked it.

Glad you enjoyed it...Thanks...

lol, yep think we've all been there...have a great day...

My pleasure, hope it was helpful. Thanks

Glad it helped. I have found recently they have updated the software for Options and if you have the USB Dongle inserted it'll ask you to then turn on the device and recognize it now, then turn the 2nd device ie mouse or keyboard depending on what you did first then it'll recognize it as well. After that it should then be good.

@@Reviewing_Playing_and_More_RPM are you saying that dongle can be used like Bluetooth . Can you clarify a little more.

@@ramsharyt No just that once you use Options to connect on one PC, then you can repeat the same process on a 2nd and 3rd PC and then whatever of those 3 PCs you plug into it'll be recognized easier then the software from before.

Thanks. I also noticed the new Options software makes this process much easier now as well.

Happy to help with your decision.

Awesome, glad it worked out. Have a great day!

You are most welcome.

Good point! Maybe I'll do a follow up video...Thanks...

You're very welcome. Thanks

Yeah they need to seriously up the directions though, this one was a a pain to figure out...Thanks...

@@Reviewing_Playing_and_More_RPM yea

I did after installing the Logitech Options, having the one unifying adapter then did work after that...

I use a HDMI Switch to go between PC's so that might work for you. Yes you will need to switch from HDMI 1,2 and 3. Hope I got that right, if I missed anything let me know. Have a great day.

Cool. Thanks

Cool, I love everything wireless...

Awesome, glad it saved you some money.

Yeah it should be very simple.

🤣😂🤣😂🤣😂

You made my day! I have been trying the instruction on package (fn+P), never works. Thanks.

No there is no backlighting, no colors at all but it works great...

@@Reviewing_Playing_and_More_RPM ok thanks for the reply 😊

I didn't use the Bluetooth, but yes it should work fine...

Thanks, have a great weekend...

Yes, you can setup a second monitor on your laptop, but yes like you say it'll depend on if you have the right inputs or outputs from laptop and monitor. Newer laptops should be able to do this for sure, but there's always getting a universal docking station that might help as well.

No, it'll work with it off...

You're very welcome.

You're very welcome, and thanks so much for your support.

I did get it working but yeah it was a pita to get it working and when I changed PCs had to work with it all over again.

Thanks...

You'll need the USB dongle for the mouse and keyboard to recognize the devices when you first set everything up, and I switched it to each different PC as I set things up...

Yes you need to install the Logitech Options software, it's very small in size so unless your completely out of room it'll be good to go...when you install the software on the 2nd system it will see the original unifying USB Receiver and will work then on both, can't say for certain how on MAC though, have never owned one...hope that helps...Thanks...

Completely agree, it was far more complex then it needed to be, have a great day...

If you do a Search for MK850 it should give you the details and info to buy it...Thanks...

Thanks man, it's always surprising the wasted involved with these products for sure...

I had the computers at one point using a HDMI Switcher to change between computers until I had everything setup. I bought it separately. It should work with XP might take a bit more to setup though, can't say for certain as I haven't used XP for a few years now.

Yeah, it does provide another way to use it. Glad it helped you out. Thanks

So you can switch between PC 1 to PC 3 by clicking the button but not more than that at the same time. To switch over to a different PC and use the keyboard, mouse and different PCs I'd get a KVM Switch. It works great and I'm now using one. Hope that helps. Thanks

@@Reviewing_Playing_and_More_RPM Awesome! Thank you for your response and suggestion. I used to have a 4 source (HDMI/USB) KVM (model: MT-VIKI MT-HK401). Lovely switcher!! But I blew the USB ports on it (and my mouse's usb wifi receiver) by connecting an unsuitable (higher voltage) power supply. I really only have 2 (maybe 3) PC's to switch (I used to connect a stick-PC as well), and my current monitor allows (albeit inconveniently) for 2 HDMI input switching. My mouse as well (toggle under the tummy), it's really just the keyboard that's an issue. So, I'm considering my options... and this Logitech product looked good, with a comfortable looking keyboard (similar to the MS Ergonomic Keyboard back in the day). For anyone interested, the MT-VIKI MT-HK401allows switching between 4 different Laptop/PC's. It has a wired remote switch, configurable (2 or 3? options) keyboard switching too (no drivers required), additional USB port (x2), audible switch sound (can be disabled), optional power input. It was awesome!

Good luck with what you decide.

I showed how to use this without Bluetooth, so it's in the video...not sure if it will work with an IPad especially without Bluetooth as an option...

Plug into a USB Port on each PC, moving it to each other PC as you go along...

Not sure the Logitech Software for this keyboard should let you make those changes, I checked the link to the Logitech Website and it worked you might have typed it wrong possibly. Not sure why the software would pose a problem but there's no way around it that I can think of at this time. You can skip the registration for the software and go directly to software to install it to make things work. Hope that helps.

OK, thanks!

I haven't tried that but it should work, in theory at least...

@@Reviewing_Playing_and_More_RPM Do you have an extra logitech unified receiver to attached to another pc, then use the white key 1 2 3 to test the switching ? i have read else where that logitech keyboard in general connects with 1 unified receiver only. I just wonder if the 850 /mouse have a 2 or 3 profiles builtin.

@@dukenguyen4701 I only use 1 Unified receiver, both the mouse and the keyboard have a 1,2 and 3 button, so once you set up one PC, then you can switch to the other PC and chose 2 and on the 3rd PC button 3 as well...so yes 3 separate profiles for both mouse and keyboard...hope that helps...

Your Very Welcome, glad you liked it...

Thanks appreciate you liked it...

On the Keyboard and the mouse as you change from 1 to 3 it sends a different signal, so that lets you control different PCs each time you switch, same for the mouse. There is new software now that let's you control them easier as well.

There are other ways to use this now, the software has been updated and it made a big difference, if you haven't updated it in a while, give it a try. Hope it helps.

Not certain but think it's Hold down "fn" and press "Insert" to take a screenshot of all active monitors. I'll try it later and see myself but pretty sure that's it...Take Care...Thanks...

Reviewing Playing & More RPM I tried that it does not work. I appreciate your support

Reviewing Playing & More RPM FYI. I only have 1 computer and 1 monitor.

If I figure it out I'll post again to let you know...Thanks...

Entered!

I'm not well versed in Mac products, but did Options work with your Mac?

@@Reviewing_Playing_and_More_RPM it’s working flawlessly in mac.. trouble is in windows.. it disconnects if i leave the mouse idle even for 5 sec

@@vijaikalidass I'm not sure but try to keep other electrical devices 8 inches (20 cm) away from the keyboard, they can sometimes cause interference (although I don't think it is this) I'm wondering if there is something under the Options software that might help, not sure if you checked already...while a long shot check Secure Input, is it enabled if so try turning it off and see if that helps...

Haven't made a recent one, but it's something I'll think about doing though. Thanks.

I've been able to use it with just one unifying receiver on 3 systems.

@@Reviewing_Playing_and_More_RPM The unifying receivers pairing need power cycle the keyboard or mouse, if power cycle the MK850 stay with the selected channel/device will be working with the pairing mode.

@@bingwu4293 I just know for me I am using one Unifying receiver and each PC will recognize the mouse and keyboard. I've not need to do anything else.

This uses the same Keyboard being used for all 3 PC's...I just click the button that responds to the system being used...you can use a different keyboard if you wish though...

FN + Insert copies screen to clipboard. To capture screenshot to screenshot folder press and hold FN, then press and hold "Start" key, then hit Insert key.

No I don't have a Chromebook to test it with but it does use Bluetooth as well, so as long as your Chromebook has Bluetooth it should work...

Well once I program those satellites, it's to Rule The World hehehehehehehe....

@@Reviewing_Playing_and_More_RPM an excellent plan! Let me know if you need some pawns or minions when the time comes.

@@Obiter3 Minions yeah gonna need some for sure...

+Tcharly Dessine Thanks appreciate your comments and support...

It's possible that with the lack of availability of products these days it's sold out, and will be replenished soon...

Yes you can.

@@Reviewing_Playing_and_More_RPM Thank you very much dear.... Now, I am going to buy it...

@@azam4web Enjoy.

wow not sure I remembered that, very nice info.

+A cu Thanks...

It's a hard felt like surface, nothing has worn off on it yet...

Reviewing Playing & More RPM thanks !

The remote is separate from this video, it's from the one on using a HDMI Switch to control multiple computers with one monitor, which is what the remote is doing. I used it to show that as I switched to each different computer the mouse and keyboard were working. With both the HDMI Switch and the Keyboard and mouse to work with each different PC it makes doing things much easier then having a separate keyboard and mouse each time...

@@Reviewing_Playing_and_More_RPM I use one wireless keyboard and mouse and one monitor, for two computers. I'm looking for a really fast way to switch from one computer to the other. What would you do? I just watched your other video "Connect Multiple Computers or Devices to One HDTV with HDMI Switch HY 3301 V0 E at kzfaq.info/get/bejne/esVhaKSY2cC6iYU.html". I've got three inputs on my HP Pavilion 32q monitor but switching between the inputs is a HUGE pain (in certain locations). I have to keep cycling until something shows up, sometimes opening a laptop lid.

The HDMI Switch works great for me, but if you need seamless switching then you need a different HDMI Switch, when you have the right product it will switch almost instantaneously and will work much better...Mine was a cheap one to demonstrate how it can work. I am including a link on Amazon that will give you one of the products that will work much better and should help you out...www.amazon.com/Revesun-Multi-Viewer-input-output-Switcher/dp/B01D89JEDI/ hope it helps...

@@Reviewing_Playing_and_More_RPM but you'd suggest the mk850 for the keyboard and mouse, switching each of them independently?

Yes, it works great, for me anyhow...and when you remove a PC and then add another computer you just have to install the Options software again and it'll work on that one then as well...

Fixed the link, thanks for letting me know..

It works with Windows, Mac OS, Chrome OS but doesn't mention IOS, so not sure since I don't use IOS myself.

No there's no RGB or backlighting for this keyboard.

I don't know of any Monitors that use a keyboard, but it's always a possibility...

@@Reviewing_Playing_and_More_RPM Alright thanks!

Sorry I don't...Thanks and hope you find an answer...

Try changing language to English usa

You could use it for PS4 it has Bluetooth as well as USB...

I did use the unifying USB receiver, but I had to remove it and place it in each PC afterwards to get it to work, was a real pain actually, but yes you could use Bluetooth also...

Yes, it'll work great...

@@Reviewing_Playing_and_More_RPM Ok thanks! We got it and works fantastic!

@@daeve8039 Great...good to hear...

It'll be in the manual or online on the logitech website...

@@Reviewing_Playing_and_More_RPM There is no manual.

@@roberthigdon3686 Everything can be configured using the Options software, the DVD comes with the Keyboard and Mouse and is included when you receive it, but newer versions are also online should it go missing...Once you have the keyboard and mouse connected the duolink feature will then be available as well...also through the options software...hope that helps...Thanks...