Рет қаралды 61,942
After watching some videos on how hydraulics work in general I examined my Long 460 purchased feb 2017. Despite being built in the 80s, this thing still works hard. However, my 3 point was stuttering and slow to react. Found the problem to be water in my fluid. I apologize for leaving out the drain and fill locations. I can try to cover that in a later video or edit and re-upload this one to include those locations if anyone else wants to know. I do mention the return line where the in line filter is. I pulled it with a pair of needle nose pliers (gently) and cleaned it with gasoline before blowing it out with an air compressor. I am not a professional. But this fixed my issue. Also, it might be worth mentioning that the return line is lower than the drain plug and will hold the old fluid after draining unless you blow it out with a compressor after removing the inline filter and completely draining the reservoir.