The Old Man Jimcee be looking tight watching Shorty's six. You have a bad ass crew of trucks going on there. Loving the work you put into these toys!

I think a y pipe to a 3” single would sound good and leave room for possible *cough cough boost* options later on down the road

I’ve always wanted a single cab Sierra but I ended up buying an extended cab and now I wanna slam it with some boost. Amazing looking trucks man

It don’t take much to make those trucks run 12’s man. All you need now is a cam, stall, a custom tune and remove a little weight.

Nice find. Poor guy who lost the ratchet though those ain’t cheap😂

Always love when i get a notification from the channel!

Loving the videos man. I got short tubes on my Ram and love them can’t ever go wrong with headers

Hell yah can’t wait to do my Sierra the tips are great -- keep making videos

Go with the x pipe and true duals like the setup on chomper.

Oh yeah! Loving this build 😎

you are setting up for a street/strip truck. Id start out with exhaust cut outs where you can swap from open headers and also go on out the back with a true dual system out the rear like it is

keep up the awsome work

Run the dual xpipe speed engineering sells with dual mufflers been wanting to see how it sounds I have the 1 7/8 headers and xpipe on my truck with true duals out the back with 5 inch slants. It’s got a stage 3 btr cam with cai and a 2800 stall dynoed 335 on 37s on a 8.5 lift so I lowered it back down to 3.5 she’s pretty quick

You need to keep this truck for your son. Be a great first truck for him!

Score on the ratchet! That's dope 😂

Love the content man, keep at it🤘

Bro you braver than me I definitely ain't lighting a torn anywhere near a gas engine 😂

You need to do corvette style exhaust coming out the back under license plate

My 07 Tahoe z71 at 227k and she has all her studs/nuts😌none broken/snapped idk how but it’s a miracle 🙏🏾

looks good and sound pretty mean open header!

Bro I love how you are slowly getting into the dropped truck scene #suelomob

Get the x pipe kit made for those headers. Then have a shop make a custom exhaust after that

You gotta do just header one time for a comparison

Great video I recomend (Soler Preformance) throttle body. Based in Alabama

Love the vids keep up the good work

I plan to put a set of speed engineering 1 7/8th headers on my 2010 gmc Sierra

For future reference on the driver side you can pull that little steering shaft so you don’t have to pull the front drive shaft. It’s a lot quicker and easier

I’m running tru dual to xpipe dumped but you ca always start with ypipe to maybe a corsa 3inch

The socket wrench was funny

I don’t know about everybody else, but I usually hold my torch on each bolt for at least a minute or two. Yes, it might be expensive in torch gas but it’s worth it

Double x pipe and black widow race mufflers, would sound money.

Do a catless exhaust with a muffler and also have electric cutouts on it

Grille guard on the yukon?

On my suburban with a stage 1 cam on the 5.3 I would do long tubes, to a y pipe 3 inch to a flow master super 40 out the passenger side.

You can’t beat the bang for the buck with these 5.3 silverados

Boom tube exhaust or equal length exhaust

Drag truck in the making

how did it fit around the front diff mount?

Stay with the Y pipe with single exit exhaust!!

Could you post the link to purchase them?

Do you have a link for those headers?

I say just stay with the y-pipe for now and run 3 in from the y-pipe back with either the magnaflow bullet part# 14419 or the corsa pro series mufflers either the packed resonators or the tuned muffler. Can’t go wrong with either of the 3 and maybe a nice dual corsa style exhaust tip behind the tire or in front would look sweet!!

Corsa sport trust me on this one it will sound nasty with a dual tip also

What you want for them stock rims over there on the wall over there

True dual with Flowmasters with no cats and a X pipe with turn downs would be really nice on that truck

Get a ctsv x pipe and run equal lengths……it will give it a vette sound

Soundin’ sweeeet

Any lights on dash from o2's

I have a FBO SCRB f-150 5.0 10speed if you ever wanna compare it

It looks awesome.

My boi when you use a torch it obviously creates heat, when metal heats up it expands therefore making it “looser”

I need that factory y pipe 😂

True duals with 5in tips

Y pipe to quad exit u see the plate like a corvette

Do a equal length exhaust on it with x pipe you won’t regret it

BIG OLE LOUDY BOIS

Lower tail light/brake light out on the driver side

True duals all the way

Try some spin tech mufflers

Can you put a Denali grill on shorty please, and a single turbo would be crazy

Dang finding that ratchet it like finding 100$ bill on the ground lol

Those hardly look rusty. Mine have 280K and several broken heads. BTW if you get the glowing red it works better. Hot enough to sizzle spit is just enough to break down the thread locker. Need to replace mine, but knowing I have at least 4 bolts I'm going to need to weld heads on has pretty much kept me from that....

true duals with black widow neighbor hater mufflers

Truck Norris cam and wet shot of nitrous

👍

Do an equal length setup. Isn't the easiest to do but it's worth the effort

Next thing it needs is some 243 heads

True duals please!!!

Do 3in cut outs

True dualls

Super informative video... but for the love of god, PLEASE stop calling bolts 'studs' lol Also, I think an equal length (Karnage DD Equalizer loop) w/x-pipe merge would sound the best. I plan to do this eventually with my 6.2L Denali and a set of Spintech 6000 series mufflers

it needs a spintech 6000 muffler

I would go true duals!!!!!

do an X pipe and carven R exhaust !

Cherry Bomb with true duals

😎🤘🏆🏆

Corsa extreme.

Still waiting for you to put shortys on Larry

It’s a RATCHET!!!

I think true duals

How the hell did that ratchet stay there 😂

Need to take the 4x4 stickers off.

Buy baby squat back please!!!!!!!!!!!!!

Side exit

Put a corsa muffler not a bullet

I vote y pipe

Ok so you got a good ratchet now please get a tool cart or something that busted up plastic is painful to see😂

Please buy back baby squad

Just go ahead and x pipe it, sounds better

First

If it was me I would do equal length exhaust with a x pipe to quad tips under the license plate

You 100% need a pipe

x pipe

Carven r

Try a H pipe true dual🤔

looks good and sound pretty mean open header!