No video
longer TINY WHOOP flight with the LVC mod!
Рет қаралды 76,160
Күн бұрынThe "How To'" starts at 2:15
On Inductrix and Inductrix FPV flight boards, a feature called Low Voltage Cutoff (LVC) forces you to land when the battery gets too low. The intention is to keep you from ruining your batteries by running them to low, but in reality it often time kicks in too early, especially when your aircraft is modified with higher current motors. In this vlog, I'll show you a modification to the board that will inhibit LVC.
Perform this mod AT YOUR OWN RISK. Soldering such small components can be challenging to take your time and be careful And be extra sure to set a timer and listen to it, just like you would with a mini-quad. Without the LVC, there won't be anything to stop you from ruining your batteries.
If you have any questions about this, don't hesitate to ask!
Thanks to the Tiny Whoop community for figuring out this mod and Mike Chin for showing it to me.
Thank you to Main Street Billiards for hosting this event, we all had a great time
www.mainstreetb...
my bee-brain tiny whoop setup:
Bee Brain flight controller: goo.gl/zxPtKV
"Insane" motors: goo.gl/Fv9LnN
FX798T 25mW mini fpv combo: goo.gl/SyUCxy
Blade Induxtrix frame: goo.gl/OUsjNU
Red Tiny Whoop props: goo.gl/gieb32
TigerHobby batteries: goo.gl/zHTeG8
Excel batteries: goo.gl/PIfYai
Emily's Tiny Whoop:
Inductrix flight controller w/ LVC mod
"Insane" motors: goo.gl/Fv9LnN
FX798T 25mW mini fpv combo: goo.gl/SyUCxy
Blade Induxtrix frame: goo.gl/OUsjNU
Green Tiny Whoop props: goo.gl/gieb32
TigerHobby batteries: goo.gl/zHTeG8
Excel batteries: goo.gl/PIfYai
#teamMQC
www.miniquadclu...
Excel Drones
www.excelrc.com/
Music in this vlog by Pryces:
/ pryced
Follow:
Instagram: @drewcamden
Twitter: @drewcamden
Contact:
backwardsbird@gmail.com
Drew Camden
P.O. Box 80
Clawson, MI, United States 48017
@jamespierce2415 6 жыл бұрын
DUDE!!!! Bought this inductrix for my little brother and totally stooped it. 25700kv motors, 3 blades props and a 50mw vtx with a 2db dipole and this thing was pretty, the lvc would always kick in 5 seconds into flight... so I saw your vid and tried this, I actually accidentally desoddered those 2 resistors and the other two right next to them, I bridged them and now I actually fly and fly continuously, so far I’ve hit 4:26!!!!!!!! Which for me is crazy time and I greatly appreciate it, also if you read this whole comment I appreciate it even more. Thank you
@Demoni696 7 жыл бұрын
The LVC is measuring the battery voltage under load conditions, you are testing static voltage with that meter. To get an accurate reading of when the LVC is cutting power to your quad you would need to test the in line voltage of the battery. Lipo packs should not be discharged below 3v depending on the amp draw an cell resting at 3.8v can dip below 3v when being loaded.
@wakkaflakkadown 6 жыл бұрын
Thank you, thank you! So sick of my inductrix leaving over 4.0V on the battery at the end of a flight. This is easy and and it works. Got back to 3 minutes with 3.86V left. Amazing.
@thermos73 4 жыл бұрын
Did the blob solder. I thought I toasted the board because it got too hot and I got resin on other components. Nope! Amazed it works. Thanks for the vid.
@jubifpv665 7 жыл бұрын
Drew, great content, as always. I really do like the format and your editing style :) A note on the lvc and the powerwhoop connectors. First you should upgrade the connectors to bigger ones. The problem is the increasing voltage drop of the pico blx connectors. Molex's official statement about them is that they are worn out after around 20 connect cycles!!! Typically the time when everyone experiences decreasing flight times... The Reason is the increasing voltage drop due to the increasing resistance at the connector. So. When the batt still has lets say 3.9V the FC will only be able to read 3.9 - voltage drop....Long story short. replacung the connectors will bring back the flight times AND as Second advantage will give you more power. Definitely go for an upgrade! Its worth it ;) Removing the lvc does not eliminate the actual problem. Its just a workaround to deal with it... For a more scientific explanation on this topic search for TinyWhoop battery mod on YT. There is a guy who explained it perfectly... Happy flying man. And cheers from germany :D
@LeDribFPV 7 жыл бұрын
Thank you Jubi Great info here, thanks for sharing. I like this mod because it will give you back your flight time without having to buy a whole new set of batteries in order to have the new connector. Plus I just want my whoops to be like my real quads, where its up to me to land when I have to. But you are absolutely right that the improved connector is a great upgrade. I've heard from lots people that the Powerwhoop connector and HV batteries is the best upgrade you can do. I'm hoping I can place an order with Tiny Whoop soon so I can make the switch :) Thanks again
@blasbike 7 жыл бұрын
Thats what actually happening. What a shame such big RC company is using pico blx conector for RC models, 20 connects and you are done. With JST-PH 2mm it is like new life for TW and so much power.
@wgp8ntballer 6 жыл бұрын
Link?
@reizhustenistdoof 6 жыл бұрын
thanks man for this comment :) I ordered 100 pcs of jst ph 2.0 connectors (I think this are the powerwhoop connectors) and was thinking about doing the lvc mod in the meantime. But if the connectors solve the problem I won't do the lvc mod. Since I am maybe going to sell the inductrix and change to an e010s (because betaflight), I can easily change back the plug. But its way harder to undo the lvc mod (if you just short it out)
@valentinojimenez3955 5 жыл бұрын
Hey I got a big question regarding this..... Can you find tht spot on the clone miniwhoops?????
@johnking975 5 жыл бұрын
oh and i cannot thank you enough for showing me this, you have made my whoop 100 times better than it was before. and now i can solder on the lil plug again and use all these smaller connector batteries that are sitting around gathering dust. im gonna just sacrifice one and see how long i can keep the motors going lol. Thank you again man. This was a game changer seriously and this should be the first thing anyone does when getting an inductrix drone...
@BlackBaronFPV 6 жыл бұрын
OMG Drew!! Amazing tip bro!!! I just made it myself on my own Inductrix and is working like a dream. Thanks man! Love from Argentina.
@MrJarrod 6 жыл бұрын
Thanks, I am not an aggressive flyer , I get usually 4 to 6 minutes on HV batteries so I don't need this mod YET! but will remember this in future.
@morganym20 7 жыл бұрын
I'm glad somebody made a video about this I did this mod two or three months ago and I wouldn't have it any other way! I actually was able to bridge a small piece of wire and solder that, but your message looks way easier mine came on done like 2 times before I have had it mastered! you're the man.
@AWiT1013 7 жыл бұрын
Super handy mod! I bought a new inductrix because I was always having batteries stop at 4.05v and this made my old one work like new again! Seriously u rock
@LeDribFPV 7 жыл бұрын
Awesome! So glad this helped :)
@shawnjoo7228 7 жыл бұрын
finally someone posts a how to video on the lvc mod!
@LeDribFPV 7 жыл бұрын
:)
@valentinojimenez3955 5 жыл бұрын
Yea but what about for the clones??
@valentinojimenez3955 5 жыл бұрын
@@LeDribFPV helP pleasee can u find that spot on the clone tiny whoop{
@therileyobrien 7 жыл бұрын
I see that QAV-Skitzo box on the shelf. Awesome frame.
@LeDribFPV 7 жыл бұрын
😈
@marcoreviews Жыл бұрын
So cool! Fun to watch you have fun! #stayepic
@slobert1970 5 жыл бұрын
Thanks! I have three inductrix based whoops. I have old eyes and big meat claw hands so I was worried about the soldering, but figured if I screwed it up I'd get another board. All three worked out great and I went from the LVC cutting out at about 2:30 -2:40 min of flight zooming around the house to now my timer goes off at 3:00 and I land 10-15 seconds later and I still have 3.75 on the battery. I may extend the timer to 3:30. Excellent mod.
@backyardbasher 7 жыл бұрын
3.96 is not the voltage the LVC is triggering at. You need to measure the voltage when it is under load not when it's just stopped as the moment the load stops the battery voltage starts increasing, so the LVC will be triggering at a lower voltage than 3.96
@10fantic 7 жыл бұрын
backyardbasher You are right but you are also off. Everyone will discharge the battery till around 3.7/8volts under no load means the battery under load is around 3.2 volts per cell, they can handle load with under voltage. But nominal voltage shouldent sink below 3.6v as then you would cause damage.
@theibault 7 жыл бұрын
Fantastic tip Drew. Will be doing this on mine. Thanks bud and have a great week!
@jimmac 7 жыл бұрын
Thanks for the tip! Suddenly the pile of "useless" batteries are ok...
@mqcworx 7 жыл бұрын
Awesome video! Nice to see Ms. Emily racing as well! Hope to see you both again real soon! ☺️
@LeDribFPV 7 жыл бұрын
cant wait :)
@stevenphillips3774 7 жыл бұрын
Are you wearing eyeliner? Edit: honest questions, honest answers. Drib responded with a yes.
@quoxium8799 7 жыл бұрын
I think he's wearing eye shadow too. Cool by me though.
@T3hFr00bSh0w 7 жыл бұрын
i noticed a lack of eyelashes, could be related to a nervous tick, i got one similar.
@stevenphillips3774 7 жыл бұрын
No negativity, just an honest question
@jimbobfpv5989 7 жыл бұрын
No idea
@lurchtattoo 7 жыл бұрын
Steven Phillips definitely wearing eyeliner. ...no hate...just saying....
@HomeDaddy2x 7 жыл бұрын
Worked great. I was hitting lvc at 1:30. Did the mod and flew till it wouldnt lift off and got 3:35. The battery read 3.77 when I recharged it. Perfect. Set timer to 2:45 or so and were back in business.
@LeDribFPV 7 жыл бұрын
awesome! Happy it helped :)
@lamwk1969 7 жыл бұрын
wow thanks for the video, I am not good at micro soldering , just so difficult to form that blob as the solder just refused to leave the iron and deposit on the 2 resistors, only managed to get minimal solder with some clear flux deposited, you know what, it still works, before i had 10 batts all giving 30s-1min before LVC, but when i put these batteries to the original inductrix, the old inductrix would still fly at least 2.5-3min, and now i tried 2 fresh batts at 4.2v on the whoop, am getting 3 min(i stop at the 3min mark from the timer counter on the DX9) and indeed would drain till 3.78 or so..really thank you so much!
@Bigfootman 7 жыл бұрын
Flying Tiny Whoop at a bar , would be the ultimate drinking game !!!!! Every time you crash you have to chug . This could be the way to save bowling alley's from going under. The hell with throwing a 16lb ball around. They have plenty of open space and a liquor licence.
@NatureVR 6 жыл бұрын
I gotta say this worked for me!! I flew the inductrix on a 2.0 batter fully charged until it dropped out of the sky at 1:37 seconds just hovering the whole time. I shorted the pins as stated in the video and put THE SAME BATTER BACK IN and I was able to fly again for another 30 seconds, no cuttoff happend and when I get home I'm going to measure the battery. I hate the pre-mod version of my tiny whoop would cut out at 1:40 all the time. Now I can set my timer for 2 minutes and still have juice to fly back up stairs or to where ever I was flying from. Timer means go home now instead of be home by this time or you'll crash. It makes a big difference. Who cares if I kill a batter I'll get a new one. And I'll have better fligh times again haha.
@Matsci101 7 жыл бұрын
Nice Hack Man! Bam Margera does the eyeliner too!
@empTe81 7 жыл бұрын
I have a beebrain tiny whoop but I also like to fly my Inductrix FPV at times. The LVC mod was necessary for me after switching to special sauce motors today. I went from flight times of 1-2 mins to 3 minutes easily, always have been landing at the 3 min mark but I definitely have more juice to push it I think. Thanks for the how-to!
@JohnEFly 7 жыл бұрын
It was great meeting you! It was a great event. Sorry for dropping the S bomb at the start when you showed up making you edit it out :). Glad you put the guide together, hopefully that helps a bunch of people out.
@LeDribFPV 7 жыл бұрын
I was fun hanging with you man! And no worries, language stuff doesnt bother me at all, I just like to cut things out to keep things a bit more family friendly. I've been thinking actually using "bleeps" might be funny haha
@JohnEFly 7 жыл бұрын
I like that you keep things family friendly, I just made you do a little extra work. Btw, looked like some killer camera work in this episode ;). Glad I was able to help out!
@LeDribFPV 7 жыл бұрын
haha for sure! thanks for filming a bit :)
@davidfarmer1736 7 жыл бұрын
I like the video, I like going out and having fun flying, I love the fact that you were able to get your lover to join you. My wife doesn't want to wear the goggles.
@LeDribFPV 7 жыл бұрын
if it makes you feel better, we're best friends and not "together". Maybe I'll find a girlfriend into FPV one day though haha
@davidfarmer1736 7 жыл бұрын
I am sorry if I misspoke, I like the video. Keep up the good work. I am going to solder in better connectors on my Woop's and E010's.
@LeDribFPV 7 жыл бұрын
oh no worries! We get it all the time haha I actually just did a video about the upgraded connectors. Best upgrade ever :)
@Nicholas666able 5 жыл бұрын
I always find my self coming back and finding your videos so useful I watch them and all ways find my self having to come back for sweet tricks like this you the best
@FoFrx 7 жыл бұрын
I think you get more people at a tiny whoop event on a wed. than I do with my band at most bars these days.
@Diamondskylinex 5 жыл бұрын
aw went back to this video, rip old girlfriend hope she is doing well.
@lordharr123456 7 жыл бұрын
Great video! i will do that to my tiny whoop soon! thanks!
@timk9727 7 жыл бұрын
Thanks dude! I'm glad I'm not the only one experiencing this issue!
@justinfabricius1597 7 жыл бұрын
The thumbnail made me think he was going to power the whoop with a power supply in a Tether formation. you would obviosly be severly limited by the cable, but you could fly "infinently". Until something else burns up that is.
@Jdogg5343 6 жыл бұрын
Glad i found this video a whole freakin year and some months later atleast now I can pester my dogs for longer and they wont tear up my whoop when it just falls out the dang air!
@wgp8ntballer 6 жыл бұрын
Awesome video bro!! Just did that to mine and the flight time is much better!! Keep up the awesome work!
@essential.academy 7 жыл бұрын
thank you so much for this mod! My brother bought me a blade inductrix fpv and himself I tiny whoop and mine worked and his didn't and now after this mod his works so I feel so great! So wicked thank you so much!
@LeDribFPV 7 жыл бұрын
super happy it helped!
@essential.academy 7 жыл бұрын
Le Drib I'm having hard times with another tiny whoop that I have . this one with the makerfire Evo FC I am turning it in betaflight yet it also has very low flight times and intermittently will seem to get stuck in a command and fly off in One Direction. I did the battery connector modification to this look but I don't think the board has a low voltage cutoff, any suggestions? Thanks so much for videos Rock!
@LeDribFPV 7 жыл бұрын
ah sorry man, I actually dont know anything about the Makerfire whoops :/
@BrianPhillipsRC 7 жыл бұрын
Thanks and nice video! I especially hate the LVC on the Inductrix because it will FALL out of the sky, usually at a horribly inopportune time!!! If the LVC would just start flashing about 10 seconds before cutting motor voltages, I could make that work...but Horizon Hobby in their vast wisdom couldn't resist forcing me to need to buy many Inductrix frames!!!
@VORT3XFPV 7 жыл бұрын
Solid work sir
@DroneOn 7 жыл бұрын
Wow it's amazing how far whoops have progressed in just 6 months since this video has came out.
@twenty4sixty884 7 жыл бұрын
Heck yea bro hit it up! I'm going down to check out Heisenberg and the Cleveland quad squad. He said the dudes in the Detroit multi rotor crew are really laid back dudes too!! I might try to see if they have any races or if they're just going out for some freestyle flying anytime soon.
@mssippijim 6 жыл бұрын
Finally got up the nerve to do the lvc bypass mod. Best thing I ever did for my seldom used tinywhoop (because of the horrid flight times). My batteries are old 150mah / 45C Eflites. I flew the first one for at least 4 minutes before it got weak enough that it didn't have any lift. Normally I do good to get 2 minutes out of one of these. Checked voltage after I landed and it was still at over 4V, but I suspect that is due to the age of these batteries that they won't discharge lower, or possibly the fact that they have not been being discharged fully on all previous flights. (might improve with repeated usage). I forgot to start timer on first one on time so 4 min. is an estimate but I'm about to fly another one with the timer accurate. I have 4 new 240mah 30C HV cells on order with the 2.0 connectors and a pigtail for the whoop. Interesting to see what they do, but I wish they were a little higher C rating. I think on these the C rating is about as important as the mah if not more so. Second 150/45 gave me a good solid 3 minutes, which is what I'm really shooting for, anything more is gravy. Mine has the 14kv motors from MMW on it.
@yourfathersmellsoffarts3624 7 жыл бұрын
I love the tiny whoop vlogs!
@TheTrapWarrior 7 жыл бұрын
So wait will this little modification give your drone more power as well or just increase flight times ?
@LeDribFPV 7 жыл бұрын
It won't add power, it just prevents the boats from forcing you to land sooner than you have to.
@markhondaturbo 7 жыл бұрын
thanks for a great tip! I just started flying whith others in tiny whoop races and it's the most fun. Laid back and easy going.
@Error62451 6 жыл бұрын
I did the mod I noticed a very big difference thanks very much
@michaelhaffner4505 7 жыл бұрын
Great mod! thanks Drew. Everybody loves mods n hacks n junks.
@Chuckles4200 7 жыл бұрын
I've noticed with lipos that they drop voltage fast when you let them sit fully charged for a while. I don't know how long but I guess the longer you leave it the weaker the cells will be. But what I do is drain them then slow charge a few times and the batteries will kind of recondition. It's worked great for me every time.
@The2xWhiskey Жыл бұрын
5:58 - The location of the board components being modded. My how far Tiny Whoops have come!
@ericmaggard6182 7 жыл бұрын
Wouldn't it be hilarious if this didn't disable the lvc but actually made the board unusable as a brilliant way to get back at all the people who leave negative comments? Haha, just kidding Le Drib. I love your videos btw and I'm gonna do this mod tonight. Thanks for the tip!!
@LeDribFPV 7 жыл бұрын
Hahah that'd be horrible! There's too many other great dudes leaving positive comments 👍🏻 The haters are just comedy to me :)
@twenty4sixty884 7 жыл бұрын
Dude fantastic tutorial!
@LeDribFPV 7 жыл бұрын
Thanks! I'm hoping to keep doing occasional tutorials within the vlogs :)
@andrewkaminskas7721 7 жыл бұрын
Good mod for the stock inductrix. But you just can't beat the 2.0 connectors with some nice 205mah batteries paired up. I was getting over 8 mins of flight time with my stock FC and 14000 kv motors no FPV camera.
@slyoldfox11 7 жыл бұрын
Thank you so much this is what everyone has been waiting for......
@LeDribFPV 7 жыл бұрын
hope it helps some people :)
@camdynkellett6782 2 жыл бұрын
I cant believe that thumbnail/title combo worked haha. people cant help themselves, but I do think its a bit predatory...
@badmofo350 7 жыл бұрын
Thanks 4 the tip man!
@L1L1TH1UM 7 жыл бұрын
cool! i need to try this with an HV battery and the power whoop connector. thanks for the info i hadnt seen this yet.
@LeDribFPV 7 жыл бұрын
yeah I was surprised its hard to find info on this mod. I think some people hesitate to share it around because its easy to ruin the board if you mess up the solder job
@LeDribFPV 7 жыл бұрын
Do you like the power whoop connector and HV batteries as much as everyone else says they do? I've been meaning to upgrade
@L1L1TH1UM 7 жыл бұрын
yeah i do like the combo alot. it really helps when you start putting higher RPM motors in your whoop. I want to try Rakon Helis new tri blade for the whoops too. but to be honest im about to build a brushless micro for the Multi GP micro class. Swapping brushed motors every two weeks is kinda pricey in the long run.
@jemlittle1787 7 жыл бұрын
The first FC's from HH had high LVC if your has a 0 at the end of the 4 digit code yours is old and HH will replace it with the new version.
@saitechnologies1420 7 жыл бұрын
If you buy furibee f3 board for the tiny whoop build then you won't need any modifications. I drain my 200mah battries made up of two 100mah lipos used in toy heli for whoop to almost 2.8 v I know it's not good for health of battries but as such I get pretty decent flight time of about 2.30 min to almost three minutes so if you are building new whoop check out that board on great best where as this mod is cool for those stucked with previous board. Hope this helps out some of you
@xistsixt 7 жыл бұрын
hv batteries 255 mah... with pwc connectors and the inductrix flies and flies and flies... and i think it does improve even the camera quality and range... love it even without switched off lvc...
@twrecks116 7 жыл бұрын
that was a AWESOME Tip!! Thanks for Sharing!!
@nueschtsNutzername 7 жыл бұрын
Would this be possible to the Eachine E010 too?? Thank's a lot!!
@WillGamroth 7 жыл бұрын
Have you seen the new brush less TINY WOOPS they look AMAZING.
@LeDribFPV 7 жыл бұрын
hoping to build some brushless micros real soon ;)
@MindlessFPV 7 жыл бұрын
Nice work.
@jfg22557 7 жыл бұрын
Nice content Drew! But I think it's safe to say that the BeeBrain running airmode with a good tune is really the best whoop flying experience, if you're used to flying 5"
@LeDribFPV 7 жыл бұрын
most definitely. Love my bee-brain! It was nice getting the stock boards to stop falling out of the sky though before I got the better board
@twizzle404 2 жыл бұрын
Older video, but just found it. Thanks so much - works great! How'd you identify which resistors to short out? I'm wondering if I could do this to other similar products - like Horizon's UMX planes.
@kevinvenesomphone7876 6 жыл бұрын
Is it possible to do this mod on an Inductrix FPV + board also?
@CNCmachiningisfun 7 жыл бұрын
When the battery fails, and the quad falls, does it land on a Tiny Whoopy Cushion?
@bigbaderek1978 7 жыл бұрын
Nice!! TY..worked great.
@crppenn661 6 жыл бұрын
Thanks man this help me lot. It worked! Nice eyeliner by the way
@NoNo_Notlikethat 7 жыл бұрын
Is there a way to set up the LEDs on the Beebrain FC to do a blinkety-blink like the inductrix board when your battery voltage is low? I tend to hand my controller to other people to try out my whoop, and it would be nice for me to have a visual to go along with the timer on the Tx.
@amill411 7 жыл бұрын
Someone help me please. While trying this mod one of the resistors that is supposed to be soldered over fell off my board. I continued with the mod and have it soldered as in the video however like I said one of the resistors is no longer there under the solder. Did I ruin the board or should it still work? It seems to hit some sort of LVC still, while the battery last longer I feel, after a point it starts flashing and the props keep spinning until you unplug it.
@Sqeefer 7 жыл бұрын
Can you roll an FPV inductrix without any modification to transmitter or drone? I'm new to the hobby and would like to start doing tricks. In aware of changing the mode to agility but I am having troubles getting a full roll. I use a Spektrum dX6
@deidremiller6099 7 жыл бұрын
I know what I'm doing when I get home from work later! thank you!!
@LeDribFPV 7 жыл бұрын
nice, good luck! Just take your time soldering on such small components :)
@deidremiller6099 7 жыл бұрын
will do!! look forward to hopefully flying together in a couple weeks!!
@LeDribFPV 7 жыл бұрын
hell yeah!
@DRTOLLZ 6 жыл бұрын
I don't own the inductrix but want to do this on my current whoop board. How do you identify which resistors on the board are the correct ones for lvc?
@mikewaterman1905 5 жыл бұрын
I have a question I have a bumblebee whoop Pro ... n can it be bound to the Devo 7 transmitter to fly...n I have four bladed props if I cut to where have two blades would that increase my flight time?
@ZuNunchaku 5 жыл бұрын
well this video made on 2017, now u can adjust on firmware, and e011 board can flash with silverware firmware that allow u to adjust the voltage
@billbergen9169 4 жыл бұрын
Wow! nice.
@leftovercrass5210 6 жыл бұрын
I have the qx65 does it have an LVC? Cause i have the same batteries as those but the HV ones. When i plug the battery in my batt meter drops from 4.2 - 3.7 and keeps sagging and the quad barely flies for 10s... Also. When i begin to lift off the ground the fpv feed cuts in and out until im like a metre off ground Any ideas?
@pierretharreau4862 7 жыл бұрын
ive heard ur using the beebrain, but what about the beecore? is it any different?
@LeDribFPV 7 жыл бұрын
They're similar. They both run betaflight so you should be able to set them up the same. I believe the bee core actually has a faster processor. I think its F3 while the bee brain is F1
@pierretharreau4862 7 жыл бұрын
oh ok, cool thanks for the reply XD you are so inspiring
@WX4CB 7 жыл бұрын
can you post a still picture of the 2 resistors that you need to short out ? I definately need to do this to my stock inductrix fpv board
@jlharv64 7 жыл бұрын
Good job.
@michaelpetale6872 7 жыл бұрын
Great vid le drib! Knowledge is power ah?😜👏👍🥇🍺
@blasbike 7 жыл бұрын
The best mod for TW is JST-PH 2mm connector. That way I got LVC sometimes at 3.67V
@LeDribFPV 7 жыл бұрын
yup. Hoping to do this upgrade soon. Even so, I would still do this LVC inhibitor mod. Don't want to even have the possibility of my whoop dropping out when I don't want it to
@WanderinWizard 7 жыл бұрын
great vid man luv the tiny whoop mod too makes me want to get one😎👍🏻
@nabbsone 7 жыл бұрын
thank you very much my dood
@goober24787 7 жыл бұрын
great! I was starting to wonder if there was a way to bypass that. thanks for the info bro!
@salsabeelvlogs6539 5 жыл бұрын
Sir plZz help me. I'm also facing this problems but my reciver board is different from your. My mini drone is Eachine h8 mini.. Plzzz reply me sir for help
@chaserc3699 7 жыл бұрын
wod this mod work on a eachine e010
@nicolasazar96 3 жыл бұрын
?
@WSWarriorsStew 7 жыл бұрын
I soldered the JST PH 2.0 instead of the common 1.5 and don't have that issue and battery discharges fine 3.6 - 3.7 almost everytime. The thinner wire stock funnels the juice. I figured this one out gifting the family with them cheap furibees then soldering cams myself. With there lil 150mah batterys that come with with the jst ph 2.0 seemed to have good punch versus my blade fpv. Bad part you gotta solder the females onto the batterys to. Furibee however does sell the 250mah lipos with the JST PH connectors, OOo almost forgot 30/60 punch value on them also!
@jclopez12353 7 жыл бұрын
WoundedWing how much flight time do you get?
@DannoKrueger420 4 жыл бұрын
Can you do this mod on an Inductrix BL? Im about to toss the thing. New batteries are getting 1 minute flights. Love your flying drib. Smooth.
@3dprint-tech787 7 жыл бұрын
First! Like your video's a lot! Keep up the good work!
@LeDribFPV 7 жыл бұрын
Thanks!
@sprocket374 7 жыл бұрын
Ahhhh nice mod.
@epoweredrc 7 жыл бұрын
Love all your videos, I don't know what I'm doing wrong but ive tried to solder a blob of solder on those two right over top of them both and its not taking good i guess it looks brown other then silver like yours does and my LVC is still working..
@SnapbackFPV 7 жыл бұрын
want to put one of these together soon. Going to do some research but do these come RTF with with the camera or are they usually customs builds?
@fredjones2841 7 жыл бұрын
both. RTF and Customs are out there.
@OkiFPV 7 жыл бұрын
I saw you doing some whoop flips, so do you fly it acro? or do you use horizon?
@LeDribFPV 7 жыл бұрын
I always fly in acro. Most agree auto-level (angle mode) is better for racing tiny whoops but I hate using it. And Horizon mode (auto-level with flip ability) seems like a bad idea, too easy to push the stick to far and start flipping unexpectedly
@OkiFPV 7 жыл бұрын
Thank you for your insight. Ive never flown horizon either, for exactly the same reason. I have a whoop on the way!
@LeDribFPV 7 жыл бұрын
Great! You'll love it :)
@SanJacinto23 6 жыл бұрын
Make Tiny Whoops Fun Again!
@hawkfpv4950 3 жыл бұрын
how can i do this on my inductrix fpv plus fc board?
@foxman362 7 жыл бұрын
use h107P stock batteries they would fit beta65s tiny whoop models
@yourfathersmellsoffarts3624 7 жыл бұрын
Love this, I am really bad at racing 😂
@dazkillinger1397 3 жыл бұрын
How you do this on stock boardtheredrawg.
Tiny Whoop
Рет қаралды 61 М.