Been using it in Elden Ring to play at 120fps and also in Emulation to turn fps capped games into more smoother experience.

This is an absolute 100% purchase for Modded Skyrim. I have 400+ mods currently with a heavy ENB using an RTX 3090. With heavy scenes, i average 50-70fps. But with Lossless Scaling, i can maintain a constant 100fps since my monitor is 100hz. Lossless Scaling is really amazing imo. My monitor is a 34" Ultrawide at 3440x1440p 100hz

1. Set your game to borderless fullscreen, If this option isn't available, use windowed mode. Exclusive fullscreen won't work. 2. Adjust the scaling settings, Set "Scaling Mode" to "Auto" and "Scaling Type" to "Off" to play at native resolution. 3. Cap your in-game FPS, For DXGI (default), cap it to half your monitor's refresh rate. For WGC and GDI, lock it to a stable framerate. 4. Disable overlays, Overlays from game launchers or GPU software can interfere with Lossless Scaling. 5. Optimize performance, If you're aiming for a specific framerate, consider using the upscaling feature or lowering in-game settings.

Lock the frame rate to 30fps than use 2xLS for a 60hz monitor, see if the results are better, at any resolution

i think you are using it wrong... lossless scaling works the best with a rock solid locked base fps. it is better used to fill those cicles that your hardware can't. let"s say your game does 50 or even 60 but with constant drops to 50 fps, then on a 60hz display you would lock to 30fps with RTSS and apply 2x LSFG for a smooth experience. in the same case but for a 144hz display, then you would lock your base fps to 48 and apply 3x LSFG. locking the base framerate to a half or a 3rd of the refresh of your display is what will give you the best result as locking yoir frames will also reduce input lag to a minimum basically you wil end with 2 frames of input lag, one introduced by RTSS and one by lossless scaling. the tool is amazing when used properly and its best quality is in the options it gives you to reach almost perfect results and eve better than those offered by fs3 and dlss as LS is universal and easy to use.

You showcased the scalleing realy good , but the FG part was kinda messy since you didn't use any framerate cap ingame ( for 120 fps you need to cap the game to 40 for x3 and 60 for x2 )

So first of all there's a few KEY issues with this video and it's obvious that he didn't follow any type of guide. As he's using an Nvidia GPU Gsync does not work it's an nvidia issue not a program issue which means you have to absolutely have to use a frame cap, with AMD freesync does work, so you only need to enable a frame cap if your going over the fps of your monitor. If you don't do this then you get major issues with frame time fluctuating as he experianced here. The gtx1080 is a relatively weak card by todays standard so it is recommended to use Performance mode which can drastically help with FPS. Why is it that any niche product being reviewed by big youtubers are just lazy and don't bother researching anything then saying it's got issues.

Haswell i7, RX 580 8GB and Inspectre + lossless scaling and a gamepad = win?

Played Ghost of Tsushima at 240fps with FG 3x (80fps base) and it was an amazing experience. A wonderful tool for gaming and a must have for PC.

This is definitely a must buy for games with no or poor upscaling i.e. Helldivers 2 Thanks for the test, Bryan!

Tried it, it works. Then I tried my monitors native 1080p to 4k scaling and it looks better... Integer scaling is not sharp and has glitches (1080p to 4k should integerscale without problems)...

Don’t think it was mentioned in the video that you need to set the game display to windowed or borderless for upscale to work properly. I have only learned of this through other vids. Correct me if I’m wrong and I do apologise if I’m wrong. Make the game borderless go back to lossless and press upscale button you then get 5 seconds (you need to enable draw fps in lossless settings as this reads and shows the real fps achieved it will come up behind any fps monitor software that is running as rivatuner does not show the true fps when using lossless upscale ) to click on the game or video you have running and it upscales. I think Brian did it but not explain.

For LSFG to work smoothly, it requires that the base fps is locked, so to get 60 fps from 2x FG, the game should maintain 30 fps throughout

the reason there is artifacting is because lossless scaling only has access to the frames your display outputs and does not inject dlls, it does not have access to the actual game. The FSR 3 frame generation works with no UI artifacting because it is in the games files, so FSR3 can tell the game what to generate frames for.

thanks mate. I really enjoy watching your videos from Economics Analysis to Tutorials. helped me a lot

My favourite aspect of Lossless Scaling, is that the frame generation feature works with emulators. I was playing Conker Live & Reloaded the other day, using the 60fps patch plus FG. So I was able to get up to 120fps.

I love this program. Downloaded it before it was widely known and use it on my 3 GB GTX 1060 works for emulation, PC gaming, movies, so any local video files, works on KZfaq. It is amazing especially if you have a high refresh rate monitor

Been trying this and for the cheap price it seems to work good so far. Its a good option when FSR is not in a game. It cost around 10% of the base framerate to use the frame generation. I believe you are suppose to cap your frames when using Frame gen.

The great thing about this tool is because it's works for every game I try, the performance gain and the increased quality on low resolution of graphic is noticeable without extra files and the complexity to put each files

I use it for videos too since I'm only using a monitor not a tv with the frame interpolation built in its probably not quite as good of a result as svp made specifically for video but it universally supports most videos/software except from drm protected content is a black screen obviously because it thinks your trying to record it since it's capturing the screen to do the fsr sharpening and frame gen. The built in fsr though its quite nice for my monitor because benq didn't put a sharpening setting on this model for some reason

lossless scaling is terrible, i used the 1060 6gb that the steam page recommends, on heavily modded new vegas at 30 fps, losless scaling set gpu usage at 99% and it goes under 30 fps at 28 fps, at fallout 3 without graphics mods i get 58 fps in doors and with lossless scaling it goes at 60 but the crosshair breaks and becomes fuzzy, at far cry 5 i get 60 fps and by turning lossless scaling on either makes no difference or goes to 58 fps but gpu usage reaches 85% instead of 74% and if i lock the fps at 30 and turn on lossless scaling it says 60, but it feels more like 40-45 fps due to lag. Terrible program, fake frames are a joke and a scam.

for "Frame Generation" First you need to lock the FPS from Nvidia's built-in cPanel and make it hard limit at 30 FPS and the from here you can go all the way up to 90 FPS

I'm very excited about stuff like this. Upscaling and frame gen used to be really rare and not accessible for most people. Hearing about new options like this means we can have more options for budget cards in the future

Here we are We get to the Era of "Downloading FPS"

Recently, I purchased this. For my 7800X3D 4090 PC, Frame Generation works great for ArmA 3, which frequently drops to around 50 FPS in multiplayer because the frame rate is tied to server speeds. Sadly, LLS framegen does not work well on my 3050Ti laptop. It seems that when the game is GPU-limited, LLS needs some GPU headroom to do its thing and causes worse results than running the game without frame generation.

I bought this software for 1 dollar about a year ago, and love it so much. I even use it for watching anime, its work.

If 2 of the 3 games you tested didn't benefit from frame generation, it's 66% useless.

This is a great application, when Elden ring first came out my graphic card at the moment is GTX960 2GB, I cannot run it even on 30fps. After using this I can play it at fullscreen and 30fps although the resolution isn't the best.But hey at least I wont be missing out

frame gen's input delay is negligible the only reason it feels so bad is because typically when your fps is higher your input latency is lower however with frame gen the "fps" is higher without the input latency getting lower making it feel much worse then it actually is

You have to take into account that LS framegen does not go over your monitor hertz limit anymore, ie. if you have a 120Hz monitor you'll get the best result with the game capped at 60FPS for X2 or 40FPS for X3. If your game is already rendering enough frames to max your display frequency then LS does not do anything when it comes to framegen.

This is like the 3rd video where there's a couple of flaws explaining how it works The first thing you need to do is cap the fps to half of your monitor hz if you're goint to use X2 and a third if X3 Lets say you want to generate "120" fps Cap the fps to half of your monitor fps (60fps) and then use the software Dont just go and activate the program The inconcistent fps will cause way more defects

It actually works really well in NEW WORLD at 4K!!

Wish my dad played tcg with me growing up! Different times tho I guess. He supported the cost of packs of cards so can’t complain that much 😂 I got 2 packs every Friday if I was good, did my jobs and went to school ahhhh simpler times

I bought it for the launch of the 3X FG option and it has been great. I've tested it on my laptop, desktop and ROG Ally with success. I do agree that results will vary per game but there are so many options to tweak the experience and to get it dialed in per game once you get used to the settings.

I've heard some people call this a scam. Must've been a case where they tried it in their favorite game. Didn't work too well but didn't try any other game before making a conclusion. Ya like you said it's hit or miss. For campaign games like Alan Wake 2 it works well. For competitive esports probably not really.

Have you tried AMD's Adrenaline intelligent adviser? I might have the name wrong but I toggled it and was getting 120 fps on the performance setting on Elden Ring. I've since put it on the global setting for 60 fps but it surprised me for a moment.

Man, to achieve the best results you should cap the game at 30fps and then turn on framegen.

It's a must on Elden Ring (capped at 60fps)

Dlss enabler is the best frame gen program/mod for dlss3 games with older gpus, also been enjoying lsfg for videos, keep up the great work as always, been enjoying that tech yes city bang for buck bangers for many years now!

I do have a question, when I use LSFG 2.1 and 3.1 I have this issue where it's almost like the most delayed of version of motion blur ever and I don't have VRR enabled on my monitor nor' my AMD Radeon settings. But I cannot NOT use LSFG because that's practically the entire point of me buying the application. So if any of you great people can help me it'll be greatly appreciated. (P.S I have a 170 Hertz monitor and I use LSFG 2.1 and I capped my FPS in RTSS to 85 and my pain is still constant.)

Made Helldivers 2 experience much better. One of the best 7 euros i've ever spent on software

I spent the full $7 on it and its awesome. I definitely want lossless to get the full $$. It works great for the universality. Better than amds afmf by a landslide.

I really like the 2x frame gen for games that don't natively support frame generation or upscaling and also have an in-game frame cap. The Crew 2 is a great example of that. I've been on the lookout for mods to fix the 60 FPS frame cap for a while now. Now I can finally play at 120 FPS! Don't really notice any input delay with antilag enabled on my RX 5700. (3x doesn't work at all for it though lol)

it needs atleast 20-40% gpu usage space in order for it to work properly..

It's 100% worth it I can play native 4k 165hz in most of my games now with my i5-7400 and 2060s

I feel like I did this for years when i connected my PC to my 3d TV and enabled 120hz motion smoothing.

3x framegen is messy. Dont use more than 2x, its plenty

Lossless scaling is an absolute game changer it's given my 3080 a couple more years of life if not more.

Amazing video. Does it have native anti aliasing solutions like dlaa and native aa fsr or their own native anti aliasing vs Temporal anti aliasing?

🦆 is adorable. This sounds look a neat testing tool. I remember playing Pokemon TCG offline, great GBA game too. Those cards do look a bit not as sharp/bold text as they should be or something, in a live game that could be annoying. Could see this LS1 for older graphics cards perhaps. I use FSR if I have to.

Thanks for the review. I really wanted this software just for the frame gen as i am already running most of my games with DLSS so if fg here is not good, i better stuck to mods for FG.

Use base cases lol 2:30 mark. Great video though

Do you have to keep lossless running in order to keep the upscale

love the Tshirt! (GR fan also :)

I bought it and i dont get a SINGLE EXTRA FRAMES.. waated money.. with 4070 Ti and i9-10900k plis 32 ram

I know many says it doesn't trigger any anti-cheat... but still hope that it doesn't in future games xD

This software is best for games where you don't have enough fps or where Upscaling with fsr or dlss is poorly implemented and the game looks worse than Native AA when using FSR and DLSS, I used it with Horizon Forbidden West since upscaling options in that game all look bad compared to native TAA so Lossless scaling lets me run the game at default 1440p capped at 30fps on my 2080 using the x2 option and the game looks amazing and runs smooth.

If i have 180hz what do i cap mine to

Any application software that gives gamers more options for fps in games is worth having imo 🥰💪😇🥳. Good on this creator for creating a great application for such a good price 🤤😁😇👍

VRR is a legacy feature and doesn't work. It literally says it when you hover on that option.

40fps gen to 80 or 120 is the sweet spot imo.

That's why I recommend 66fps before enabling any GF technology

4:20 I kept trying to close the Epic Notifications LOL

This is great for emulation. Even better than unlocking fps is some cases.

How much latency added for ls fg vs fsr 3.0 in ms same game and situation i hope you test it with different mode like ls fg 1.1 and dxgi wgc gdi which lowlest latency ms thank you :)

It would work to use loseless or trixx and FSR3 together ?

Can u try the artic 36 cooler? do the ryzen 7 5700x if u can

The upscaling is straight up bad for me. i only use the framegen

Is it safe to use on online games tho? Like, can we get banned by using it?

My RTX 3050 might need this?

The frame generation isn't worth it more often than not. There's a massive fps drop and if you're lucky might get +10-20 fps compared to what you natively get. On several titles I even got less overall fps. The minimal gain in total frames isn't worth the added latency and artifacts. If you can manage 60 real frames with it, then i can see it being beneficial, but it seems like a novelty in most real world applications.

This is the closest we will get to magic

Good with laptop eGPU setups Especially if use laptop screen as you can run LS on the iGPU while game runs on eGPU. I use it with me zenbook + GPD-G1 and love it as I can play things like Cyberpunk and Starfield that otherwise are unplayable.

Bought it a week ago. It’s great.

Doesn’t amd have this for their cards Like fluid motion or something like that

Why are you testing it on games that already have built in upscaling? Why not try it on some unoptimized titles that don't have any at all? I'm gonna try this on Gas Station Simulator (don't judge 😅) because that game is an unoptimized mess and stutters like crazy!

Will this be useful for someone who plays on a 1080p 144hz monitor on an old pc with i5 4690K + 1060 6GB?

Ive tried it and FG doesnt not work! lmao and if it does work , then its hella choppy and it feels even worser than native. really bad

Can i use this on intel hd 5500.

I hope to develop and add a technology similar to dlss or fsr based on Ai

Would this help if someone is using an i7 12th gen, LG C2 4K display, and a 3090 Ti?

VRR is not supported.

4mb? that could take a while

VRR doesnt work btw if u over the mouse over it u get a text box

chinese gpu MOORE THREADS MTT S80 making a comeback with this and fsr 3.1

I don't get it all gpu manufacturers offer upscales that are ideal for your hardware, what value does this add?

its smooth but the lag/delay.

Now..... will the tool run on linux?

Can loseless scaling work with capped fps???

Does this work with any gpu?

Will it work for a gt 710

Gt4 PS2 to 4k +120fps😅

i pirated this sofware god forgive me if i had the money i will buy this sofware

This fake frame bs needs to stop you can't make 30fps feel like 60

Does this work on Linux?

Neat! 👍

Whats the outro song

Tech YES City - How I use this Powerful channel full of free videos for more FPS on my Gaming PC

Interesting, but between me and my daughters I've given Steam enough money over the last 20+ years to cough up five more dollars for this...besides, we have higher end cards.

it's an injector so it can get you banned from multiplayer games