New DBXL 2.0 review of new parts and problems iv had. Thanks for watching!! #5thscale #losi #dbxl
Пікірлер: 57
@phrogusmc9 ай бұрын
I had the OG DBXL with the 23cc engine many years ago. I got it off eBay with less than a tank ran through it and several upgrades, including a tuned pipe, upgraded turnbuckles, and a NIB 29cc "Big Bore" kit. Running alongside my buddie's stock 5ive-T and the DBXL was slow. After installing the Big Bore kit, the engine really woke up and it was a screamer. I'm sure these new ones with the even larger displacement are a blast.
@rcshowoff54278 ай бұрын
Hello. Yes the power on this is great after I installed the pipe. Woke this 32cc right up but did find it a little sluggish with the stock muffler. Thanks for watching and commenting.
@bransonbasher6534 Жыл бұрын
Color coordinating your clothes with the RC is going all in lol. Keep being awesome!
@rcshowoff5427 Жыл бұрын
Thank you!!!
@TrungPhanViet2 жыл бұрын
That skeleton is an awesome addition. I want one for my DBXL too.
@rcshowoff54272 жыл бұрын
Thank you!! Took me a while to get it to fit but it was worth it.
@CZ-kz7ug2 жыл бұрын
That was a great video! Congratulations on the awesome purchase!
@rcshowoff54272 жыл бұрын
Thank you much!! So happy I brought this.
@JonnyJetson7542 жыл бұрын
Awesome man! You should do a video Racing along with the cars thru the field as they pass by 🚗💨🤘
@rcshowoff54272 жыл бұрын
Thank you!! I will do that and a speed run on my next video with the DBXL. Great Idea thanks!
@JonnyJetson7542 жыл бұрын
Heck yea that would be a sweet video!
@islandrc-duke19722 жыл бұрын
cool rc and awesome run,sounds great
@rcshowoff54272 жыл бұрын
Thank you Duke Appreciate it!
@voneboy2 жыл бұрын
Love these Magnaflow layout,Magnaflow makes some very nice exhaust systems ,I“ve actually run one on my 1:1 hobby car😅 However ,the losi seems to have a really nice handling,like it and your drive spot is a dream!! Thanks for these awesome footage bro 👊😎 It would be epic to let drive my Fg Monster together with your Losi on this epic gras field man…A big like 👍👍👍
@rcshowoff54272 жыл бұрын
Thank you very much! I happen to be lucky I have a lot of parks and big fields to run in. This does handle great way way better than my Baja. Thanks so much for watching.
@voneboy2 жыл бұрын
@@rcshowoff5427 in fact it seems to be a very nice place where you are living 😄 especially for rc guys like us✌️ I’m really often play with thoughts to move one day to the USA 😍 Today the weather here is crap, so I will try finally to finish my Savage project 👊😎 The skull on the Losi fits perfectly and looks really amazing,well done my dude😀
@rcshowoff54272 жыл бұрын
It's nice to talk to someone on the other side of the world. It does seem we share the same rainy weather must be global warming or some garbage like that. It would be awesome to run RCs together but at least we have youtube for that. Thanks again can't wait to see more of your videos.
@voneboy2 жыл бұрын
@@rcshowoff5427 Yeah!One of the advantages of KZfaq is the the possibility to share our hobby with people over the whole world! However…Never say never…Perhaps one day we have the possibility to rip together exactly on this beautiful Gras field… Even the Covid have put me in some troubles in respect of my future job as an airline pilot,I haven’t give it up and still hope that I’m able to finish my license and get a job on the cockpit even it will take a little longer than expected lol…Sh*t happens…The main thing is how you’re manage your way in order to counteract it bro 👊😎 Anyway,it’s great to meet people who loves the same stuff as me via KZfaq!I guess this is one of the main motivations for me tobkeep making videos of mine rc models…Let’s hope that a good friend of mine is able to fix my computer ✌️
@patjacobs9616 Жыл бұрын
I don't get it. Body is sponsored by magnaflow but they don't make a pip for it???
@rcshowoff5427 Жыл бұрын
Good point. Now other companies are making all sorts of pipes for it but the are so expensive.
@user-lc3rx8ub9c4 ай бұрын
❤
@NitroFreak2 жыл бұрын
bartalone racing makes a performance pipe for that its on daves discount motors take a look
@rcshowoff54272 жыл бұрын
I'll take a look thanks.
@jdpasltrains2 жыл бұрын
Bada$$
@rcshowoff54272 жыл бұрын
Thank you!! I don't know if you remember but a while back you ask me to get one. Now I'm happy I did.
@jdpasltrains2 жыл бұрын
@@rcshowoff5427 you are lucky to have it lol
@GoFastRC2 жыл бұрын
Car looks like so much fun to drive! Makin me want one. And for $60 bucks that pipe didnt seem half bad. Been wantong to buy a 5t 2.0 to take to the track and bash. Definitely going to have to save for that bad boy though.
@rcshowoff54272 жыл бұрын
Definitely a lot off fun. Actually I'm very happy with this pipe. There's no way I'm spending $250 on a pipe. I rather spend that on keeping all my RCs up and running. I was going to get the 5ivet but I liked the look of the DBXL better. Thanks for watching l hope you can get one soon.
@simpleweldingservices527 Жыл бұрын
some hobby stores will let you do layaway
@SRC222 жыл бұрын
Nice
@rcshowoff54272 жыл бұрын
Thank you!
@TonyTony-tk4qf2 жыл бұрын
👍👍👍👌
@venturelyfe2 жыл бұрын
👍🏾👍🏾
@rcmtb1052 Жыл бұрын
Finally found this pipe on your channel. Would you recommend this? Did you increase any performance and are this easy to install? Tia❤
@rcshowoff5427 Жыл бұрын
I do recommend this pipe. Yes it did make more power and let's the RPM rev to its potential. Fairly easy to install l just had to extend the 1 tab that I show at the beginning of the video to get better fitment.
@johnrcuk21442 жыл бұрын
Great rip buddy, I have the same buggy and had to Threadlock everything even the grub screws on all driveshafts as one came out and the pin moved and destroyed the wheel hub, Where did you get your skeleton please
@rcshowoff54272 жыл бұрын
Thank you!! Sure you will agree for the price screws and pins shouldn't be backing out. I had the skeleton it's 12in tall. Had to do a bit of cutting and trimming to get it to fit. Sure you can find one on Ebay or Amazon. Thank you for watching and commenting.
@johnrcuk21442 жыл бұрын
@@rcshowoff5427 I’ve found one now on Amazon, I agree but it’s all up and running now ,
@simpleweldingservices527 Жыл бұрын
do you have the link to that pipe
@rcshowoff5427 Жыл бұрын
I used to have the link. I can't find it now...I left an Ebay link on another comment a while back. I always check Ebay and Amazon and it alway sold out. It is a really good pipe and it's cheap I think that is why it's always sold out. Sorry I couldn't be more of a help.
@RFHX2_6.0 Жыл бұрын
Any clearance issues with the pipe hitting the cage or anything else?
@rcshowoff5427 Жыл бұрын
It did touch one part of the cage.l dremmeled a little notch and wrapped it with aluminum tape. Very easy and no other clearance issues. Been running this pipe for a month now and I think it's great and worth the price
@alanmeyers3957 Жыл бұрын
Do you by any chance ride a Harley? Holy blipping the throttle, nice car though 👍
@rcshowoff5427 Жыл бұрын
No Harley. I was a Motocross racer and Streetbike stunter years ago and now l enjoy nitro so burping the throttle is habit
@felixdahousecat53319 ай бұрын
Does that pipe burn or melt anything?
@rcshowoff54279 ай бұрын
No but had to shave off some plastic above the pipe. Other wise all good doesn't burn anything.
@jasonbowen2960 Жыл бұрын
Does it have reverse?
@rcshowoff5427 Жыл бұрын
No it doesn't.
@Rcguy2591 Жыл бұрын
You can’t use lock tight on plastic
@rcshowoff5427 Жыл бұрын
Well you can it's worked for me in a bind. I do use a special thread lock called Zap l specifically talk about it in this video. It's for plastic.
@Rcguy2591 Жыл бұрын
Do you have a link for the pipe?
@rcshowoff5427 Жыл бұрын
@@Rcguy2591 l did but it been almost a year and the link I had isn't working. Amazon and Ebay search dbxl pipe if someone has it in stock it should show up. It is a no name pipe in chrome.
@craiggarrett44617 ай бұрын
Can you send me the link to the pipe
@rcshowoff54277 ай бұрын
Hello...l did have link for Amazon but it's been over a year and l think its gone now can't find it. If you check some other comments l had some links put in for the same question.
@edwinlacayo1047 Жыл бұрын
No jumps
@rcshowoff5427 Жыл бұрын
Sorry.. This is a car I promised myself I wouldn't beat it up to much.
@edwinlacayo1047 Жыл бұрын
I buy the magnaflow put the pipe and chassis protectors and believe me always land hard.......its not for jumps i think