Losi DBXL 32cc First Start & Finishing the Installation ( break in time )

Рет қаралды 2,004

Earl Moorhead

2 жыл бұрын

Help support the channel merch Hoodies
www.ebay.com/itm/154709237762

Пікірлер: 82

@RON4RC 2 жыл бұрын

Looking forward to you running this Earl looks and sounds awesome... That bolt on the exhaust would have tortured me I feel your pain man..... What a fantastic swap over....it looked very impressive. 😁

@spike-- 2 жыл бұрын

55° in Wisconsin today👍. Had a rain to wash away the salt. 2 pak limitless run. Love it with the 18/50 gearing. Thanks again Earl.

@earlmoorhead5555 2 жыл бұрын

Thanks 🙏

@jbproofbeaman76 2 жыл бұрын

You will love that new pipe

@michaelvankirk3576 2 жыл бұрын

Great video Earl 💯👍🛠️

@dirty_c5573 2 жыл бұрын

Definitely put a spring on the pipe, once it heat cycles it will be loose and rattle apart. I would get rid of the bolts and put studs in the head.

@soundmindtv2911 2 жыл бұрын

Sounds tough!! It would be torture letting it sit and idle so long, lol. I know it’s gotta be done, but it’s like a kid trying to sleep the night before Christmas! 😂

@earlmoorhead5555 2 жыл бұрын

Right 🤪🤪

@Ryan-gf3jf 2 жыл бұрын

Great Vid! For the pipe i have the brovan side pipe from bartolone same problem. I just got a allen wrench and cut it to size makes it alot easier!

@davidpanto9346 2 жыл бұрын

Sounds great, real aggressive.

@bucksrcs1583 2 жыл бұрын

Love it buddy I knw u'll have fun with that. Thanks for sharing 💯

@jimmygeorge3582 2 жыл бұрын

EARL…. check your air cleaner,,,,I thought I saw it spin around when you first started to start it,,,,🇺🇸👈🚘

@earlmoorhead5555 2 жыл бұрын

Yes sir cleaner is never tight if you tighten it it gets crushed down silly design

@gamechangerrc4633 2 жыл бұрын

looks great Earl👊👊💯💯

@petekobraoutdoors7324 2 жыл бұрын

NICE, can't wait to see it rip up the grass, OH YA ! KEEP ON BASHING, OR RACEING! FROM BARRIE ONTARIO CANADA

@earlmoorhead5555 2 жыл бұрын

Thanks 🙏 appreciate the support

@robertobassi1843 2 жыл бұрын

Saranno contenti i tuoi vicini di casa

@KalsRcAdventures 2 жыл бұрын

Sounds she rips. Can't wait to see her run 💪💯

@earlmoorhead5555 2 жыл бұрын

I hope so 💨💨

@darrellwright3105 2 жыл бұрын

Definitely gets a 10 for the cool factor! 👍

@earlmoorhead5555 2 жыл бұрын

Thanks

@jonvoogd511 2 жыл бұрын

Break in can be a pain I wish I saw this last year 😪 this video would have saved me a couple of trips to my local hobby shop 🙃. You know your stuff definitely. Waiting for the next video brother!💯💥

@earlmoorhead5555 2 жыл бұрын

Appreciate that 💨🙏

@monsterrc1681 2 жыл бұрын

Nice earl

@jbproofbeaman76 2 жыл бұрын

The header is better with a stud kit that way you have nuts makes it easier to tighten up the header

@earlmoorhead5555 2 жыл бұрын

Yes it would have been easier

@jbproofbeaman76 2 жыл бұрын

I would put more filter protection on I have heared the K&N filter will let fine dirt in your motor

@earlmoorhead5555 2 жыл бұрын

Yes unless you oil them like the K&N instructions say to do most ppl leave them dry as they clogg easy that way but definitely needs outter wear in heavy dirt runs 👍👍

@Rc-ho4sv 2 жыл бұрын

After break in my 23cc 5b would always start first pull . Even in cold . Miss the smell of pump gas burning 🥵🤣

@earlmoorhead5555 2 жыл бұрын

Yes 👍👍

@SebastianLong 2 жыл бұрын

2:50 What i did to install that bolt was cut about an inch of an allen key (forget what size it is, think it was 5mm) and just use a small wrench on it. Many exhausts are set up like that for the big stuff. Including my Victory pipe. There should be a spring pulling the pipe snuggly into the rubber grommet coming off the header. The third screw under the high and low speed needle is idle control. The throttle should be fully closed when starting and adjusting the fuel ratio.

@earlmoorhead5555 2 жыл бұрын

Can’t close the idle screw when it’s not tuned right when starting or you’ll be pulling the string rope all day & as it heats up the tune changes so adding throttle allows it to run long enough to get things set up properly without having to struggle so much in my eyes 👍👍

@ShadeTree_RC 2 жыл бұрын

that thing is gon be a brute 😎

@earlmoorhead5555 2 жыл бұрын

I hope so 💨💨

@chucksmith155 2 жыл бұрын

I had the same problem with one of my mufflers not on this motor but I ended up using nuts and lock washer and works great I love your set up it’s awesome

@C_J_Edit_z 2 жыл бұрын

Love it it sounds good 😍 can’t wait to see it rip🔥!!!

@KC_2112 2 жыл бұрын

I replaced the hex bolts on mine to bolts with heads that I can tighten with a wrench. I have no idea what they were thinking designing it like that so you can’t get a hex wrench to work on it.

@earlmoorhead5555 2 жыл бұрын

Right add a stud or change the bolt but don’t ship it like this we all have a way to get it to work but at this price it should work 👍💯

@KC_2112 2 жыл бұрын

@@earlmoorhead5555 exactly

@jessekormick3796 2 жыл бұрын

Man you a bad ass!!!! ( Killer)

@earlmoorhead5555 2 жыл бұрын

Thanks 🙏

@cyclonerc1625 2 жыл бұрын

That looked like a pain in the kester. Thank God for vise grips. man that sounds good. Looking awesome Earl. 👍💯🔥👊✌

@earlmoorhead5555 2 жыл бұрын

Thanks 🙏 header was a pain for sure 🤪

@chefbeardsly 2 жыл бұрын

dude that awesome cant wait to see it rip man!

@earlmoorhead5555 2 жыл бұрын

Really easy swap 👍👍

@chefbeardsly 2 жыл бұрын

@@earlmoorhead5555 yeah man I need to get me an engine

@earlmoorhead5555 2 жыл бұрын

Nitro freak said he had 1 🤷🏻‍♂️

@pitbullrcltd6252 2 жыл бұрын

And another awesome production from Yoda’s RC speed shop… sounds like a winner Earl…… can’t wait to see the inaugural first run with the new power plant …..💯👍🏻

@earlmoorhead5555 2 жыл бұрын

🤪😂😂

@pitbullrcltd6252 2 жыл бұрын

@@earlmoorhead5555 💯👍🏻😎

@nofreerides7033 2 жыл бұрын

Yeah you could have bought the new one but more satisfaction in the build itself 👍👍👍

@earlmoorhead5555 2 жыл бұрын

Yes then I’ll end up with 4 of the same platforms seems like I’m out of room already definitely love builds better 💯💯

@nofreerides7033 2 жыл бұрын

@@earlmoorhead5555 we enjoy watching them 👍👍👍

@NitroFreak 2 жыл бұрын

good vid earl yes you need a spring for that exhaust on your bolts we normaly cut an allen wreanch down to fit its common very bad design sounds like u got it figured out nice job

@lottiecooper609 2 жыл бұрын

This is what losi gets when they decided not to hire a professional such as yourself!!! What a crappy design, especially if someone is a rookie, and doesn't have any experience!! Thanks for helping a lot of people!!

@idontlikemyusername8627 3 ай бұрын

What is a good hand pump or electric pump to get? love the videos. Also is the fuel you used the Trick 110?

@reapersrcperformance8835 2 жыл бұрын

Get an elen key and cut it down to size and you'll be done with all that hassle I had the same issue

@reapersrcperformance8835 2 жыл бұрын

I deal with lots of 5th scale cars hope that helps

@reapersrcperformance8835 2 жыл бұрын

Not only that but your going to have to upgrade your motor mount ones you start playing with it cause there out of plastic and they wear pretty fast

@dajaduke1936 2 жыл бұрын

Earl can you find out about that spring. I was told it came with the pipe by Amain. I want to purchase the new model but need to know what to order. Thanks DAJA

@earlmoorhead5555 2 жыл бұрын

I’m trying to find out have to wait till there open

@rcguygarage 2 жыл бұрын

WOW FIRST AGAIN

@earlmoorhead5555 2 жыл бұрын

Notification squad 💯💨💨

@westtxgreg 2 жыл бұрын

Ready to see it rip now. Is the spur gear bent l? Seemed a bit wonky when you were checking the brakes. Did that pipe come with springs to hold the two halves tight together?

@earlmoorhead5555 2 жыл бұрын

Yes it’s bent 😱

@never-stock-rc2968 2 жыл бұрын

Where is your exhaust spring Earl?

@earlmoorhead5555 2 жыл бұрын

Couldn’t tell you wasn’t in the kit

@rcguygarage 2 жыл бұрын

😜😂🤣😛

@chucksmith155 2 жыл бұрын

What are you using for a temp gun the one you have is a lot smaller that the one I use but I think it’s a lot older than yours thanks

@earlmoorhead5555 2 жыл бұрын

I picked it up at home depo 👍👍

@diytypeofguy6502 2 жыл бұрын

Needs to be richer Ur gonna kill pullstarts yanking it like that

@earlmoorhead5555 2 жыл бұрын

10 years I’ve never broke one yet 🤔

@HBFTimmahh 2 жыл бұрын

you dont tune a 2 stroke by smoke out of the pipe. You tune a 2 stroke by plug color. You want a medium tan/caramel color. any lighter in color like a beige is too lean. any darker than caramel is too rich. If you try to break in a 2 stroke like a nitro, you'll fuck up the rings and shorten the life and weaken the power band of the 2 stroke. Need to Seat that Ring. that is what break in on a gasser consists of. That requires RPMS, A GOOD BIT OF them. well past 1/2 throttle. Just don't run it WOT for the first tank and well tuned getting into the 2nd tank you can hold WOT for whatever. but in the 1st tank, a gasser NEEDS to be brought Up to WOT and just not held there. Need to create that case pressure. In the time it took me to type this, I can tell its been idling for too long.

@earlmoorhead5555 2 жыл бұрын

Can’t read a plug idling tho 🤷🏻‍♂️

@HBFTimmahh 2 жыл бұрын

@@earlmoorhead5555 First run you just tune for a good idle rpm, and not too rich on the L so it doesn't fall on its face. Tune the high needle to it gets up in rpms fast and not too rich. not too lean. will only take about 3-5 minutes to get color developing on the plug to start reading colors. Had a 26cc Reed Case ESP motor built for my Hooters Baja back in 2010ish, and had it running tuned up and making laps by the end of the 1st tank. 2nd tank was just letting it rip, leaving it just a bit rich. Had about 1000 into that motor. We stuck in on the Dyno at the end of the 2nd tank and was getting 6.8ish HP and 4.3ish ft lbs of torque at 14,800 rpms. Top rpm was just over 19,000. Don't be afraid to put some hammers on that motor and build up case pressure. It will thank you for it my man. Just no LONG TERM WOTs in the 1st tank. got up to WOT, just don't pin it and hold it there.

@cyclonerc1625 2 жыл бұрын

First 🤪

@earlmoorhead5555 2 жыл бұрын

Notification squad 🔥🔥

@diytypeofguy6502 2 жыл бұрын

Air filter, those tires are garbage change those

@earlmoorhead5555 2 жыл бұрын

There old for sure