Losi DBXLE 2.0 New owners upgrade guide, gearing,servo, chassie supports and more with Castle XLX2

Рет қаралды 32,174

Күн бұрын

hey everyone I see a ton of new post about upgrading the dbxle 2.0 on the FB groups. The buggy has exploded in popularity over the holidays and I had a few people ask me to make an upgrade video . Soo I thought I would take a few mins and make a short video on basic upgrades with links on where to get the parts. check it out and please Subscribe to help support the channel. Thanks!!!
*UPDATE*! My apologies I clipped out the video where I discussed the fan setup. You don't need to spend over 100 bucks on a crazy fan setup. im running a 13 dollar castle fan shroud with two 1.2 amp server fans underneath it. the fans are $9 bucks each and keep this motor super cool. I can run the car on 100F summer California days without issue. if there is enough interest I can make a fan video anyhow here is the link to the fans, my apologizes for not including it in the video.
www.ebay.com/itm/152733107281
A few things I forgot to mention in the video I feel I should mention include removing and adding loctitie to all screws going through the chassie into metal.. this is crucial as alot of users have reported screws being barely hand tight right out of the box.. I also recommend changing the button head type motor mount screws to socket cap screws. These give more surface area for your hex driver to grab and decrease the chance of stripping the heads.
I also forgot to mention upgrading the axles and drive cups.The front cvds need locktite added to the pins or dog bones some people call them. If you didn't do this and you break a front axle like I did FLM makes forever cvd drive cups and axle kit for the front. we have them on this car and haven't had a single issue since installing them. those can be found here www.davesmotors.com/fastlane-...
here are links for upgrade parts discussed in the video.
tires/wheels MX43 badlands: you need to order 2 sets
www.amainhobbies.com/proline-...
wheel extenders DGI v2:
www.ebay.com/itm/291724128683
Servo: Hitec DW845wp
www.amainhobbies.com/hitec-d8...
DGI steering links, order 2
www.davesmotors.com/DGI-Racin...
Castle XLX2/1100kv combo
www.amainhobbies.com/castle-c...
18T gds pinion
• Losi DBXLE 2.0 New own...
Batteries, order 2
www.smc-racing.com/index.php?...
angle and demon hd 3.0 springs
www.ebay.co.uk/itm/254701909731
shock covers
www.ebay.com/itm/153861204920
battery/charge lead connectors
www.offshoreelectrics.com/pro...
Chassie upgrade parts
www.amainhobbies.com/losi-dbx...
www.amainhobbies.com/losi-dbx...
www.amainhobbies.com/losi-dbx...
spindle carriers
www.amainhobbies.com/losi-dbx...
servo saver
www.towerhobbies.com/product/...
Tools
step bits
www.amazon.com/dp/B002LRLVRQ/...
Mip drivers
www.amazon.com/dp/B00D7DK0NY/...
www.amazon.com/dp/B0006N72O8/...
thanks for watching guys. please Subscribe if the video helped you out.
#dbxle2
#dbxle
#dbxl
#losi

Пікірлер: 227

@jdodds1023 3 жыл бұрын

I got my dbxle when it first arrived a few years back...Have always been impressed with how it behaves in the air.... Its just seems to want to fly up and its totally controllable compared to the 5T & 5B

@SteelCityRC 3 жыл бұрын

Sweet buggy man! You have the upgrades where needed. Great job and thanks for sharing!!

@Mr.Wednesday. Жыл бұрын

Great vid dude, just ordered the 2.0 and needed someone that’s driven this thing a lot to give some solid advice. Going with all of your advice, 100%

@RCKYOTA Жыл бұрын

Thank you, glad it helped . Dbxle is a awesome platform you will love it

@AdventureTimeRC 3 жыл бұрын

Awesome information I just got the v1 version and knew nothing about this platform really covered everything i needed to know

@RCKYOTA 3 жыл бұрын

Glad It helped !

@aaronclose2325 3 жыл бұрын

Thank you for the info. It’s a great help! 👍🏽

@RonJohnsonaquatics 3 жыл бұрын

Best video I have seen so far a lot of great information now I want to buy one. Thank you

@RCKYOTA 3 жыл бұрын

Thanks Ron, if you need help feel free to ask

@Marko_Radojcic Жыл бұрын

Very informative, thanks for sharing your knowledge

@reapersrcperformance8835 Жыл бұрын

Man this video was awesome, I really learned alot ,thanks man !!😊

@Choprcs 3 жыл бұрын

Well done my friend I remember you from Facebook great info

@BIGGBULLxxx 3 жыл бұрын

Thanks bro.... you got your stuff together 👍👍

@smokinrc5105 3 жыл бұрын

Awesome man, very helpful! Let's see a bearing change video lol!!

@RCKYOTA 3 жыл бұрын

Which bearings where you looking for ? I did the center diff recently

@smokinrc5105 3 жыл бұрын

@@RCKYOTA front/ rear

@animalpix13 Жыл бұрын

WOW MAN you solved a lot of my problems

@RCKYOTA Жыл бұрын

Glad it helped

@RichardUttingSharpshootingUK 3 жыл бұрын

Golden info thanks man

@dmkolb1977 3 жыл бұрын

This is the video I have been searching for. Thank you and now subscribed for more DBXL-E 2.0 updates.

@aftermathmotomxrc Жыл бұрын

Did you buy one of these DBXLE 2.0 ?

@aftermathmotomxrc Жыл бұрын

I am 99% there on buying

@marioskalogeropoulos7054 3 жыл бұрын

i'm a ww2 warbird guy with p47 on kolm 77v4(the last 5 months) and a DBXLE V2 WITH- SAME HITEC servo and MX43 wheels,a bit biger motor pinion and friendly advice to everyone.... take it apart change diff oils(or not yout terain) chek the oil on shoks and use blue locktite with hand tools! what can i say about this vid? just watch it and nice day! !

@maximx963 2 жыл бұрын

What a nice RC car. I have already subscribed to you

@RCKYOTA 2 жыл бұрын

Thank you !

@imjusts0medude 3 жыл бұрын

Yea dude this is THE tutorial...thanks a ton!

@RCKYOTA 3 жыл бұрын

Thank you for liking it ! Plz sub and share it

@imjusts0medude 3 жыл бұрын

@@RCKYOTA did and did, I just ripped the tread off one of my wheels (it's only a few days out of the box) so I particularly liked the wheel and extension upgrade.

@imjusts0medude 3 жыл бұрын

@@RCKYOTA bro so I got the mx wheels and they don't rub anywhere, I got the wheel extensions anyway but the nut for the factory hub doesn't fit on the dgi extensions...any ideas?

@RCKYOTA 3 жыл бұрын

Dgi also makes a nut I've seen some.kits not come with it . Which is weird but ya you need to get the dgi wheel nuts I have them on this video

@ronotardo 2 жыл бұрын

excellent video,

@RCKYOTA 2 жыл бұрын

Thanks !

@mikeinvegas1 3 жыл бұрын

Great video. I have a beefed up kraton 8s same setup.. im on fence on getting one of these..wondering if platform too close. Lol. Looks nice. I have an extra max 5 esc and a 2028 800kv motor. Just looking for something to put it in .lol..i subbed. Very well done video!

@RCKYOTA 3 жыл бұрын

I think you would really enjoy this car. Its stability at high speed offroad is great, when you jump it they just sail through the air nice and smooth. Max5/2028 would be a great upgrade for this buggy.

@Blueknight1960 3 жыл бұрын

Well here's the upgrades I have done to mine. 1) Max 5 esc 2) Leopard 58113 1050kv motor 3) 8mm connectors 4) aluminum diff housings front and rear 5) Aluminum steering knuckle, caster hub and rear hub carriers 6) Complete set of fast eddies bearings 7) 17t pinion 8) Pro-line badlands mx43's 9) 20 mil center diff fluid, 500k diff fluid front and rear 10) Hub extenders 11) Stiffer shock springs I think that's it.

@RCKYOTA 3 жыл бұрын

Nice , how you like it?

@Blueknight1960 3 жыл бұрын

@@RCKYOTA I'm loving it. The leopard motor has tons of power and with the 17t pinion, it's become a wheelie king, of course the max 5 and 200 amps helps also. Guess the next upgrade needs to be a wheelie bar. Hopefully within the next few days I can get a speed run in. With the stock setup, I got 43 mph, it is much, much faster now.

@never-stock-rc2968 2 жыл бұрын

The xlx2 is nasty I just got mine in the mail yesterday for my exb kraton .

@RCKYOTA 2 жыл бұрын

Awesome man that sucker is going to FLY!

@Mason-to9fv 3 жыл бұрын

Nice job

@lifeonmars2971 Жыл бұрын

Awesome video! You explained a lot. I've learned so much about the buggy the past week. And your videos have helped me with a lot of confusion I had. Wish I knew about the batteries! Besides the batteries..is upgrading the pinion and adding a fan good enough? Not trying to be a pro..just want to play. I did upgrade my servo to a savox

@RCKYOTA Жыл бұрын

Thank you, yes a pinion and motor fans is plenty when you first start out . You can always upgrade the esc if it's running hot later

@noahthegildedone5917 3 жыл бұрын

Thank you!

@jimmyrodriguez7235 3 жыл бұрын

Great video. Getting ready to buy one. I've watched your video twice you never mentioned anything about the diff fluids. Did you upgrade your?

@RCKYOTA 3 жыл бұрын

Thanks man,, I run stock fluid in there. I feel like alot of people that swap out diff fluids blow bearings out . It's a pretty heavy buggy you don't need to lock the center diff. I've had this car almost a year now no issues with any bearings or diffs.

@monroethegreat7539 3 жыл бұрын

Hey Shawn have you ever thought about getting a Wheelie Bar for your DBXL-E?, I just put a 1100kv with 17T pinion gear in mine i cant keep this thing on the ground its a beast.

@RCKYOTA 3 жыл бұрын

What center diff fluid are you running?

@giopirmisashvili5514 Жыл бұрын

Thank you

@davidkill2725 3 жыл бұрын

Shawn I have the same setup but with different gearing and yes SMC are great I actually been drag racing with mind more than off road and I have won so many races I nickname mind BULLDOG becuz its so much bigger than any car or truck that lineup with me before I whoop’em I’m going to buy foams tires for the summer

@RCKYOTA 3 жыл бұрын

That's awesome ! Yea man people are shocked at how fast you can get these things to go. For a 5th scale it scoots like a 10th scale

@reginalddurant7854 3 жыл бұрын

How fast you going

@kmacks30 2 жыл бұрын

So what battery would be best for a stock truck? Thanks

@benjaminmaule2422 3 жыл бұрын

Hello Shawn, great video you’ve built a beast and upgraded in the best areas. I’ve ordered pretty much everything you’ve mentioned too. Just wondering does the xlx2 need an esc mounting plate, or can the stock one be modified to suit? And is that castle dual fan able to be powered through the receiver or does it have to have its own power source?

@RCKYOTA 3 жыл бұрын

Thanks Ben! , so I re used the stock esc plate I just drilled some holes in it to match the mounting holes on the bottom of the esc . But you can buy this www.xtremercracing.com/Products_By_Brand/XTREME_RACING_TEAM_LOSI_DBXL-E_2.0_CARBON_FIBER_CENTER_DIFF_BRACE_w__ESC_MOUNT_(4mm)/10892 For a cleaner look. I'd recommend the 1100kv over the 800kv if you can its much more powerful on 8s . The castle dual fan can be powered off the reciver but I run mine with upgraded server fans a they draw a fair amount of current. I have a small 1400mah 4s lipo mounted between the motor and reciver box to power the fans

@benjaminmaule2422 3 жыл бұрын

Thankyou Shawn your a wealth of knowledge on the dbxl. Appreciate your advice.

@mikehagquist5198 Жыл бұрын

Metal is good for anything that holds bearings and ring n pinion

@justinwhitaker6128 3 жыл бұрын

I have a Arrma Big Rock and it is well known for taking a hell of a bashing with minimal to no casualties. How would you rate the bashability/durability of these cars with the mods you have? I’d love to bash the hell out of this car setup as you have it, but if I’m repairing it after every bash, I’ll steer clear.

@teamvegarc 3 жыл бұрын

Thanks for the info 🏎💨💯😎

@monroethegreat7539 3 жыл бұрын

Bro i have a question do you think this is a decent fan for this Motor. Integy RC Model Hop-ups C28852SILVER Billet Machined Motor Heatsink & Cooling Fans for Losi 1/5 Desert Buggy XL-E

@monroethegreat7539 3 жыл бұрын

The 18T 8MM Pinion gear is sold out everywhere local hobby shops, Online, Ebay etc, Any other size you would recommend.

@RCKYOTA 3 жыл бұрын

www.amainhobbies.com/losi-8mm-bore-mod-1.5-pinion-gear-18t-los252041/p468532?v=453117&gclid=Cj0KCQiA4L2BBhCvARIsAO0SBda00Nabgb42yJIscgSIBBoRha2kE_jzElJVbOdOu2qJbIVcASeGPCYaAh-hEALw_wcB

@nickdee1913 3 жыл бұрын

Just saw your video I tried the link for the springs again. I couldn’t find it thanks

@RCKYOTA 3 жыл бұрын

Are you in the dbxl owners group on Facebook?

@sandmasher 3 жыл бұрын

Cool cool

@moisesmendez81mm 3 жыл бұрын

Does anyone have a link to motor fan for a stock dbxle 2.0? Just purchased one want to drive it some before upgrading it this much.

@steverc1986 2 жыл бұрын

I have the same one👍👍👍

@rayrod9010 3 жыл бұрын

awesome video thanks for the help... quick question whats the little blue box behind the motor? Also the link of the angle and demon hd 3.0 springs apparently it wont open or they are sold out

@RCKYOTA 3 жыл бұрын

It's a sky rc GSM 020. Basically a gps speedometer . The a and d springs are out of stock right now check arrons store here he re stocks like once a month ebay.com/usr/angeldemonrcuk

@rayrod9010 3 жыл бұрын

@@RCKYOTA thanks man!

@8bitflea 2 жыл бұрын

I really enjoy your videos on this car, the link to the shock springs doesn’t work, did they stop making them?

@RCKYOTA 2 жыл бұрын

He does but I think when the add runs out he has to re do it. If your on Facebook PM Arron Yick . I'll see if I can find a link for it on ebay

@sxepride 6 ай бұрын

Are your wheel extensions 2 inch or 1 inch from DGI. I see they offer both.

@jamesshippIII 3 жыл бұрын

Wow thanks for such a speedy reply and thanks for explaining the "smart sense" feature of the Castle esc.......will the spectrum transmitter still work with it and will the Castle unit come with different instructions for programing than what was in the dbxl e box? Again Im totally new to this hobby, I know nothing, but ready to learn. If I may ask one more question: The SR6 100AT AVT technology telemetry receiver will it still work once I change over to the Castle system? I want to be able to use the auxiliary channels to turn on and off the light bar, add front and rear brake lights, horns/megaphone...etc. I'm sure there are ways to do that even if the spectrum system will no longer be functional but just asking to get your input! Thanks again looking forward.

@RCKYOTA 3 жыл бұрын

Yes your spektrum radio will work still. The new esc will come with a coupon for a free castlelink USB programmer . You download a free program and tune it over your computer . Not sure about the telemetry the car doesn't have brake lights or a horn lol

@jamesshippIII 3 жыл бұрын

@@RCKYOTA okay super fantastic! Oh by the way, the car may not have brake lights or a megaphone but I do and plan to install install them on the buggy. I'll post one day hopefully ..lol 😆 Thanks once again you guys are great ...glad to be joining the family!

@miguelmotocross075 24 күн бұрын

Where I cam find a battery holder for reciever battery?

@BmanMtbr 3 жыл бұрын

Love the video and rig! You inspired me to get one and I’m doing a complete build upgrading it with all the recommended upgrades right out of the box. What length DGI hub extenders did you go with? They offer a 1” and 2” option and wasn’t sure which to go with.

@RCKYOTA 3 жыл бұрын

Thanks man, I really appreciate it. this is why I make the videos! Get more people into it . I'd go with the one inch extenders if you can. There is an American company on ebay called leading edge machine that is making them now too..they are making a website as well its just not done yet .

@BmanMtbr 3 жыл бұрын

Awesome! Thanks I’ll have to check them out.

@oside_m5 Жыл бұрын

I just got my DBLXE 2.0. I did the prolines mx43 last night. Sooo much better. Did you have to have a thin walled 24mm socket or did you have to grind or bend the plastic mugs on the wheel to get the socket to fit? Also I purchased already prior the new Hobby wing max5 G2 250 amps combo with 56118SD 1100KV G2 senored motor.It was 4 for a different outcast build I was going to do that didn’t pan out. Will this combo fit or do I need some custom parts and mounts? Some forums are saying it’s too heavy for 1100kv?!?!? But I tend to believe you and your videos. Sorry so long. Just stumbled across your channel 👍

@RCKYOTA Жыл бұрын

Hey ! Sorry I didn't reply sooner. My socket seems to fit without taking the lug nuts off but I know many people do grind them off with a dremil. I like the 1100kv motor a lot with the xlx2 as it can handle a ton of amps . I don't have first hand expeorence with the max 5 g2 and 1100kv yet but if it runs anything like the castle setup than you will be just fine. I run 18/50 gearing with the 1100kv and it's perfect for bashing. Stock gearing is 13/50 . Hope this helps 🙏

@gaffle-411 3 жыл бұрын

I like how you recommend staying AWAY from heavy metal upgrades. Too many guys want to have a forum queen for fancy pics. Your upgrades seem sensible!

@RCKYOTA 3 жыл бұрын

Yessir this car is used alot. I tried to incorporate upgrades that were functional and actually improved performance. I totally get what your saying there are some guys in the forums with every metal upgrade part you can imagine then they have the max6 and 13t pinion still haha . I don't know what to say to them. It's like a Honda all show no go

@cameronfisher2185 3 жыл бұрын

Is it possible to just get a list of all the things you have on this!!! Just bought one, will be here Monday, and thought It was pretty badass and tough stock. After watching this Im 2nd guessing lol!

@RCKYOTA 3 жыл бұрын

I put a list with all the links innthe description. Haha for me it just wasn't fast enough stock but the first thing I'd do for a stock one is upgrade the pinion gear

@BeautyBeastRC Жыл бұрын

Great video! you totally didn't link the motor mount though. 😎

@RCKYOTA Жыл бұрын

Sorry it's an older FID motor mount . You can get them herewww.ebay.com/itm/265795875240?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Hd30QE9KRqu&sssrc=2349624&ssuid=eyKLgjRDQtq&var=565583834094&widget_ver=artemis&media=COPY

@BeautyBeastRC Жыл бұрын

@@RCKYOTA thanks bro 😎 👍

@RilatinePopper 3 жыл бұрын

Good morning! How has the XLX2 been holding up for you? I'm about to order a XLX2 for my DBXL-E 2.0 but now I'm reading about faulty ESC's and cases of blowing up :( thanks for your reply

@RCKYOTA 3 жыл бұрын

We have 4 xlx2 now all have been without issue. They had a small batch back in December that had some problems but have fixed that since then and I haven't seen any new reports of trouble since then

@jamesshippIII 3 жыл бұрын

Greetings ...brand new to this hobby and this is my first purchase. Questions for ya: 1). the Hitec servo spacers where would I find those and what size would I use? 2) you mentioned an 18t gear upgrade and a 52 spur, where would I find the spur? 3). You mentioned that you run the new motor with smart sense, what is that and where do I get it? Thanks for considering my questions looking forward to your future vids.

@RCKYOTA 3 жыл бұрын

Thanks for watching! Yes, the spacers I got at home depot in the hardware section I'm not sure what the actual length is. I have to go get some screws today ill see if I can find that out. It was the only size they had if I remember correctly. The pinion you should upgrade to 18T leave the stock 50 tooth spur on there. Sorry I get w bit nervous filming myself new too it and don't speak clear always . So yea just grab the pinion gear and leave the spur alone. The motor comes with the xlx2 if you buy it as a combo. The new castle esc are sensored motors and when you run them they use a program called smart sense this allows the car to start in sensored mode so its buttery smooth at low speed and rpm them once you get flying down the road it switches to non sensored mode automatically as this is much more effective for the motor to make power at high rpm hope this helps you can get the motor and esc at amainhobbies or castlecrestions directly

@jamesshippIII 3 жыл бұрын

@@RCKYOTA I've started working on those upgrades....how critical is it to use the dgi tire extenders? When I installed the first one on the right rear, I noticed play in the wheel that was not there with the stock mounted tires, so I put the stock mounts back on with the new tires, and that play disappeared.. Is the extra play I noticed normal? I installed the Badland tires using the stock mount and the play is not there. Your thoughts please. Also is there a video showing the procedure to install the 18t pinion gear? Is it as simple as a mechanical change out , are there any settings to change etc? Just asking because when you are a newbie things often are not always as simple as ya might think.

@RCKYOTA 3 жыл бұрын

@@jamesshippIII I'd still run them a little play is fine you could shim the hub area if it causes an issue

@fredstoychest 2 жыл бұрын

I was curious what spacers did you use for mounting the servo.

@RCKYOTA 2 жыл бұрын

I got them from home depot in the hardware section. Just some metal spaces . Maybe 1/4" in length

@derekwegmann3767 2 жыл бұрын

The battery you're using for your motor fan, do you just have it Velcroed down? I want to do the same thing with my fans

@RCKYOTA 2 жыл бұрын

Yes I made a little plate with slots for velcro straps

@gaffle-411 3 жыл бұрын

Hey Shawn, what camera did you use to record this video?

@RCKYOTA 3 жыл бұрын

Note 20 Ultra, when I record the car running or fpv tho I use a hero 8

@dmkolb1977 3 жыл бұрын

Are you having heat issues with the 1100kv motor in this heavy buggy compared to the 800kv?

@RCKYOTA 3 жыл бұрын

Nope runs great. Buggy is 28.1 pounds. Xlx2 system is rated for 40 to 45 pounds. I have motor fans

@sequest 3 жыл бұрын

I had the same setup and notice the pinion sits 2mm off the end of the motor shaft in order to line up with the spur. Do you have that issue?

@RCKYOTA 3 жыл бұрын

Hey sorry just saw this. As long as you line the gear up with the spur gear you will be fine. I think mine hands off just a tad

@dpgoverride 2 жыл бұрын

Going through your videos as I am looking to convert my DBXL to an E 2.0....Trying to figure out if I should go 800 or 1100kv, I have been reading that the 1100kv in grass has issues overheating with tall gearing. Have any thoughts or recommendations on this? I want good speed but also plenty of torque to get throw it around, thanks!

@RCKYOTA 2 жыл бұрын

1100kv has a ton of low end power. It makes more power than the 800kv on the logs. I see 8-9hp with the 800, 14-16 with the 1100kv. Tall grass is the bane of brushless rc. It def makes the motor run hotter than any other terrain. If you run in grass alot I wouldn't go higher than 15,16T pinion and 50T spur

@dpgoverride 2 жыл бұрын

@@RCKYOTA alrighty, so would you say 1100kv would be best geared lower w/ fans for grassy terrain? I only have parks to run at around my area w/ anywhere between freshly cut to 4-5 inches tall. Thanks for commenting, appreciate you!

@RCKYOTA 2 жыл бұрын

Yea low geared 1100kv would be great either way I think.

@silly_d_williams2167 3 жыл бұрын

How did u get the batteries to fit in tray...?

@RCKYOTA 3 жыл бұрын

At 730 in the video I talk about it , cut the ends off cleaned up with tray

@504Plate 3 жыл бұрын

What weight diff fluid do you recommend for front, center and rear? (On a fully stock 2.0)

@RCKYOTA 3 жыл бұрын

Stock is fine . You want some tire spin up front. It keeps it from flipping backwards and helps the car stay straight. I know people like to lock the center diff but I have no idea why. It's way more harsh on the running gear.

@504Plate 3 жыл бұрын

@@RCKYOTA Thanks! Makes perfect sence!

@pfunk72 2 жыл бұрын

How were u able to place your esc straight. I noticed a lot of other people That have the XLX2 Has it turned sideways I don't like it like that I prefer to have mine like yours. is there something you bought so u can have your esc straight.

@RCKYOTA 2 жыл бұрын

I just drilled the holes in the stock esc plate so I could mount it that way .was a plastic tab I cut off I want to say. If you get the vitavon esc mount it mounts the xlx2 like I have mine also. Or the extreme rc one. I don't know why people mount them sideways it looks bad haha.

@pfunk72 2 жыл бұрын

@@RCKYOTA thanks for the info I appreciate it. Yeah there's no way I would have mounted my esc sideways lol.

@ahwayzcool4630 2 жыл бұрын

Hey Rckyota. Does your xlx2 have reverse WITH braking? I did a recalibration of esc yesterday and now I can't get the reverse with braking to work. Truck will go into reverse and when I go forward on throttle it IMMEDIATELY goes forward instead of braking first. Thats not good for the drivetrain. I ended up disabling reverse until I can figure out whats wrong. It was working before for almost a year now until I did the recalibration yesterday.

@RCKYOTA 2 жыл бұрын

If you go forwards and hit reverse it should brake . Not instantly go into reverse. But if you are reverse and squeeze the throttle to go forward it will instantly go forwards. There is no brake when you are backing up and need to go forwards normally . To fix the car from Instnatly going to reverse while moving forwards make sure you have no reverse the throttle input on your remote, haven't switched motor a and c motor wires around and lastly you may need to change the motor direction under the motor tab in castle link then reverse the input on your remote . Sounds like you have something switched around.

@ahwayzcool4630 2 жыл бұрын

@@RCKYOTA Oh ok. I have braking when driving forward when I push the trigger forward. I just don't have braking when im driving in reverse. But from what you say there is no braking for reverse. Well thats a relief because i thought something was wrong with my esc. I know my XMaxx with the stock esc has braking for both forward and reverse, thought the xlx2 would have it also. Thanks for your help.

@harry6320 2 жыл бұрын

What servo horn do you use on that servo?

@RCKYOTA 2 жыл бұрын

Stock one on the 2.0 is fine but you need some shorter servo links .

@monroethegreat7539 3 жыл бұрын

I have a question is a Losi 18T Pinion Gear the same quality as a GDS racing Pinion gear or a Hot racing Pinion Gear?

@RCKYOTA 3 жыл бұрын

Yep . They are all the same ish

@monroethegreat7539 3 жыл бұрын

@@RCKYOTA Ok thanks bro, Is there a big difference between a 17 or 18T pinion gear?

@monroethegreat7539 3 жыл бұрын

I am interested in purchasing the same model D-845WP for my Losi DBXL-E, Whats strange there are 2, One with a Black wheel which is the one you have and one with a white wheel, But the model with the white wheel most of the housing is black but its the same model numbers, Do you know the difference between the both?

@RCKYOTA 3 жыл бұрын

The one with black on the sides and curved is the old one they don't sell it anymore whatever one you buy they will ship you the one I have.

@monroethegreat7539 3 жыл бұрын

@@RCKYOTA Thanks bro, I actually got the same motel but i can't find the Castle fan or shroud anywhere, Do you think these 2 will work for that motor? 2-Packs 40 x 40 x 10mm 4010 12V 0.10A Brushless DC Cooling Fan 2pin AV-F4010MB UL CE

@ibsilly4u568 3 жыл бұрын

Do u have to put the wheel hub extension to run the badlands

@RCKYOTA 3 жыл бұрын

You can run them without but they might rub the wing a bit

@mannyramos515 3 жыл бұрын

I have been having horrible luck with my ride. First time out broke a steering rod, second time out steering servo grenaded

@RCKYOTA 3 жыл бұрын

Ahh man that sucks sorry to hear. The stock servo is pretty bad you will be happy with the hitech if you upgrade

@imserious2187 3 жыл бұрын

Do those fans plug into the receiver?

@RCKYOTA 3 жыл бұрын

No , I run them off small lipo

@terrypeterson9783 2 жыл бұрын

Hey Shock outerwears? We"re can I get those?

@RCKYOTA 2 жыл бұрын

I found them on ebay I think I have a link for them in the description possibly of this video

@rcpimp6419 3 жыл бұрын

good video

@shawnjohnson7674 3 жыл бұрын

Thank you sir

@Jeff.55649 2 жыл бұрын

What mip tool stand is that?

@RCKYOTA 2 жыл бұрын

Mod racing

@zeelux55 2 жыл бұрын

Why am 1100kv motor when a 780kv is already installed?

@RCKYOTA 2 жыл бұрын

780kv has way less power. Higher kv equals more speed. Plus the 2028 1100kv has a ton of torque and low end power. The stock motor is rated for 5 horsepower. The castle 1100kv makes 14-15hp

@lbtank7508 3 жыл бұрын

What gearing are you using? How fast is this setup?

@RCKYOTA 3 жыл бұрын

Does about 70 with 18/50. 75 ish with 18/48 I was running 18/ 48 for a bit but it ran too hot for constant use 18/50 is perfect tho with some good motor fans. We tested out 23/48 and that were able to do 80 mph

@runngunrc1991 3 жыл бұрын

Would I be better off building from scratch an just buy the upgraded parts ?

@RCKYOTA 3 жыл бұрын

Look for a roller . Building from scratch would be expensive .

@johnmiller4553 Жыл бұрын

NICE 🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙

@mgate01 3 жыл бұрын

Can the mechanical brakes work with that center diff mount?

@RCKYOTA 3 жыл бұрын

Yes , but the mechanical brake isn't needed for most modern esc.

@mgate01 3 жыл бұрын

@@RCKYOTA it is if you want longer run time, less heat in the motor and esc front/rear bias and all around easier on the equipment.

@RCKYOTA 3 жыл бұрын

@@mgate01 I tried it with brakes and didn't see much of a heat increase, if any.. The castle escs have amazing motor brake. Guess it's a trade off. Extra weight on the car with more servos and parts equals faster draining battery's as well.

@truelies74 8 ай бұрын

💚💯

@k-swiftthejuggernaut4176 3 жыл бұрын

Just got mine and I haven't even ran it. I literally want to do exactly what you did to yours ☝️. Are you in California?

@RCKYOTA 3 жыл бұрын

Yessir , sorry I missed your comment

@imserious2187 3 жыл бұрын

Sensored was better than going sensorless?

@RCKYOTA 3 жыл бұрын

Oh ya night and day better. I dont ever want to run a sensorless setup again. They stutter and run like crap at low rpm. On a race track when you slow down in corners this could slow you down quite a bit .

@Blueknight1960 3 жыл бұрын

When you changed out the esc and motor, did you loose AVC? AVC really helps keeping it straight on high speed runs.

@RCKYOTA 3 жыл бұрын

Yea you loose that. I kept it disabled from day one on mine..makes the car react weird and very high speed

@Blueknight1960 3 жыл бұрын

@@RCKYOTA I've seen a few video where the xlx2 is catching fire, what's your thoughts on this?

@RCKYOTA 3 жыл бұрын

@blueknight most of them especially the Kevin Talbot video is user error. Right in the paper work it says 150 plus amp plugs are required and 200 amp are recommended. He used 120amp ec5 with a 3200 kv D wind tp motor and free revved the piss out of it..prob sent 900 amps through it. In my experience if you use the right connectors, high quality batteries and have a competent soldering job you will have Zero issues. We have the xlx2 in our dbxl, 5iveB and xmaxx. Zero issues .

@Blueknight1960 3 жыл бұрын

@@RCKYOTA Thank you. How do you think the stock spektrum motor would handle the xlx2? I also plan on getting the smc 9700mah 120c 4s batteries.

@RCKYOTA 3 жыл бұрын

Stock motor would be fine . It's low kv 780 and should make good power. Not quite as much power as a castle 800 or 1100 but def more than stock with the xlx2. You wouldn't get the benefits of running In sensor mode tho which is very nice. But if you can only upgrade 1 or that other I would s Do esc first, run it with stock motor until you can upgrade to a castle motor.

@user-eq2il8ij1h 11 ай бұрын

What kind of motor? Castle 2028 1100kv?

@RCKYOTA 11 ай бұрын

Yes

@treyvon8389 2 жыл бұрын

Decided to take my dbxl to 12s either mgm 400amp, ezrunmax 4 or flier 🤔

@RCKYOTA 2 жыл бұрын

Flier if you do any of them. But none of them have the amp capabilities of the xlx2. The dude testing the max 4 said its not as powerful on 12s as the xlx2 on 8s is. All of those 12s esc are capped at 300-400 amps.unless you fork out 2k for 800amp mgm esc. Xlx2 can handle 700amps tho. Dude just did 106mph with a dbxle xlx2 setup 2 weeks ago.

@treyvon8389 2 жыл бұрын

@@RCKYOTA just tested the tp motor it has so much power im gonna keep it on 8s with the xlx2

@treyvon8389 2 жыл бұрын

My rear wheel drive stopped working i assume its from a center diff problem

@RCKYOTA 2 жыл бұрын

@@treyvon8389 check for a missing cv pin on one of your axles

@treyvon8389 2 жыл бұрын

@@RCKYOTA fixed it thanks

@BuildaPC4life 3 жыл бұрын

What hestsink is that

@RCKYOTA 3 жыл бұрын

That's just sa castle dual fan shroud . No heat sink on this one

@lbtank7508 3 жыл бұрын

My xlx2 esc cuts out when I instantly go to full throttle from stop. It works fine if I ease into the throttle though. Any suggestions?

@RCKYOTA 3 жыл бұрын

Set your start power to low. What batteries, gearing and motor ? Dbxl?

@lbtank7508 3 жыл бұрын

@@RCKYOTA dbxle 2.0 the start power is at the low default, and I’m using the smc 9700 battery with the castle 1100 kv motor. 18t pinion and stock spur.

@RCKYOTA 3 жыл бұрын

I thought medium was default, what is your LVC set too? Also try turning up the punch control . It's usually set at zero/ disabled put that to like 50% see if it still does it then go down 40,30, 20% until it starts doing it again. Then set it 10%higher than this .

@lbtank7508 3 жыл бұрын

@@RCKYOTA I will try this later today. Thanks for your help and quick response!

@lbtank7508 3 жыл бұрын

Set the punch to 50% and it’s running great. Thanks again!

@chrisvillanueva1974 3 жыл бұрын

Did you upgrade your bearings? If so what did you use?

@RCKYOTA 3 жыл бұрын

No , i seem to have gotten lucky with this car . All bearings are stock .

@chrisvillanueva1974 3 жыл бұрын

@@RCKYOTA Wow I'm impressed! My rear dif went out like the 5th run. 😳 nice set up on your rig though man definitely goals!

@RCKYOTA 3 жыл бұрын

@@chrisvillanueva1974 hmm when you hit jumps let off the throttle before landing if you can this puts a ton of wear and tear on the drivetrain if you keep the throttle down when landing Thanks man

@smrdmr1 2 жыл бұрын

Does your 1100KV, XLX2 with the 18 tooth go into thermal really quick?

@RCKYOTA 2 жыл бұрын

No, hardly ever. What terrain are you running in?tall grass will heat it up the most. I set my motor cutoff to 175f

@smrdmr1 2 жыл бұрын

@@RCKYOTA I'm using the 18 tooth with a HW 1100kv and The stock Firma ESC. That's most likely my problem. LOL

@smrdmr1 2 жыл бұрын

And I'm running it on the street.

@RCKYOTA 2 жыл бұрын

@@smrdmr1 oh yea.. thats 100% your problem . The firma struggles with the 780kv on 18T. Slap a xlx2 or max in there a d you will be fine

@lbtank7508 3 жыл бұрын

Are you using the stock motor mount on the castle motor?

@RCKYOTA 3 жыл бұрын

Yes, you can. It bolts right to it

@lbtank7508 3 жыл бұрын

@@RCKYOTA thanks!

@ashtonburkett7532 3 жыл бұрын

the link for the DGI V2 wheel extenders doesn't work can you give me a new link

@RCKYOTA 3 жыл бұрын

Hey , sorry but it looks like DGI discontinued them. They machine work was too expensive. Im sorry man. They still make the v1s. A bunch of other companies make v1 style as well. Hope that helps.

@ashtonburkett7532 3 жыл бұрын

@@RCKYOTA ok thanks for letting me know can you give me the link for the v1 i am new to this so if you could that would be great.

@michaelaycock3744 3 жыл бұрын

Can I get the name of both gears

@RCKYOTA 3 жыл бұрын

The spur gear is stock 50T and the pinion gear is made by gds racing 18T

@Todd_G_FPV 3 жыл бұрын

Will those axle extenders work on the xmaxx?

@RCKYOTA 3 жыл бұрын

No sorry these would be too big. Wforc makes a wide kit for the xmaxx its pretty expensive tho

@Todd_G_FPV 3 жыл бұрын

@@RCKYOTA dang 625 is crazy high lol

@RCKYOTA 3 жыл бұрын

@@Todd_G_FPV I agree lol.

@Todd_G_FPV 3 жыл бұрын

@@RCKYOTA im sure it helps big time with handling but that's about half of what I paid for truck, charger, and batteries when I got it new at the hobby shop 2 years ago lol I see hotracing (I think) makes some wheel hexes that are about 3.3mm wider than stock so I could get about 6.6mm of width for about $24 lol

@RCKYOTA 3 жыл бұрын

@@Todd_G_FPV thats more than what I paid for my xmaxx lol we got ours for 500. Don't get me wrong it's a nice kit with quality custom parts but it's beyond my rc budget. I think arc hobby is working on an injection molded plastic set of wide arms . Prob be a few more months tho

@SIRICKO 3 жыл бұрын

You do not need to mod you battery trays to fit these batteries.

@RCKYOTA 3 жыл бұрын

Yea you do if you want them to fit in to the bottom.. Otherwise you have to force them In there. The cells are full of acid and chemcials you can damage them very easily .

@SIRICKO 3 жыл бұрын

@@RCKYOTA I have the same damn batteries no you don't!

@RCKYOTA 3 жыл бұрын

@@SIRICKO post a video of you doing it grantee you are smashing it in there. I have 2 of these dbxle and 4 sets of the 9700mah smc they don't fit in either lmao

@RCKYOTA 3 жыл бұрын

@@SIRICKO @rckyota

@arielitovalenzuela8990 3 жыл бұрын

Hey man I really need help , just bought one and I haven’t bought batteries, what do I need to be set man witch type of batteries out of the 8 conectors do I need ? And what else do I need , type of charger? Help me out man how can I find your social media

@RCKYOTA 3 жыл бұрын

I'm on Facebook and @rckyota on Instagram. I can help you. Are you planning to run the stock esc or upgrade to castle ?

@arielitovalenzuela8990 3 жыл бұрын

@@RCKYOTA for now the stock but I’ll send you a message in fb thank you

@RCKYOTA 3 жыл бұрын

@@arielitovalenzuela8990 sounds good..im in the dbxle owners group on Facebook. I mod for them

@arielitovalenzuela8990 3 жыл бұрын

@@RCKYOTA I sent you a dm on instagram

@arielitovalenzuela8990 3 жыл бұрын

@@RCKYOTA hey man so what do I need to start using it those same batteries you have ?

@onemansvideos2134 3 жыл бұрын

Its strange they come with a 800kv motor and basically a max6

@RCKYOTA 3 жыл бұрын

Yea way underpowered with the stock esc. The stock motor you could run , with a max5 or castle, or flier and it would be alot better over stock, But for the full upgrade I'd do both motor and esc. Escpecially if you want to go sensored. Running in sensored mode is super nice 👌

@onemansvideos2134 3 жыл бұрын

@@RCKYOTA would be awesome if spektrum released their version of the max5 cause I believe the spektrum versions are lil better cause of the software updates and adjustments you can make to the esc that hobbywing doesn't allow