Thanks 🙏

Nice 👍

Also on a Dbxle 2.0?

@@harbinger26 yes, i had it in a DBXLE 2.0 I’ve since removed that motor (heat issues even with stock pinion) i have the HW 800kv motor in it now with an 18t pinion. Hits low 60’s but i don’t need it to go any faster on the dirt. Unlike my 12s Kraton 8s hitting 84mph. THAT is an insane vehicle.

@@Danspeed3 yeah wow that's insanely fast. Speed always sounds good but it usually results in more accidents and damage and at the weight of these vehicles, it's also a bit dangerous.

Thanks

I was commenting on it and you deleted it so it wouldn’t let me send my response short answer is I’m a single dad raising three kids alone 90 hours a week at one job plus my automotive shop my time is very limited to build rc for ppl and it’s a responsibility I don’t want to take on with KZfaq and my two other jobs right now maybe when I retire but for now I’m sorry I truly am 👍🙏

@@earlmoorhead5555 I can respect that being a dad of four kids and having two jobs myself it’s just I have so much passion for the sport but I don’t have the confidence to actually start doing anything with them I have three brand new RC‘s all type of me motors and parts and stuff and they just said I’m gonna be honest but one day I’ll get the courage to start roentgen anyways I wish you the best sir thanks for your reply

Yes stock there about 30 mph but that was sad 😢

I have the V1, and out the box I clocked it at 42. That's with the Dynamite Fuze set up, which is pretty much a rebranded hobbywing 800kv setup if I'm not mistaken.

I feel it’s to much power for the differential as these 8s systems already break them 12s won’t hold up at all

I think with losi bulkheads you have use aluminum if you want to go crazy with the power , the gears are good but the case will flex . I think 50 mph is plenty though .

That's 250 mph in scale BTW lol

Lol 😂

I've got 2 Max4's at the moment. They are fantastic. Heck I run one in my Kraton 8s and it's holding up just fine. I will say that running 8s on the max4 vs the xlx2 is much weaker.

Something wrong with that 2.0 mines is way faster then that stock

Yes mine is dual steering servo now and still not good

💪💪🚀🚀

Stock

Yes I have a set up

Gearing was close and I did show mph reading 🤔?

@@earlmoorhead5555 sorry must of missed it. Like to wrench on my Rcs while I watch.

Yes it was 😳

@@earlmoorhead5555 yeah I was shocked, too. Sure doesn't seem right. That system should rip.

@@soundmindtv2911 yes it should

Thanks

It’s a 1/5th scale system 🤔🤷🏻‍♂️

XRT

@@earlmoorhead5555 Thank you.. Have a great 4th!🇺🇸

I would assume they would have been closer in speed. Since the castle setup had a bigger pinion than the other the spur is 2 teeth bigger but having 17t pinion should have made it closer than it was. 32 mph seems like there is something going on. That's almost 20mph difference.

I would have guessed about the same 👍

Lol I did this time 😳🤪🤪

@@earlmoorhead5555 earl don’t you have an 1100kv castle motor in the losi dbxle 2.0? Or is it an 800kv? Well was was the issue because there is no way top speed was only 32mph on the 2.0 with the xlx2 geared 17/50 you should at least be in the high 40s with that gearing???????? It’s killing me

No swap out the 1100kv and used it in the thunder truck

The light bars run super hot. Likely they simply burn themselves out.

I’ve been lucky then all mine work but my sbr 2 has a couple led out but the sbr1 still lights up strong with all my other Losi Vehical 👍👌

Notification squad 👑💪👍👌

Yes videos out showing the data log 20% only ⚠️

Video quality is 1080p on a go pro looks great on my tv screen 🤷🏻‍♂️

@@earlmoorhead5555 no way is that 1080 it’s blocky blurred not a clear pic at all just saying all your vids are like it like there’s grease on the lense watch a 1080 then watch yours yours looks more like 580