Lossless Scaling Guide | Frame Generation & Upscaling In ANY Game

No video

Lossless Scaling Guide | Frame Generation & Upscaling In ANY Game

Рет қаралды 278,344

Күн бұрын

Program: store.steampow...
Universal LSFG Guide (AMD/Intel/NVIDIA)
1: Set your game to borderless fullscreen (if the option does not exist or work then windowed, it does not work with exclusive fullscreen)
2: Set "Scaling Mode" to "Auto" and "Scaling Type" to "Off" (this ensures you're playing at native & not upscaling, since the app also has upscaling functionality which you can use if you want)
3: Limit your framerate by half of your monitors hertz, if you want a lower framerate then you need to lower your hertz as well (ex: 120 ÷ 2 = 60) via RTSS or driver. Hertz that end in odd numbers that cannot be evenly capped (165hz) will either have to make a custom hz like 164hz or go down to something like 144hz.
4: Whatever framerate you have make sure you're able to maintain it so you don't throw off the frame pacing (it has to be stable and consistent)
5: Now click scale then click on your game. You can also setup a keybind to do it. After this step your game will be interpolated
NVIDIA LSFG Guide
1: Set your monitor to its highest supported hertz
2. Check your game and find what frame you can hit consistently & cap it there
3: Add LosslessScaling.exe to NVIDIA's control panel and add a framerate cap that's double your capped in game FPS (unless it exceeds your refresh rate, in which case framecap lower or don't use FG)
4: Use the ordinary steps to scale your game & everything. This method should provide superior results but only works for NVIDIA users
Bonus Tips
Tip 1: Some people found better results adding Lossless Scaling to their driver software then enabling forced v-sync on it
Tip 2: Overlays can interfere with Lossless Scaling
Tip 3: Things under the "Rendering" tab except "Draw FPS" in the program may cause issues as they're untested. If you encounter any issues disable them
Tip 4: Playing with controller offers a better experience than mouse as latency penalties are much harder to perceive
Tip 5: Use upscaling with a scale factor of 1.1 or 1.2 to offset the FG cost (LS1 or FSR1 recommended)
Minimum & Recommended List
Minimum Supported: 30fps to 60hz
Minimum Advised: 45fps to 90hz
Minimum Recommended: 60fps to 120hz
Recommended: 120fps+ to 240hz+
Info 0:00
Upscaling Borderless 0:24
Upscaling Windowed 1:37
Frame Gen 2:24
Best Upscaling Method 4:15
Tips & Fixes 5:10
DONATIONS
------------------------------------------------------
► Ko-fi: ko-fi.com/Hybred
► CashApp: cash.app/$MRDMH1
► Patreon: / hybred
All Of My Texture/Shader/Sound/Skin/Behvaior Packs
------------------------------------------------------
► All Packs: linktr.ee/Hybr...
OTHER SOCIAL MEDIAS
------------------------------------------------------
► X/Twitter: / thehybred
► Discord: / discord
► Reddit: / thehybred
PC SPECS
------------------------------------------------------
► Video Card: Radeon RX 5700 XT 8 GB
► CPU: AMD Ryzen 7 3700X 3.6 GHz 8-Core Processor
► Memory: Crucial Ballistix 16 GB (2 x 8 GB) DDR4-3600 CL16
► Storage: Crucial P1 1 TB M.2-2280 NVME Solid State Drive
► Motherboard: MSI B550-A PRO ATX AM4
► Power Supply: Antec Earthwatts Gold Pro 750 W 80+ Gold Certified Semi-modular ATX
► Case: Phanteks Eclipse P400A ATX Mid Tower
► Case Fan: ARCTIC P12 PST 56.3 CFM 120 mm Fans 5-Pack
IGNORE TAGS!
------------------------------------------------------
xbox one, xbox series s, xbox series x, playstation, ps4, ps5, 2023, new, newest, latest, still working, patch, notes, reveal, resolution, performance, perf, benchmark, lets play, walkthrough, how to, guide, tutorial, optimized, optimal, optimised, settings, uplift, boost, montage, highlights, compilation, funny moments, fails, meme, best moments, world record, #1, ranked, top player, best, commentary, season, year, op, nerf, master, professional, pro league, esports, mlg, tournament, rtx, raytracing, pathtracing, nvidia, amd, realistic, max settings, epic, ultra, high, medium, low, lowest, potato, windows 10, windows 11, linux, pc handheld, steam deck, rog ally, custom, resource pack, texture pack, shaders, sounds, skins, behavior, addon, mods, modded, modpack, pack folder, release, 1080p, 1440p, 4k, 5k, 8k, 20k, 60fps, 120fps, 144fps, 240fps, 360fps, 1000fps, 120hz, 144hz, 240hz, 360hz, 540hz, 1000hz, ls, lossless scaling, ls1, lsfi, lsfg, fsr, nis, xbr, integer

Пікірлер: 470

@Hybred 7 ай бұрын

*LSFG Guide* 1 - Set your game to borderless fullscreen (if the option does not exist or work then windowed, it does NOT work with exclusive fullscreen) 2- Set "Scaling Mode" to "Auto" and "Scaling Type" to "Off" (this ensures you're playing at native & not upscaling, since the app also has upscaling functionality which you can use if you want) 3 - Cap your in game FPS to half your monitors refresh rate hertz. If your hertz isn't evenly dividable like 165 just round down (this tip applies to the DXGI capture method, if using a different form of capturing there's an additional requirement which is that you need a stable and locked framerate for correct framepacing) *LSFG Tips* Tip 1: Some people found better results adding Lossless Scaling to their driver software then enabling forced v-sync on it Tip 2: Overlays can interfere with Lossless Scaling Tip 3: Things under the "Rendering" tab except "Draw FPS" in the program may cause issues. If you encounter any issues disable them Tip 4: Playing with controller offers a better experience than mouse as latency penalties are much harder to perceive Tip 5: Enhanced Sync, Fast Sync & Adaptive Sync do not work Tip 6: Due to the fact LSFG has a performance overhead use a scale factor of 1.1 or 1.2 to offset its cost entirely (recommended to use with LS1 or FSR1) Some of these tips require experimentation/testing, so actually see if they help or harm your experience

@astreakaito5625 7 ай бұрын

Oh great idea I never thought about this before! I'll add an exception to rtss for LS. Thanks!

@N3koyama 7 ай бұрын

The first part is not necessary, rtss does not affect Lossless Scaling. The only way to Actually Cap FPS on Lossless Scaling is via Driver Level, that means either with Nvidia control panel or AMDs counterpart. You can test this with the Draw FPS Option in Lossless Scaling, it will show you the Frames it's generating. If I'm wrong, pls correct me!

@Hybred 7 ай бұрын

@@N3koyama amd has two FPS capping options. Which one?

@N3koyama 7 ай бұрын

@@Hybredsadly I can't test that! Maybee some other user here with a AMD GPU could test it.

@Hybred 7 ай бұрын

@@N3koyama neither of the AMD driver options worked for me

@colledeicorvi7422 7 ай бұрын

Frame generation feels like magic, i am using it to play PS2 games at 120fps it's incredible

@zainmalik9666 7 ай бұрын

Glad you’re liking it! How’s the input lag? It sounds way too good to be true and honestly if it was that good I’d 100% choose it over nvidias frame gen because I prefer a locked frame rate to my panels capabilities over vrr.

@ppgod6989 7 ай бұрын

I played Zelda ToTK at 60 fps on my bad pc lol it feels amazing with controller , no input lag whatsoever. It's 10x better than playing on the switch

@astreakaito5625 7 ай бұрын

Yeah it's funny how well it works for PS2 games, because of games back then handled camera motion it didn't break the framegen as much.

@florentb8578 7 ай бұрын

Nice idea !! @@ppgod6989 do you mind telling what emulator you used ?

@Kavern2x 7 ай бұрын

@@zainmalik9666overclock your controller

@kyledupont7711 7 ай бұрын

I feel like it's not really registering with people how insane this is

@whizkoochristian5580 24 күн бұрын

not everyone is smart enough to understand what is happening, it will take a while, but they will catch on for sure

@user-pq8kd8fx6d 7 ай бұрын

If using upscale I recommend using LS1 and LS1 performance. They are machine-learning spatial upscalers made by the developer behind lossless scaling and they are amazing at preserving details. LS1 has the same impact on the hardware as FSR1 with way better quality, while LS1 Performance has lesser quality than standard LS1 but with more FPS, and higher quality and FPS than FSR1.

@Hybred 7 ай бұрын

I'd say slightly better quality than FSR1 not way better. LS1 also has an issue with oversharpening

@user-pq8kd8fx6d 7 ай бұрын

@@Hybred If upscaling from 1080p upwards with zero or 1 sharpness it looks way better than FSR1, especially 1080p to 4k

@beneta0312 7 ай бұрын

bro i did what you sad and it JUST WORKS, bro thaks so much S2

@GloriousCoffeeBun 7 ай бұрын

Fsr1 was a glorified sharpening filter and LS1 with the help of spacial upscaling being better than fsr1 is nothing surprising but still a big w for the dev making this kind of bangers for all the low end gamers

@ladiesman9179 24 күн бұрын

thank you very much for the info! now i feel like i am REALLY using lossless scaling thanks to your settings!!!!

@awepizza 7 ай бұрын

I have this tool for years. im glad they are updating it

@kalei91 2 ай бұрын

>make a video about a software that's made to increase fps >don't show fps Absolutely incredible

@omegakite Ай бұрын

well you cant show fps no recording software will capture that overlay also no 3rd party fps view will show the frame generation fps

@pacla3370 Ай бұрын

@@omegakite have you ever seen any benchmark videos?

@zipzip6677 Ай бұрын

@@pacla3370 those benchmark videos use msi afterburner which only shows the games framerate. if this guy used that youd only see 60 fps the whole time because frame generation is happening after the game renders. the framegen program would have to have its own fps counter for you to see the higher fps.

@pacla3370 Ай бұрын

@@zipzip6677 true youre right

@zerocal76 Ай бұрын

Dropping that game tech knowwwwledgge @@zipzip6677

@RetroGameWorld8 5 ай бұрын

Thank you so much for this. This is the ultimate guide for Frame generation, works great on the ROG Ally!

@fazendohistoria_ 7 ай бұрын

Best explanation I've found for this software, thank you man.

@MrSuperkronos2010 7 ай бұрын

Used this with the FSR 3 mod in Cyberpunk to go from 36 to 144 frames. The input lag is noticeable but still interesting.

@Hybred 7 ай бұрын

Lol. Glad it worked

@brokeDude2901 7 ай бұрын

bro is the king of frame generation

@TheMahtimursu 7 ай бұрын

@@brokeDude2901yo dawg. I heard you like frames…

@EfeDursun125 7 ай бұрын

bruh :D

@GeorgePinkFloyd 6 ай бұрын

bro generates all the frames

@akosfarkashazi3900 Ай бұрын

So you set the desired resolution in the game itself, (so for me it would be 4k) and if i set the lossless upscaling to 2x it would set the render resolution to like 1080p and upscale it to 4k OR I set the render resolution (at like 1080p/1440 sorry idk how 2x works, if it doubles the pixeldensity or the height of the resolution, my guess the pixeldensity) and then set it to 2x to get 4k? From the video i would guess the first since you said after you set it the fps increases, not the resolution, but i am still at a loss on how this works Ps.: sorry i know it’s a dumb question

@t1psy_ 5 ай бұрын

It just got updated to remove UI ghosting/artefacting while using frame generation. Now it double your fps and works like a dream.

@oo--7714 7 ай бұрын

I bought lossless scaling years ago, man it is finally worth using lol

@hybridkam 18 күн бұрын

@SordidusFellatio does it still work well even if it's pirated?

@jespee 6 күн бұрын

@@hybridkam yes I have it

@kennyplayer7731 7 ай бұрын

I tried this feature in my aya neo geek with amd 680m and is a game changer specially for battery handheld devices it helps keep the console cool and warm by limiting frame rate

@ArthurTorrias 4 ай бұрын

Worked like a charm on my poor poor GTX 970. Getting consistent 60 fps in the Lower City on Baldur's Gate 3. Artifacts here and there but that's to be expected.

@Sarcaustik Ай бұрын

Awesome. What type of scaling are you using? Thanks in advance.

@zerocal76 Ай бұрын

This gave me hope for my GT 540M from 2012 😮😅

@NeelixMaster 2 күн бұрын

I also have a GTX 970 can you share ur configs please?

@isntrael 2 ай бұрын

how do you not have a fps display up?

@applecore4525 6 күн бұрын

because there's no way to capture the generated frames from lossless scaling

@astreakaito5625 7 ай бұрын

Some please ask the Loseless Scaling dev to add black frame insertion too, it would be amazing. saw the update but nice seeing you making a vid about LS, it is a really great app already

@Hybred 7 ай бұрын

It was attempted but didn't work well & it caused image retention on LCD displays

@Ty-sm9cv 7 ай бұрын

@@Hybred Image retention should only be issues on certain refresh rates, if you're using a ration that isn't 1:1 I believe it's not an issue.

@Sneynos 7 ай бұрын

how to see if its working ? imean how to see the final frame per second ? (edit : You can see result with "Draw FPS" in setting)

@awantedboi 5 ай бұрын

You can use MSI Afterburner with RTSS.

@Jakiyyyyy 6 ай бұрын

I have a question. In the previous versions, the upscaling does work. But now with the latest update the scaling seem like it no longer work. I tried with the LS1, NIS, FSR but none of these worked. I also checked and unchecked the Resize Before Scaling and Windowed Mode and Auto option but nothing the upscaling would do. Tried with 1.5x but not working too. Of course it's activated but no frames came out of it despite being GPU bounded. The frames just dozen change. It even reduce the frames while activated. LSFG however does work. But you don't have to lock half of your refresh rate. As long as you can maintain those frames it's going to be okay. From 30 to 60, from 60 to 120. What do though? It seems like they keep get rekt every updates.

@virtualpilgrim8645 2 ай бұрын

Sorry about your life...

@AromonChannel Ай бұрын

btw if you got black bar on the bottom when you use lossless scaling change scaling mode to custom and change scale factor to 1 if you want to have the same effect as auto scaling mode

@dagreatberich1070 7 ай бұрын

So this works with video players and with the google chrome browser also. Both the framegen and the upscaling/sharpness. I am also using it with RTX super resolution as well. I put a shortcut on my mmo mouse with the scale hotkey because you need to enable and disable when switching between programs. (So far its somewhat usable for gaming )

@BallMcSack 6 ай бұрын

My 1080ti may live to see another game.

@dfw4866 4 ай бұрын

Did it work?

@AELabsHonkai 7 ай бұрын

I'm actually like annoyed and happy because this frame generation is guessing BETTER than AFMF frame generation in some scenarios i can't believe it. Edit: Only at higher fps values. At lower more realistic fps like 60, afmf does a way better job.

@darkerm76 7 ай бұрын

NICE Guide mate. Thanks a lot

@transgirl2106 6 ай бұрын

I thought it was broken at first, made my game super bright. But then I activated hdr support and it worked. So absolutely don't disable that if you're playing hdr games on an hdr monitor.

@bigchungus4336 5 ай бұрын

Thank you this comment has been more useful than the guide

@transgirl2106 5 ай бұрын

@@bigchungus4336 yw glad it helped😊

@kirankamat9311 6 ай бұрын

Actually wanted to use this Frame Generation tech in competitive games more specifically in Valorant and wanted to observe the overall performance in it. My Specs are CPU - Intel Core i7 870 (4c/8t) @ 2.9 Ghz Locked ( 95 Watt ) GPU - GT 710 GDDR3 Variant (Overclocked while gaming only to Memory +220 Mhz and Base Clock to +430 Mhz) (30ish Watt after Overclock) Ram - 8gb DDR3 at 1330 ( at 9:9:9:24:174 ) Storage - Samsung Evo 870 (500 GB Variant) Overall in it. I do get around 70 to 120 FPS at most but then too much of the Agents abilities are going on at that time the games does lag up extremely. FPS does drop somewhere around 40 to 50ish for around 5 to 10 seconds. So Was Curious to see what kind of magic can this Frame Generation Technology can do on these really low end Graphic Cards, Can it really breath a new life in it ?

@DBTHEPLUG 6 ай бұрын

Won't you get banned when using this?

@TechPC-gf9pq 5 ай бұрын

Dont use in online games. Its bannable

@ghostyyslife 4 ай бұрын

Quick and easy way to make CPU intensive games(in my case planet zoo)much more playable. Thank you so much!

@gm_233 6 күн бұрын

Hello author, I would like to know if you use software to record the screen. After I enable frame insertion, I cannot adapt to the screen recording function of the N card driver.

@Zacatk23 2 ай бұрын

Thanks to that I am playing cyberpunk 2077 at 135+fps, never imagined that possible

@lellollo 7 ай бұрын

Holy crap, so it works in online games too (i suppose die to the game you were playing) :D

@Viettzz 6 ай бұрын

what online games did you try with this? thx

@lellollo 6 ай бұрын

@@Viettzz elden ring, the finals (just to try), lords of the fallen and offline games. You won’t get banned even if there’s easy anticheat

@raphacreations 7 ай бұрын

It doesn't work in any game I have, the app shows that I have like 60 fps but my games keep still in the normal framerate, as if its not generating frames

@raphacreations 7 ай бұрын

found a solution: reset every config of my Nvidia Control Panel to default and it works

@Hybred 7 ай бұрын

@@raphacreations could you also edit your original comment to include that info for people who don't read replies? Thanks

@namelesstrio932 7 ай бұрын

Set block half fps of your hertz screen example: my screen is 144hz u need cap your fps at 77

@Hybred 7 ай бұрын

@@namelesstrio932 144 ÷ 2 is 72, not 77

@WololoWololo2 6 ай бұрын

@@HybredLMAO 😂😂😂

@forcetac_br 7 ай бұрын

Best guide outhere! Thnk you!

@astreakaito5625 7 ай бұрын

Oh ncie RTSS will get Reflex, had no idea either, that's great news!

@introvertplays6162 4 ай бұрын

So just so that I understand it right: You cap your FPS to 72 and make sure that you reach these 72 FPS constantly then you activate FG? Am I missing something? Why would I activate frame generation in a game which I have locked to 72 FPS and in which I easily reach 72 fps without frame gen anyway? Just so that it is "more stable 72 FPS"? I thought I am creating 120 FPS out of 72 FPS or something.

@nyxelithias 3 ай бұрын

It doubles the amount of Provided frames. The reason you lock it at 72 is so that it doubles to 144 which is a common refresh rate in monitors. It is not a smoother 72 fps but rather 144fps

@introvertplays6162 3 ай бұрын

@@nyxelithias Yeah I was confused that the FPS counter does not measure these added FPS...seems to be only registered by the program itself.

@AtraxX98 Ай бұрын

You’re the wizard for the poor people, thanks for your magic, wise one!

@74age68 7 ай бұрын

I tested new LSFG new features on TW3, it turned out: With Gsync Fullscreen&Windowed ON, NVCP Vsync ON, Ingame Vsync OFF, LSFG ON VRR OFF Allow Tearing, RTSS FPS lock, Super Smooth.

@74age68 7 ай бұрын

Hint you need use windowed or borderless, input lag is ok with NVCP low latency mode.

@user-vw9nq9wd1c 7 ай бұрын

what about using this on top of dlss3.0 natively in 4000 card on top of fsr3.0 mod which work for all gpu not rtx one on top of AFMF by installing an additional rx 7000 card to same pc on top of internsic frame genrator in some LG monitors ?

@Heartbraker69228 2 ай бұрын

Bought this one to use specifically on games such as Wuthering Waves or Honkai Star rail, firstly uncapped my fps to max of 120 and then used loseless scaling, everything works perfectly and i totally prefer to play this way having 240 frames on my 280hz monitor

@YogiBhoy78 Ай бұрын

It works with Jade Empire while on full screen. Running the fmv cutscenes at 60fps (in my case), instead of it's usual 30fps.

@ViViX9999 2 ай бұрын

using frame generation with TOTK felt like witchcraft. RIP all 60fps mods for the emulator

@docnom 6 ай бұрын

Im using it with Neo Geo and arcade games that runs to 30fps to run it at 60fps and looks awesome

@GREGGROLLS Ай бұрын

What do I do when I get input lag when using this?

@GainingDespair 6 ай бұрын

I appreciate the guide, but I have mixed feelings about the software. While it does improve the frame rate, the main objective of achieving a higher frame rate is to reduce input latency, isn't it? People tend to notice latency in games not so much the frame rate itself (higher frame rate = lower latency). Some game engines suffer from significant input latency issues, even at high frame rates causing the game to feel laggy/not smooth, which can negatively impact the gaming experience. For instance, the input latency of 140hz monitor at 140fps is something like 6.5ms. If the software doubles your frame rate from 70fps (with a 13ms latency), but also increases input latency by 2-3 times (26ms-39ms) with frame generation, the overall experience should be similar to playing at 30fps kinda defeating the purpose in my eyes. The only real saving grace (and I mean this respectfully) which I can see is even though the frame gen increases latency it could in theory smooth out the latency similar to how gsync/freesync work. Both of these technologies lock frame rate, and screen refresh rate, however in turn it also locks the games latency per frame which has a smoothing effect vs random latency/frame time spikes through the gameplay.

@-Waves-777 Ай бұрын

How do you get the "Windowed Mode" option? its not there for me.

@kyledupont7711 6 ай бұрын

This works in vr! Not for the entire headset but for windowed games in big picture mode it does, I'm using big screen and playing retroarch game that way

@jaybeam1466 4 ай бұрын

RTX 3070. Followed guide to a T. Not working on Dragon's Dogma 2. Overlay disabled.

@timmyp6297 2 ай бұрын

Hey I hope you know about Nukem9 DLSS3 mod by now. I also have a 3070, and with the mod I can max PT Alan Wake 2 1440p. It works in everything, replacing DLSS3 with FSR3 and it is literally identical to 4000 series frame generation.

@DontKnowDontCare14 7 ай бұрын

Could be a god tier apps when lossless scaling manages to implant fsr3. I’ll be buying the apps even it cost more

@nyxelithias 3 ай бұрын

Pretty sure this will never happen as fsr3 needs to be integrated into the game by the developer. The only exception is via a mod but that still requires that the game has fsr2 implemented. Fsr1 is open source and is compatible with any game as its a glorified image sharpener hence why lossless scaling can implement it.

@charley199 7 ай бұрын

Does it work with VR games? and are there any additional constraints or different settings to make when using in VR? Also, is there a preferred way to capture and output to the VR headset (Steam Link, Virtual Desktop, Oculus AirLink) specifically for Lossless Scaling?

@matiascorrales2843 Ай бұрын

I tried and it feels a little bit laggy, maybe it's because I didn't set the half frame rate on my screen?

@Chobbito Ай бұрын

I'd recommend locking to a steady frame limit that you can achieve (hopefully half of your monitor 30/60/72), use the frame gen method to double/triple the frames, and also enable the screen tearing option. Sounds weird that last one but it seriously improves input latency to make it less sluggish and I'm yet to actually see any screen tearing and it makes a big difference to playability.

@roguemo 6 ай бұрын

thanks for the tutorial ... whatever disadvantages it has it is a great solution for everyone with older GPUs

@fadedlight8596 Ай бұрын

This works really well for kerbal space program 2 aswell as Minecraft to speed up generation aswell as ghost busters remastered!!

@MR.TOPHAT2007 Ай бұрын

So every time I use the frame generation and I only use the frame generation. I don't use the upscale or anything. It makes my game unlike absolute crap. I don't know how to describe it, but like I'll usually get like 144 FPS and then I'll cap it to 60 and then I'll turn on the frame generation and it makes it run at like 20 FPS with a bunch of artifacting

@ZenTunE- 6 ай бұрын

Pretty cool for controller games, on mouse it feels choppy. It's not the delay that is the issue but it's just stuttery for some reason. This goes away on a controller. I tested 60fps to 120 and 80fps to 160. Both with stable frametimes. For games with an inbuilt 60 fps engine cap like SOMA and the older Amnesia games, this actually does enhance the experience when you have that controller plugged in. So that's sick. I still haven't gotten the fsr frame gen mod to work in any games, wanna see how that compares to this. I'd assume this FG is pretty similar to the new AMD Fluid Motion Frames thing.

@txtungz2704 7 ай бұрын

So if my screen is only 60hz I still need to lock it at 30hz? how does that work?

@TenkaichiMeister 7 ай бұрын

Your screen should be locked to 60 and your game should be locked to 30 FPS

@xGaMErZzZPrOx Ай бұрын

No matter what i do i just get a better experience without frame generation. It uses like 100% of my gpu no matter the settings i use or the game i play. Fr im using the lowest settings and my gpu is only at like 20- 30% usage but as soon as i turn frame generation on it goes up to 100% immediately and my gpu goes up to like 85° C which is 10° hotter than it ever gets with normal usage. I can run a game at 144 hz and my gpu is at like 80-90%. If i turn the fps down and try to frame generate up to 144hz my gpu goes to 100%. So lossless frame generation uses more of my gpu then actual game generated frames lol. Also when i turn it on in game i cant even tell its on tbh. I tried the anime one while i was watching anime and that definitely worked

@stachutoziomal3655 9 күн бұрын

I love this program, i can play GTA V with NVE and have 165 fps. But i don't really know why if im scaling the game always zooms in, regardless of this switch below scaling mode

@superchimpinha 4 ай бұрын

If I play in windowed or borderless but keep the native resolution of my monitor, there is no need to use Scale Mode, right? In this case I should only use the LSFG like the way you put in the description in the Universal LSFG Guide. Or even if I run with the native resolution I get improvements using LS1 Scale Mode for example.

@venator9536 Ай бұрын

Im so confused... If i choose a lower resolution from which i will be upscaling from to my native monitor resolution, then what does the number actually change? You know I thought i play native, i select 2 for performance. But i only loose fps and my screen look like shit. Only lose lose

@Intrinsic16 Ай бұрын

How am i goona use this tool effectively i have a 240Hz monitor and a 3060. none of the games in need frame gen is going to give me consistent 60 fps. i cant decrease my referesh rate to 120Hz every time i boot up a game . will it be ok to use this tools FG without changing the refresh rate?

@radubalea4230 Күн бұрын

I'm guessing this is pointless if the game is running at 4K already,no fps improvements at all.

@Scarpheon Ай бұрын

This actually crazy. It feels illegal, like I'm supposed to be paying a monthly subscription for it lmao. Also this is off topic but will you be updating the parallax sounds pack on Modrinth to 1.21?

@eliaselhaddad5166 2 ай бұрын

so I play at 1080 144 Hz, what would you recommend as settings for Escape from Tarkov? (3D First Person Shooter) my goal is to maximize FPS while maximizing clarity

@KolmaniksTwitch 6 ай бұрын

Good vid and good guide my man, really everything what you said its 11/10 guide

@yasin0506 Ай бұрын

I tried rdr2 and it works , but spiderman remastered didn't work with it for some reason? ( frame gen )

@j7u4a81 2 ай бұрын

is there a way to take a picture of the upscaled game? whenever I take one it takes a screenshot of the original game not the upscaled version. thanks.

@SoFRESHandSoMJ 7 ай бұрын

How are yall getting a huge fps increase? I followed the instructions but when looking at the Draw FPS counter I am averaging 96 fps. Also when playing a game, I tried it with Cyberpunk and MW3, the gameplay doesn’t feel that smooth. For example, when I play MW3 with LSFG off, I could tell it doesn’t feel smooth. However when I turn off LSFG it noticeably feels a lot smoother.

@SoFRESHandSoMJ 7 ай бұрын

I forgot to add…. my specs is the MSI Delta 15 laptop with Ryzen 5800H and RX 6700M. I also used Custom Resolution Utility to set the refresh rate to 144hz

@Hybred 7 ай бұрын

See what FPS the game is getting with LS on first since it may cost a few frames, then set that has your cap and twice the hertz.

@SoFRESHandSoMJ 7 ай бұрын

@@Hybred I am averaging about 74 fps with the LS program running in the background and LSFG turned off. I set the frame limit in AMD Adrenaline software to 74fps and created a 148Hz refresh rate preset in CRU. And now testing back in Cyberpunk, the Draw FPS counter now says it’s averaging 99fps. Am I doing something wrong here?

@Hybred 7 ай бұрын

@@SoFRESHandSoMJ I meant test it with LSFG on, frame monitoring software like Riva won't capture LS frames so it should be fine. That's the FPS you should be capping. Also make SURE you're not setting a global FPS cap otherwise you're capping LS to the same framerate as the game which means it won't work

@SoFRESHandSoMJ 7 ай бұрын

@@Hybred okay I’ll try it out again 👍 But not gonna lie I’m still confused what the LSFG program is supposed to do or what it is initially doing to a game when activated. It doesn’t really give the game that “frame gen feeling” if you know what I mean other than it gives slight ghosting to a game like with nvidia frame generation.

@yshish5286 2 ай бұрын

I have triple monitor setup and using resize racoon to resize my screen resolution. Will this program work with resize racoon or I can use this Lossless Scaling program and able to use the same feature for resizing the screen plus the FPS booster? thanks

@omnistrife4207 Ай бұрын

quick question bro, do you know a way on how to video record the frame gen fps rather than the capped fps?

@RealParadoxed 6 ай бұрын

it doesnt open on steam deck

@gabrielnedu6367 3 ай бұрын

Does gpu usage play a factor in how fg works ? In Rdr 2 i get gpu usage in the 90% marks at 1080p xbox one x settings (gpu used is a gtx 1660 super). From other benchmarks i have seen when turing fg on the usage goes up significantly.

@caglarkorkmaz33 3 ай бұрын

very nice guide thank you so much

@pizzabtw1156 Ай бұрын

yup it truly goes to impact frames tho it decreases reactivity

@gigaguy8890 Ай бұрын

Okay so for fps gen, to use the 3x you have to set your fps to 1/3 of your refresh rate or only 1/2?

@nafosbfqeb 7 ай бұрын

I tried to use it playing Scum and The Quarry but I noticed games dinnt work well. The app was telling me that i got 144fps but not true at all.

@virtualpilgrim8645 2 ай бұрын

Scum is a nasty game, though...

@Sploof653 Ай бұрын

Just getting a black screen when I upscale

@CalmConcept 7 ай бұрын

Thanks for the guide, I'm using this in Elden Ring and apart from the minor artefacts it's working great! I'm struggling to get the Game Profiles to auto-scale on launch though. Is there a specific way we need to set up Lossless Scaling, or the game in question, to get scaling to automatically enable on launch and disable on close? I've enabled the auto-scale toggle and messed around with delays, but no luck in getting it to apply automatically.

@Hybred 7 ай бұрын

Join the discord and seek help from the community (steam page)

@CalmConcept 7 ай бұрын

@@Hybred thanks, will do

@shantonabsen2299 6 ай бұрын

Does that second method using only LSFG option at 1080p looks better than 972p 😮 (i mean for 1080p native resolution in any game with only LSFG on from which res does it upscale is it 720p or below)

@Patrick_AV 6 ай бұрын

Hi, i'm using framegeneration with MSFS2020. When I move my view, a big part of my screen isn't clearit's blurry. Do you have a tip/solution. I'm using a 1080TI and have capped my fps at 30fps. My screen is 60mhz.

@something4114 7 ай бұрын

If I have a variable refresh rate monitor can I just leave my refresh rate at target a lower fps?

@nyxelithias 3 ай бұрын

Yes

@Fild20 4 ай бұрын

I don't know why but everytime I use LossLess it just disable my ps5 controller even if it connect and previously working

@akizrxx 5 ай бұрын

If you upscale it, will it look like for example native 1080p and can you use the window method for borderless as well or reverse verca?

@KNIFEDEFIANT Ай бұрын

can you use this on games with 3rd party launchers like plutonium t6 (bo2)

@nealrahangdale1194 Ай бұрын

Bro i am not getting any fps boost and yes my game is set to windowed borderless i am playing rdr2 to be more convenient can u please help me

@NicolasSilvaVasault 6 ай бұрын

nah i don't get it, i tried fortnite, warzone and alan wake 2, and all 3 games gets less fps than it should, like fortnite ultra settings + ray tracing i get 55-65fps with frame generation, and i did everything you said in the video, but when i disable the tool, i immediately gained 20fps lmao, i get up to 84fps without this software, i'm not sure if i'm doing it wrong or just simply works better for lower end gpus

@Viettzz 6 ай бұрын

So you tried this with Fortnite and Warzone? and you didn't get banned?

@NicolasSilvaVasault 6 ай бұрын

you can't get banned with this, is literally an upscaling tool that works on a windows level not on the software itself, that's why is so terrible right now@@Viettzz

@AlexBell1991 4 ай бұрын

I use DLDSR to upscale my games to 1620p for a shaper image. Would it be possible to use LSFG?

@eduardedy322 2 ай бұрын

What is really annoying is that I'm loosing my cursor and cannot navigate in the menu

@uhZme 3 ай бұрын

Can you please do a guide for this for handhelds like legion go? I followed the instructions and games are running worse.

@raul1642 2 ай бұрын

thanks,works like charm

@celogh 4 ай бұрын

Bro, I'm trying to use it with fallout 4 but when the game windows resizes my hud get out of place. Any idea?

@itsthelepto Ай бұрын

When does one ever need to use the Nvidia image scaling over the others?

@StopaskingformynameYouTube Ай бұрын

This software simply does not work for me. I am trying to run games on a 5120x1440p monitor, and my 3070ti drops the games actual FPS down to sub 10 when i enable frame generation. Followed the guides and no matter what i do enabling this causes all the games i try to completely tank and run at sub 10 fps. I get worse fps with this software...

@rdbhoy Сағат бұрын

Does this work with dota 2?

@user-uq7bg9li2i Ай бұрын

Bru, fram generation is actully bad, cuz the picture that I am getting after scaling it is just to bad for some reason, or is it only cuz I am using it for minecraft

@per-sina Ай бұрын

this app not work in MWIII (call of duty) why ? FPS dont be change! can you help ?

@GameRider805 2 ай бұрын

My game runs at 60 but as soon as I upscale it starts to runs at 50 to 55

@JamaiiQ 28 күн бұрын

Scaling Types. Does it matter? Can I use 'AMD FSR' on an NVIDIA GPU?

@MC_Holocaust 24 күн бұрын

yes, amd fsr or DLSS, any of em

@Dullahan1989 3 ай бұрын

What I still don't understand is this... Can I use Loss Less Scaling frame generation along with the DLSS in game option activated? or I need to turn off DLSS in any game while using this tool? Also.. I found frame generation easier to use for me.. but I do not know if it's better to tweak with the upscaling settings? Can someone clarify me this?

@virtualpilgrim8645 2 ай бұрын

Please post your answer when you get finally got it.

@pinguzfy4954 Ай бұрын

why do i have to lower my monitor frequency to 120hz if i want to play the game at 60fps capped and 120 frame generated ? can i just not keep the monitor at 144hz and use the program to have the game be running at 120fps ?

@DrizzrGrael Ай бұрын

60fps up to 120 still good a 144hz monitor.Dont need the lower hz

@williamcrooksii9139 7 ай бұрын

I have a 3060 rtx with an i5 11600k. My tv is 60fps 4k. I run games on borderless mode and use framegen. I get a crap load of ghosting. I do have a constant 30fps on Monster Hunter World but its like mirrors all over the place. I tried in a few other games but just getting bad mirror effect like I am drunk. I do have msi fps counter up but that is all. You guys seem to have luck and I am doing something funky. In Lossless I have everything off and no upscaling so when I turn in it on its just the framegen.

@Hybred 7 ай бұрын

Don't use an FPS counter as overlays interfere with LS. Only use it to make sure you're hitting your frame target. Also try 60fps to 120fps. 30 to 60 results in very weird artifacts

@evolucion888 7 ай бұрын

You can't use FG at 30fps, does not work that way, you need to hit at least 60 for clear motion.

@tomaspesek2183 7 ай бұрын

Probably, because on my monitor 144hz work great, but not on my tv with 60hz, because star water artefact, but still playble And can play 4k @@evolucion888

@evolucion888 7 ай бұрын

@@tomaspesek2183 I used Unigine Heaven and Valleymark capped at 30FPS using Powerchill and then enabled FG with full screen without FSR and did looked and felt like 60FPS. Quite surprised 😲