Survival Knife Destroyed By Fire? Restoration Perfection!

Рет қаралды 108,348

2 жыл бұрын

I restore an old rusted knife burnt in a fire. You don't see this everyday, a knife that was destroyed in a fire. With my restoration tools and some elbow grease I restore this old burnt rusted knife.
If you have something you would like me to restore send me an email at business@lostandrestored.com
Watch Next:
I Restore This Old Rusted Knife - I've Never Seen A Knife Like This!
• I Restore This Old Rus...
I Restore An Antique Survival Knife
• I Restore An Antique S...
I Restore An Antique Hunting Knife - Shiny Restoration
• I Restore An Antique H...
I Restore This Rusty Knife Into An Amazing Dagger!
• I Restore The MOST Rus...
Old Rusty Knife Dagger Restoration - Beautiful Reveal
• Old Rusty Knife Dagger...
Antique Rusty Corn Sheller 1890's - Amazing Restoration
• Antique Rusty Corn She...
I Restore The World's Most Rusty Lock With No Key
• I Restore The World's ...
Make sure to Subscribe and hit that Bell Notification to see the next Lost & Restored video!
Subscribe: / @lostandrestored
We love restoring vintage odds and ends. What antique do you want to see Restored?
#lostandrestored

Пікірлер: 118

@allen1993100 2 жыл бұрын

What I appreciate in these videos is the understandable use of body language. It's easy to follow throughout the restoration process. Besides that, learning about Super Blue, rivets, and rust remover. Outstanding.

@geraldstamour1312 8 ай бұрын

Knife turned out dope AF, Lost & Restored!

@willieckaslike Жыл бұрын

Brilliant, nothing less. Thanks for sharing !

@kvnmg 6 ай бұрын

Super work ! I love this knife ❤ Good job Lost & Restored 👍 😉

@TheMamaz07 2 жыл бұрын

i could watch you all day...you make this looks so fun to do

@nordicson2835 2 жыл бұрын

I watch these posts with my son , he calls you " Mr Workbench " he was happy to see some " magic" today , great work on this knife .

@skcrary 2 жыл бұрын

Thank you, thank you, thank you…for completely submerging the piece in the rust remover! No weird lines on the finished knife! Thank you!

@jerryjohnsonii4181 2 жыл бұрын

Awesome restoration !!!!!!!!!!!!!

@robertomazzoni1955 2 жыл бұрын

Ottimo lavoro!!! Complimenti.

@johnalecsscalemodeling 2 жыл бұрын

Outstanding production value and interest. Well done as always.

@MikeVal1369 2 жыл бұрын

From damaged DIY Ka-Bar to the star of the Ren Faire! Good job!

@robertheinrichvonseyfenste267 2 жыл бұрын

Great result! Thanks for showing

@lisapino6739 2 жыл бұрын

Awesome restoration on this knife. The handle came out amazing. I enjoy watching your videos. You are quite the craftsman. Thanks for sharing.

@larrykelly2838 2 жыл бұрын

That is a great restoration.

@lawrenceforman6999 2 жыл бұрын

From Fire 🔥 knife 🔪 to Great Silver Knife 🔪 That’s fantastic job!!! Very shiny knife made by Toolmaker!!!!

@124adams Жыл бұрын

Great Job!! I like the wire wrap handle but if I may, might I suggest a change... how about silver with copper or brass?

@vinceianni4026 2 жыл бұрын

Beautiful restoration mister good job well done

@mskayla7747 2 жыл бұрын

Nice restoration. The new handle looks great.

@jomercer21113 Жыл бұрын

The original was rubber/plastic-covered stacked leather handle. My dad had one similar to it. You can buy kits with precut leather washers to make those handles.

@leesalyer8944 Жыл бұрын

Truly amazing

@oneshotme 2 жыл бұрын

It looks great and a wonderful job restoring it!! Enjoyed your video and I gave it a Thumbs Up

@lindalewis3955 2 жыл бұрын

Beautiful, great job!

@luisgallardo2084 2 жыл бұрын

beautifull job , my friend

@markbir7979 2 жыл бұрын

Outstanding job!

@PerpetualCamel 2 жыл бұрын

I like the oil dropper, it sounds like it's saying "oil"

@RestorationAustralia 2 жыл бұрын

Nice finish, well done. 👍

@some1funny28 2 жыл бұрын

What a great wired handle! Looks outstanding! I heard 'oil' again here!

@Gonza768 2 жыл бұрын

Love this custom handles, amazing like the others. Greatings, excellent work!

@requiscatinpace7392 2 жыл бұрын

I wish I had your skills!! Fabulous job yet again.

@chandramoulir4568 Жыл бұрын

Fricking awesome

@Nbstevens78 2 жыл бұрын

Ace pal..like it.

@georgebrown8312 2 жыл бұрын

Splendid work as always. I bet that knife is quite sharp as well. Well done.

@user-sv8fk3ff8u Жыл бұрын

Good very good 🌹🌹👏👏

@lucialima781 Жыл бұрын

Esse rapaz alem do dom Parece que ele tem mestrado em restauração

@alvaroaraujo8821 2 жыл бұрын

Gostei muito do trabalho!!!

@bobjoncas2814 2 жыл бұрын

...looks great, good job. keep safe...

@user-ku2oe4mg8b 2 жыл бұрын

Всю жизнь мечтал попилякать ножовкой, когда болгарка рядом лежит...

@ivanleterror9158 2 жыл бұрын

Great video as always but would have preferred back to the old school stacked leather. When new or resurfaced it looks so good.

@hello7533 Жыл бұрын

Filing down the nut in order to use weird spanners is a bit strange. 🤣 just use a normal 12 or 13mm Also, would be a nicer contrast to have a dark blade with the wire wrapped handle. How did you terminate the wire at the pommel end? Love the smooth/twist alternating wrap, looks great.

@ezequielsilva2709 2 жыл бұрын

Bom trabalho 👏👏

@dogboyendicott5211 2 жыл бұрын

Lol the old handle looked like fresh brownies🤣

@davidcox2264 2 жыл бұрын

Very cool.👍👍👍

@teacheme 2 жыл бұрын

Fabulous restoration. In my opinion your best one yet. Love the handle.

@Facetiously.Esoteric Жыл бұрын

That knife is ruined. Metal softens at high temps after tempering. That blade will snap at the first application of pressure. It had to be retempered, he didn't do that. You can see actual stress fracturing and scaling from the high temps at 4:44.

@rahadianaryo5979 11 ай бұрын

05:10 (looking on the knife's tang) "This is *quite the clump of brazing* here...😒"

@rahadianaryo5979 11 ай бұрын

05:27 (after filing the knife's tang) "Much better, now...👍😊 Let's *make a propel pommel* for this one knife right here...🔪"

@zou6492 2 жыл бұрын

Good Job 👍 Congratulations from Belgium ✋🇧🇪😉

@rikidozan553 Жыл бұрын

Nice

@thrashcore7 2 жыл бұрын

The handle covered in Wires Surprised me in the final part of the video 👍

@homedaily6570 2 жыл бұрын

I lice this alot, sank q 4 sharing! 😘

@tomswindler64 2 жыл бұрын

It looks like whoever made the knife spent some time on it to make it what it was. Good video,turned out nice.keep it up 👍👍👍😎😎😎

@billlindsey411 11 ай бұрын

Wow!!

@garlandtx10 Жыл бұрын

Few things, I get your videos are your artist expression and I appreciate that. From a time saving and efficiency perspective I would go with either a wire wheel or rust remover/vinegar over night. Not both and definitely not a wire brush to start would just take more time she. The other methods are pretty gentle in their own right. Files are made to cut in only one direction. Abrasive paper will cut in all directions, well except the paper backing...

@GT_Racer347 2 жыл бұрын

Sweet 👍🏻 👍🏻

@jt9498 2 жыл бұрын

Nicely done! Turned out great! Just a suggestion here: your 1 x 30 belt sander needs to be tighter. And a question: why do you have your bench vise facing backwards, with the handle on the inside of the bench?

@lostandrestored 2 жыл бұрын

The camera setup in my shop. I have a small space and can't get the right camera shot.

@keithfreeman2139 2 жыл бұрын

Just a question, I haven't finished watch but thought of something. Since it went through a fire, does the metal need to be re-tempered again?

@shubingopinath 2 жыл бұрын

yes

@keithfreeman2139 2 жыл бұрын

@@shubingopinath Thank you for the reply. It turned out beautiful looking. I wish I had your talent and equipment.

@pr0faker 2 жыл бұрын

Rehardened and retempered indeed, if it gotten above 400 degrees its temper is destroyed and you have a soft knife edge, which can still be sharp but wont stay that for long after a bit of use though.

@lihuensaavedra6752 2 жыл бұрын

Muy lindo

@cabinvibesebaystore8956 2 жыл бұрын

New sub ! Liked 🤩👍

@bobbertbobby3975 Жыл бұрын

great knife love the handle especially. I do have a question about how hot the fire might have gotten. I mean it doesnt look like the handle was burnt in too hot of a blaze but do you have any concern that the temper of the blade might have taken a hit? I do know that some house fires can reach pretty damn hot temps. so if this went over 450 or so..for any length of time. wouldnt you have needed to re heat treat?

@Nords555 Жыл бұрын

it wasnt hot enough to burn off the plastic or leather, the metal is fine.

@ericdonnelly5824 2 жыл бұрын

Another good job,,but the choice of the handle! Obviously the hand will sweat will make the handle abit slippery!!!!

@mohamedzulkifly8966 2 жыл бұрын

Was having thought that you would make the sheath for the knife.

@shubingopinath 2 жыл бұрын

വളരെ നല്ലൊരു വീഡിയോ ആയിരുന്നു

@00996580 Жыл бұрын

Como sugertaria el alambre al final del mango?

@890mikes 2 жыл бұрын

Did you harden and temper the blade?

@paulorth2251 2 жыл бұрын

Sweet looking pig sticker as we called them.👍😁🇺🇸

@Mylifelovingit Жыл бұрын

I would have liked to see the second wire done with copper

@shrug53 2 жыл бұрын

Great resto. What do you use to attach your vise to the bench? Some sort of threaded insert?

@lostandrestored 2 жыл бұрын

Yes, I have threaded inserts in the bench top to make it easy to attach and remove the vise.

@imamsantoso7232 2 жыл бұрын

Mantaaap sudah saya like coment dan subscribe y

@ryanmcgrath339 2 жыл бұрын

Great job bro. That link you sent me I couldn't work out how to use the site. I was going to send you a old lock knife that needs fixing the blade don't lock. I don't know if you remember me.

@user-gd9xg3jn6d 13 сағат бұрын

А темка интересная

@IAmFromTheTop 2 жыл бұрын

Can you use it as a file still?

@resatcan2047 2 жыл бұрын

Nice but very slow a work!!!😊👍

@poetymology9280 2 жыл бұрын

Wire sounds nice until you get a wire splinter in your hand

@RedneckForge 28 күн бұрын

👍

@qually100 2 жыл бұрын

Рукоятка ножа из проволоки-красиво,но непрактично...

@cassam2845 2 жыл бұрын

До такой хрени с рукоятью я бы никогда не додумался.

@PGoodmanCOG 2 жыл бұрын

Out of idle curiosity, how long did that handle take?

@lostandrestored 2 жыл бұрын

The pommel and wood were most of a days work. Wrapping the handle took a long afternoon- probably 3-4 hours, It looks quick and easy on camera, but keeping the wire straight and under tension was quite a chore.

@TheParkAttendant Жыл бұрын

The handle looks to be made of leather. The plastic looks to be tape that was wrapped around the handle.

@fahedq825 2 жыл бұрын

👍👍👍👍

@user-ke2wz1hj5w Жыл бұрын

Looks like this knife was made from a metal file

@harrygregory6227 2 жыл бұрын

the next handle and all others should ONLY use carbon fiber

@TempAccount358 Жыл бұрын

If it's made from a file, doesn't it technically become a shank ?

@Mitrofun1980 2 жыл бұрын

Ножик явно был обожжен намеренно, уж больно легко снялась гайка и резьба совсем не ржавая, да и само лезвие очистилось довольно легко

@hunterhayes6523 2 жыл бұрын

I was wondering if I could send you something to restore if you could possibly make a video out of it my dad gave me a katana set when I was younger but i only have one now and it’s completely rusted comment back on this if you’d be interested? Great work I honestly love watching your videos

@lostandrestored 2 жыл бұрын

Send me pictures of the Katana to business@lostandrestored.com

@steve.b.23 2 жыл бұрын

2:15 That sheep doesn't sound very well.

@harrygregory6227 2 жыл бұрын

i wooden use wood for the handle i would use carbon fiber

@juliebaker6969 2 жыл бұрын

So what was the point of staining the wood, only to cover it entirely with wire? The wire looked great, but why bother staining?

@lostandrestored 2 жыл бұрын

I knew that you would be able to see a tiny bit of the wood between the strands of wire, so I stained it ebony to contrast with the bright silver wire.

@juliebaker6969 2 жыл бұрын

@@lostandrestored ok, I guess that DOES make sense.

@ConanTheBarbarian. 2 жыл бұрын

When oil spilled sound like oil at @06:41

@georgepretnick4460 Жыл бұрын

Your power outlet is upside down.

@barefact7412 2 жыл бұрын

hey... that handle will tear flesh out of the hand of the user....even if he is cutting vegetables....

@Tatal.b 2 жыл бұрын

👏👍👏👍👏

@woltews 2 жыл бұрын

um hear is the thing , in the vast majority of cases the fire will draw the temper of the knife blade making it not hold an edge well, and re heat treating it in the vast majority of cases will require a way to not just make it hot but at specific temperatures ( think 540C not 555C or 520 C ) followed by tempering with similar requirements for exact temp control oit will not hold its edge

@MAJESTIC.CPR1 2 жыл бұрын

so you restored a rusty hamade knife made from a file that was in a fire

@mbeat28 2 жыл бұрын

That handle is not only hideous, it’s shape is all wrong for a practical blade.

@LBG-cf8gu 2 жыл бұрын

looks like kabar...

@jovanigonzalez8225 2 жыл бұрын

Do you have an email, I have a katana that needs to be restored

@lostandrestored 2 жыл бұрын

Yeah, send me pictures to business@lostandrestored.com

@doc585 Жыл бұрын

А зачем вы хорошую, деревянную ручку обмотали металлической проволокой? Это же совсем не практично. Или нож будет лежать на полке?

@stardusk1726 2 жыл бұрын

It looks like that that knife was made from a file

@daniellazarte7335 Жыл бұрын

Excelente 👌 trabajo felicitaciones!!! 👏👏👏👏 Quizás unos centímetros más delgado el cabo en mi opinión hubiera quedado mejor estéticamente. Sds desde Argentina 🇦🇷

@denismoskvichev3630 2 жыл бұрын

Проволка на рукоятке лишняя

@mikipask 2 жыл бұрын

se eliminavi quelle righe che fanno capire che il coltello è stato ricavato da una lima sarebbe ancora meglio

@minimaltrace 2 жыл бұрын

so you have a knife with a chopping style blade, with a sloping handle with nothing on the back to stop your hand from slipping right off when you chop into something, really smart here. *insert massive irony here* .. you should have just left the handle as it was, maybe with some wire diamond insets instead for grip, and made the back of the handle wider, but hey, im not a restorer, i just follow the laws of logic instead of my own ludicrous ideas on what might look fancy instead of functional.