Lower control arm replacement, seized bolt, worn bushes - Super pro offset bushes

Lower control arm replacement, seized bolt, worn bushes - Super pro offset bushes - HGT

Рет қаралды 15,226

4 жыл бұрын

Toyota lower control arm replacement.
After a few changes we took the fortuner in for a wheel alignment only to discover there was an issue. as it turned out the lower control arm bushes were worn out and needed replacing.
After talking to Toyota parts i worked out in the long run it would be cheaper to us an aftermarket complete arm set up. I ended up installing Super pro lower control arms with off set bushes. check out the video to see how.

Пікірлер: 23

@lachlanstill 4 жыл бұрын

That was awesome thanks heaps. Will need to do my fortuner soon too.

@ShoeysAdventures 4 жыл бұрын

Made it look easy mate! nice work 🤙🏻

@HappyGoTravel 4 жыл бұрын

Thanks mate, i got lucky only having to punch that one bolt.

@travel-warrior Жыл бұрын

Excellent video, loved the bleepin rooster

@HappyGoTravel Жыл бұрын

🤣🤣🤣 thanks mate ✌️

@arwadicfk9889 3 жыл бұрын

Respeck bro from indonesia, i like your life😊

@pablos.cargoe7101 Жыл бұрын

Great video, thanks. I appreciated the logic behind replacing the entire LCA as opposed to just the bushings, and the visual of worn out bushings. Glad to see your kid still has all his toes. Next time you do this, does he get to swing the sledge hammer and you hold the ball joint in place with your bare foot? 😃

@HappyGoTravel Жыл бұрын

Thanks mate. HAHAHAHA if that was the case i'd definitely end up with a broken bone

@KFed604 2 жыл бұрын

Did the seized bolts cause the arms not to flex and give a stiff ride?

@davidwigg8408 Жыл бұрын

The OEM bushes in the LCA's on my Prado are trashed after 60K km and I'm looking at the Super Pro LCA's as a replacement option. Any idea why your OEM LCA bushes were toast ?

@HappyGoTravel Жыл бұрын

My guess would be all the mud and water I drive through. They had a squeak for a long time before I replaced them

@carterstouring3009 10 ай бұрын

Hey mate How did you alignment look after this Was it a big improvement? I have black hawk UCAS and wondering if I get these lowers to help my alignment Cheers

@HappyGoTravel 9 ай бұрын

it was good if, anything it probably pushed the wheels out too far for the wheel offset i was running. the major benefit is you can lift the front higher with this combination

@carterstouring3009 9 ай бұрын

@@HappyGoTravel yeh Righto What size offset and tyre you got, im running 285/70/17 17x8.5 0offset done guard chop but no BMC just want a little more caster pushed forward but can’t get my alignment right without bushing my camber out Got the black hawk 1 deg UCA

@YotaSurfs 2 жыл бұрын

Do you have any squeak coming from the superpros?

@HappyGoTravel 2 жыл бұрын

I originally had squeaking. I put a reasonable amount of grease in these and then put the nolathane UCAS back in and found it had all but disappeared

@NewlandGolf 3 жыл бұрын

Awesome effort mate you've made the worst job imaginable look easy how lucky were u with the cam bolts

@HappyGoTravel 3 жыл бұрын

Dusty_ Roads_Aus hahahah yeah I got so lucky with the cam bolts

@georgesdesk 4 жыл бұрын

Nice work, that $600 bucks, is that each or the pair

@HappyGoTravel 3 жыл бұрын

George Zarafonitis sorry for the super late reply but it was for the set

@LewiDaKid 10 ай бұрын

So why is replacing the bushings more expensive?

@HappyGoTravel 10 ай бұрын

They were actually more expensive than the whole aftermarket arm assembly. And that was before even considering the cost of paying someone to press them in