problems with total scan transducer picking up at high speeds and the solution
Пікірлер: 75
@TRUONGSPORT11 ай бұрын
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzfaq.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
@805soung6 жыл бұрын
Awesome video bro, just bought a elite 12 ti. And it's giving me this problem. This video will come In handy.
@chrisfish19705 жыл бұрын
Realy good video! Great practical tips on setting up the transducer, very helpful!!
@brianboudreau60837 жыл бұрын
Thank you for taking the time to make this video.
@malcolmnuku68077 жыл бұрын
very informative and also entertaining video Otis .I like your style keep up the good work..cheers
@hollybrit098 жыл бұрын
it works perfect now it is very easy to pinpoint fish when using all 3 sonar, down scan and structure scan at the same time
@wino42 жыл бұрын
Very helpful video. Mine original transducer got whacked buy something when fishing in Mexico. Had to get a whole new bracket. Wasn’t sure how high to mount it. Now I know why I wasn’t metering at speed.
@darrylhenchie47655 жыл бұрын
Just got one. Thanks for the heads up on positioning Otis.
@martinj87324 жыл бұрын
Thanks for the assist. This issue has frustrating me to figure out on my ti7
@larrylazure42885 жыл бұрын
Finally a video that explains proper placement and is spot on. Thanks
@hollybrit095 жыл бұрын
Lol your welcome
@robbob48725 жыл бұрын
The instruction manual that came with mine said the same thing - I put it on and it worked perfectly...
@thejwchannel31376 жыл бұрын
Good on ya Otis howdy from Australia!
@damandany2k3 жыл бұрын
Same issue thanks for the tip!
@obscur1567 жыл бұрын
Sonar acting up when too hot,thats a big issue from Lowrance.I taught i was gonna buy that one but you are making me think twice before buying this sonar.Thanks for sharing that valuable info bud !
@hollybrit097 жыл бұрын
yes when the elite 7ti sits in the Sun it will stop working. it will not let you touch the screen anymore usually I will put a cold rag on it and that helps
@obscur1567 жыл бұрын
I will probably choose another unit without Touchscreen...I dont understand why Lowrance is selling something unusable...Regard
@malcolmnuku68078 жыл бұрын
very useful info thanks & cheers
@BuenaVistaMar6 жыл бұрын
Thanks me friend, so helpful for me you explanations .
@Keep_It_Loaded6 жыл бұрын
Thxs 4 sharing
@hulkhuggett5 жыл бұрын
Good tips
@hollybrit098 жыл бұрын
3/16 aluminum plate with rvt silicone and 3/8 stainless steel screws.
@basilkey29493 жыл бұрын
Great video. Just what i needed to know. Thanks ..I just got my elite 7 TI. I have no idea what transducer to in stall. Need one for ever thing the unit will do. Help
@ericdanish36776 жыл бұрын
I have just Purchased the same unit great video thank you for the tip....My biggest question I have with watching all the videos on the Internet...Am I supposed to level the transducer like you did in this video (with the bottom of the boat half in half out of the water) or do i level it with the water line on how the boat Sits in the water? any help would be greatly appreciated
@robertadams19848 жыл бұрын
Great looking bracket you've made, thank you for the video. How did it fish - have you had to make adjustments on it - do you lose bottom at speed.,? -Bob
@jeffresler22288 жыл бұрын
thank again
@Lear3560457 жыл бұрын
nice explanation i will confirm it installed leveled like you show with your straight edge. how from the most right end edge you installed the transducer ?
@bobbysmith38417 жыл бұрын
Ok I may not have been clear on this I was talking about something possibly striking it from the side if your boat was anchored are parked and the back end drifting around and a tree limb or rock hitting it .
@jeremystikka7 жыл бұрын
I'm having the same problem with my ti5
@jeffresler22288 жыл бұрын
good video what kind of metal is your bracket out of and what kind screws and sealent u done a hell of a job
@theoduff95173 жыл бұрын
Bruh 😉 thanks for the info I mean great info each 1 teach 1 😉 AMEN 🙌✌️💓
@fmadriga2 жыл бұрын
I have an elite ti7 unit but want to know how tight must the transducer be , mine moves a lot, do you have to let it move up when you take your boat out of the water or just keep it on the parallel way. Please end me a message
@donfrederick48257 жыл бұрын
Nice bracket and excellent video. I suffer from loss of sonar at plane as well. Can you add instructions in the description on how to make that bracket?
@hollybrit097 жыл бұрын
I will see what I can do
@midwestfishing1190 Жыл бұрын
@@hollybrit09 ❤
@billwest53303 жыл бұрын
What about transducer on trolling motor?
@1964krazyeric5 жыл бұрын
What happens if the transducer is mounted a foot lower than the bottom of the boat? I only use a bow mount terrova on my boat so speed is not an issue. I want to mount it on the bottom of my rudder I built.
@hollybrit095 жыл бұрын
I'm sure it will be perfectly fine as long as there's nothing obstructing the left or right side. It could possibly throw off the side scan being on a rudder .?
@bobbysmith38417 жыл бұрын
With the totalscan transducer being so long and sticking out so far have you had any trouble in brushy or rocky areas with the tranducer possibly breaking bracket ?
@hollybrit097 жыл бұрын
bobby smith no it still has one bolt on the other side so it can Flex
@smithkart6 жыл бұрын
I see you have the transducer mounted with wire to the front, does your side scan rear backwards? // I want to change my mount to the new style mount and wire has to run out the front.
@robertdaoud68376 жыл бұрын
you can adjust the way reads in your settings.so either way you rig is ok. hope that helps
@shake-n-bakebassin3 жыл бұрын
Hey your big moter don't block the side sonar? I got a jon boat and I just got a 7ti and I'm trying to figure out how to mount the transducer
@hollybrit093 жыл бұрын
It dose a little in shallow water with the motor trimmed all the way down
@chuckcregger85275 жыл бұрын
That was my question -- can you turn it 180 degrees without affecting transducer performance? From what you said I'm thinking you can. Thanks good video.
@hollybrit095 жыл бұрын
It works the same just flop screen
@scottmccrea95065 жыл бұрын
Does it mirror image the sides?
@snowismas7 жыл бұрын
I don't have the total scan version, but my downscan version is always in the sun, its never given me any trouble with heat.
@hollybrit097 жыл бұрын
is yours the touch screen version mine is Lawrence Elite 7ti
@snowismas7 жыл бұрын
Otis Pye Yes it's touch screen. It's the Elite TI 7". I only have trouble when the screen and my hands are wet, then it's hard to use.
@BassMonkey7 жыл бұрын
is that how your boat sits in the water when your ideling the way its sitting on the trailor
@hollybrit097 жыл бұрын
Bass Monkey yes I leveled the water marks on the side of the boat
@hollybrit096 жыл бұрын
Bass Monkey Fishing this video is all about not keeping up while on plane so idling doesn't really matter
@mizzouborn5 жыл бұрын
Some decent info but how do you know exactly the "shiny" line is when you're on plane?
@mizzouborn5 жыл бұрын
Follow-on - where is the shiny line in conjunction with the bottom of the boat?
@wish2fish376 жыл бұрын
Can't believe you have to put it in a coller either.Did you call Lowrance?I would have.
@lukemiller28956 жыл бұрын
Does your transducer pick up the outboard on side imaging when mounted in this spot?
@hollybrit096 жыл бұрын
Luke Miller yes but I only have to trim the motor up a little bit and it works perfect
@lukemiller28956 жыл бұрын
Perfect... thank you... I just bought an elite ti totalscan and my transducer won't fit directly in front of the outboard and I was worried about the interference.... thank you
@chadcarr32717 жыл бұрын
Just installed a total scan transducer. What a pain in that ass trying to get working on plane. There is nothing in front of it. Just rivets. Which you can't file down. I have dull grey Line even with the bottom of the boat. I get a rooster tail at high speeds. Sometimes lose bottom also. I have adjusted it up and down. Same results. Also. It's a elite ti 9". Like the unit. But nightmare transducer.
@hollybrit096 жыл бұрын
Chad Carr mine still loses bottom sometimes in saltwater not sure why
@dukman243 жыл бұрын
What kind of boat do you have?
@zachwalls4614 жыл бұрын
What boat looks like my 2010 tracker pro guide deep v
@hollybrit094 жыл бұрын
2015 Tracker Pro 160 mod v
@johnhorn78656 жыл бұрын
Sad that they had to add weld to create drag........ easier to add weight to nose ..or put trim fins on cavitation plate
@hollybrit096 жыл бұрын
John Horn you could put a hundred fifty pound person and a 50 quart cooler full of ice and beer in the front it would still porpoise I put a Davis XL whale tail on and ground the weld off now it works fine
@mattfoley90155 жыл бұрын
Did you make the plate or buy it as is?
@hollybrit095 жыл бұрын
I made it .
@Th3mast3r697 жыл бұрын
you lowrance guys have to put your damn head units in a cooler to use them on a hot day? LMAO im glad i chose humminbird
@John_D22 жыл бұрын
I've had more problems with my lowrance. I'm gonna sell it and get a garmin.
@hollybrit092 жыл бұрын
That's what I did LOL
@John_D22 жыл бұрын
@@hollybrit09 how do you like the garmin ? thanks
@hollybrit092 жыл бұрын
@@John_D2 my Garmin doesn't overheat and I'm on the same transducer for over a year I went through three Lawrence transducers
@John_D22 жыл бұрын
@@hollybrit09 thanks brother im def done with lowrance. thanks for the heads up.