James mate, truly incredible! Massive respect for that figure, and I also really like the fact that the bike looks dirty and weathered, but that the weathering is in-scale. It's super easy to go overboard but you've got it just right with this!

Genial Die detaillierte Bemalung des Kopfes und des gesamten Modells, in dieser Größe, ist unglaublich. 👊😎👍

Painting eyes on a 1/35 figure is not easy to do. You did really nice work with this kit. Very enjoyable.

Not only is the finished model amazing and the level of painting just incredible, the actual detail in the 3D printed model is just nuts! I do a little bit of 3D modelling g and printing and I know there is a fine line when it comes to super fine details and what the printer can achieve….so my deepest respect to the modeller and the printer that made this possible! Once again you have set the bar!

Brought that detail out nicely, stunning little model, really well done! 👍🇬🇧

Incredible James! That figures face I just had to pause the video and zoom in! Epic detail levels! You’ve really set the bar high now mate!

Wow, that must have been a satisfying build. Awesome result. Very enjoyable to watch 💥👋💥

Wow. Dude you’re just getting better and better. You should be proud 👊🏻

Superb subject and craftmanship. Loved the video and the classical "theme" music with plenty of nostalgia. Given all these elements, this is one the best modelling videos I've seen in a while, well done and thank you!

you did a awesome job paying tribute to an excellent kit ! well done

very nice and such an accuratley sculpted bike and figure to boot. excellent paint work has brought this to life.✌👍👍👍👍

Excellent work really enjoyed the build plus the face painting 👍

I don't know if this is your best, but this one is absolutely stunning!

Just wow...nuff said.!!!!

To quote the legendary Frankie Howerd, "I was flabbergasted! My gast has never been so flabbered" I've never seen such a well designed and made model with such accurate parts and the figure was simply amazing. Your ability to build and paint vehicles AND figures is beyond belief. Some can paint fantastic vehicles but their human models look almost cartoonish. You have that rare talent of being able to make and paint both to the highest degree. Regarding the bike, shouldn't this be the way in the future of model designing? Injection moulding is so "1950's" now it's about time the model making industry came into the 21st century. If they can just get rid of the visible layer lines then the models of the future will really be literal miniatures of the original item. Fantastic work!👏👏👏👏👏👏👏

Outstanding James!! That's wizardry mate. Thanks for sharing.

Really nice build. Those 3D prints are amazing. Superb brush control with the fine detail on the fabrics. 😎

Definitely one of the best builds ive seen you create this year! Super good work its paid off it looks stunning! 😮😮❤

Superb job, congratulations!

I really enjoyed the music on this video.

Well done James beautifully executed 👏

Good Job my friend! It is not just video it is like full movie! Great job!

I was clearly born forty or fifty years too early. The quality of that model before you ever did anything with it just blew my mind. Motorcycles in that scale have been something I've always avoided due to not wanting to go blind and crazy and frustrated with superdetailing.

A beautifully executed model and a superbly edited video with atmosphere. Thanks James! 🤩

Yes James. It quite probably is your best model yet. But I also think i's your best video yet. Great choice in mood music capturing the essence of 1917 very well. Loved it!

Very nice James, the kit and figure look amazing.

thats awesome very nice work indeed ! I need to ask Edgar to send me that kit is great ,as i told them before they need to make an 1/16 scale will be a killer kit !By the way a small tip because you have already uv resin to your hands ,when you want to remove some of the layer lines you can brush some of it especially if it is a flat surface ,cure it and you are done ! Works for me anyway and makes those layers less pronounced !

What a fantastic build and paint job well done I wish I had half the skill level to do that

Has the look of so many different textures - top level finish. 🦸

I have loved this build so much that I have ended up ordering the same kit from CSM. Your build will be the benchmark for to aspire for.

Greet bill. Really like the die Rama. You like the painting of the figure top-notch?Can't wait to see your next video

Hi James, you mentioned at the start, thst you hoped you could do this build justice, well I can tell you, you certainly have donebthe kit great justice, congratulations on a job very well done, best regards from a Kiwi living in Australia, Les

Absolute work of art, you have skills of note!!

Simply incredible!

Really cool weathering.

Wow. Amazing job!!!! Super skills. Thanks 😀

Lovely.

Great build! And the paint job wow! Now you should build his Fokker Triplane!

That figure is fantastic. Try as I might I still can't quite crack them like that yet. Really nice subject with the early motorcycle too. Funny to see it has both manual pedals and a drive belt.

The raw model is pretty amazing

Best Job Master !!!!!🏆

Lovely model and great job 👍🏻

What a great build. The detail on the 3D bike is incredible but unfortunately I cannot unsee the print layer lines.😇

Great job, just beautiful!

Fantastic job on the kit! I am building the Copper State standing RNAS pilot currently and the detail is impressive on it as well.

I think it looks amazing

pure class👌🏻

I think you did an amazing job. I would put you amongst the best figure painters I watch on You Tube. I am ok with the clothes but my face painting leaves a lot to be desired, but I think I need to focus on the better moulded figures.

incredible work

Very nice work mate

Stunning dude!! Tottaly looks like Matt from Model minutes 😂

one of the best I've seen, amazing talent you have...:)

Great build!

Beautiful. Very nicely done.

Awesome work 👌👌

Turned out really nice mate!

I would be afraid of breaking the fine parts just touching the model, lol. Awesome print!

very nice model and excellently done

Awesome ❤ you got some silky skills there mate👌

very nice!! good job!

Really rather good mate 😉👌

Nice job! But the printing layers are still quite visible - It's the only disadvantage of this model. The same problem with CSM Tiger Model H bike I built recently. That's why I doubt about purchasing their next bikes (but their planes and armoured cars are beautiful!).

Very nice🎉

🤝👍

Amazing work mate! The figure colour balance is phenomenal, you've blended everything really well. What thinning ratio did you use for his face layers? Looking forward to your next video

can we see you build a locomotive from dapol

These 'steps' from 3D printing are really visible. Shame CSM didn't manage to avoid them, because they charge a small fortune for this kit. Anyway and little bit of attention to details would be great move from their side. Same like in their platic models they omit some details tso later then can charge fortune for their' replacements'. Money is more interesting than customer satisfaction.