I'm gonna have my kid start watching you instead of Sesame Street from now on.

Simple instructions, someone that is pleasant\enjoyable to watch, what more could you ask for? Thank you!!

Awesome video. I have scoured KZfaq for something like this, went through 30-40 videos, and not a single one just gets to the damn point and makes things as plain simple as this does. Great job man.

Thank you man!! No bs just straight to the point. Subscribed!!

Thank you much for passing the knowledge! May the GOOD LORD Bless you!

why can’t I have a neighbor like you man. 😂 thanks for the info and laughs

The BEST and Simplest explanation EVER!!!!

Thank you so much for posting! I just tore my 5.3l down to replace stuck lifters, and your video helped so much in putting it all back together (the RIGHT way). I was ready to just slap the rocker arms back on, but felt something was missing - then found your video. Not only did I do it right, but have a much clearer understanding of what's all going on. Thanks !!!!

Thx brotha for simplifying this procedure everybody else makes something simple COMPLEX with their explanations

Best vid on this topic for a guy like me. Thanks for helping me through this hot rod hurdle.

Man I watched bunch of videos and couldn't figure it out! Until I found this video awesome thanks!

Easiest video to watch man! Others are 22-60 min long explaining this and talking in circles. Thank you for making it simple brother!

I’m new to the LS platform and your videos have helped me gather knowledge significantly. I just finished my motor and your channel has helped out tremendously. I can’t thank you enough brother!

Your channel is so underrated... you’re the man lol

You are a blessing from god lol. I did a complete afm delete using all your videos, new melling hv oil pump, new cam, new lifters, new pushrods, all new gaskets. And she started fine and running smooth as hell! Never attempted anything this involved and it runs great. Thank you sir, you are a life saver for sure.

This video made me a subscriber, couldn't be any more straight forward

im a newbie to this adjustment and i watched 3 other vids that couldn't get the point across but you nailed it for me thanks but i did think about doing more than one adjustment in firing order great info.

Best diy video with simple steps tackled my first ls thanks to this video

Probably the best instructional video I have seen in a very long time. Great job!

This guy " gets it " and shares quality information .

Best Straight forward explanation ,, yet

BEST how-to videos on KZfaq!!

Damn this brotha finally showed me the easy finally to adjust rocker arms and now I can even check the pushrod on my vette to see if they are bent. Thanks mang!

Best rocker arm video on KZfaq great break down

You know what? Fuck yeah terry I just cammed the Silverado and really needed a strait forward video on this you deserve more followers and likes brotha, can’t get any better than that I like it

short, sweet, to the point. Thanks man

Great Teacher Super Personality!

Hey Terry. Thank you so much! Just finished the lifters on my L99. It was my first time going into a engine. She idles and runs as smooth as ever now. I was 2 minutes away from screwing up the rockers but you didn't let that happen. Thanks!

Pretty straight forward, can't wait to hear it run.

Thank you for the helpful information and not blabbing on for 10 minutes about nothing. Great videos man.

I'm ready to buy my "It's your boy Terry" shirt now 😁

Terry should get his own TV show,he’s more entertaining than half the guys out there

After a few repeats I understand and am now ready to attack my head gasket. Thank you sir great explanation

U made it all make so much more sense

Thanks Terry! Love your channel man! I hear your voice talking when I’m workin on the engine! Lol!! Thanks 🙏🏻 and god bless from Texas!

best video on youtube by far explaining this! you sir just helped me torque down my rocker arms on my 00 silverado 2500.

Hey there, Terry. I wanted to give you much props and many thank yous for this simple straight forward how to on installing and fastening LS rocker arms. I am doing my first ever head removal to fix a stripe threading for my sparkplug and got stuck on the proper method for re-installing my rockers arms. Thank you so much for your video!

Great! Simple way to remember how to do it. It is easy to get mixed up by watching adjacent valve to determine where base circle is on the one you’re working on. Especially now with gen V stuff having opposite valve arrangement compared to LS

I like this man. Very basic and down to earth.

Now that’s how you make an informational video dude, bad ass trail blazer SS by the way. And thank you!

All the info you share will be helping me in the future!

You’re a beautiful human being for this video

If the "how to LS build guide", step 48 had just said, "install and torque rockers on the base circle, I would have never found your video. Great video, just finished mine up this morning. Thanks Terry!

Awesome video... I've been able to work on my TBSS engine just by watching your videos

you made me confident enough to do it all myself to my 5th gen camaro ls3. Going online shopping !

You're a lifesaver man, you've been a big help on my ls3 top end build

Just what I needed for my Ls Rx7 build. Thanks man!

Right to the point! As it should be!

You are great for the LS and car community in general, keep up the good work brother.

Thanks alot!!! Had a broken rocker bearing, installed the upgrade trunnion kit now it runs perfekt.

Super simple yet effective explanation, thank you!

Like music, nice and chill! Two Thumbs up.

I appreciate you dawg straight to the point no bullshitin around!

Thank you!

Thanks Terry!

Thank you for making it so easy man God bless you

Very useful and straight to the point information thank you very much

Great video. Very knowledgeable and straightforward... no bs. Love it. Thanks for the help

Awesome job explaining!

Excellent video!!! Thank you!

Very good teaching, thank you brother 🙏!

Thank you sir, I’m building my first 5.3 lm7 and this is helping me out alot.

You are good at this , that's for sure. Great job making this video.

Simple and straight to the point!!!!!!

Excellent video!

Simple, to the point, subscribed.

best video explaination

So simple. Thank you.

Thanks for the video your good guy. Nice to watch a learn with out all the cussing. God bless you

Love this guy work straight to the point 👏🏾👏🏾👍🏿👍🏿

Thanks Man Great explanation gives me confidence to do my heads myself

Your making me wanna do a full DOD, VVT & cam kit on my l99 Camaro myself lol

Thanks for share your knowledge with us very useful video.

Love the video man. You keep it to the point and keepnit entertaining. I'm tryna get like you 💪

Great videos and great attitude!

Great video man I love your step by step it’s better than most other channels I will be a long term subscriber thanks brother hopefully one day you have a full breakdown and build up of an LS motor with your steps as you did in this video 🤙🏾

You got yourself a new subscriber. This was my first vid I watched. Helped big time

I’m getting ready to rebuild my first Ls soon.

Perfect video just what I needed. Thank you

Excellent! Straight to the point with great explanation. You picked up a subscriber.

That's nicely explained, thanks 👍.

Awesome! Workin on a 3800 myself, but same valvetrain :)

You rock man, that’s the really easy way, thanks for make my life easy.

LS could not have found a better coverman!!!

Liked and subscribed, thank you, just got done installing a lifter and you made life much easier

Great advice, worked perfect 👍👍👍👍

Great video and information!

Love it man! 👌🏻

Pretty nice video you are the best bro.

I like your attitude. :)

Thank u for all ur videos

Good shit keep up with the videos I have learned a lot from you and your good advice on LS engines

great content! exactly what I was looking for.

You just saved me cash bro thank you!

This video is 🔥 Thank you!

Thanks for the help 👍🏽

Float like a butterfly, mule kick like an LS

Appreciate the video nice and to the point

Solid Info man, KEEP IT UP!

Thank you. This was an awesome video. Subscribed👍