here are my thoughts on the new can am xmr 1000, it has some issues and it is great in some areas - check it out!
Пікірлер: 295
@my1chris6 жыл бұрын
I love my Can-Am, but to be honest ill never buy another one. i got a 2017 outlander and it had the DPS recall. I spent 7-8 months not able to ride it. Can-Am would do nothing for the loss of riding time. Once they finally found a fix the way they implemented it (one repair at a time) the process was so slow. The way they handled the whole situation showed me what they really think of their customers. I'm a Polaris man now!
@caseytodd76326 жыл бұрын
You would be surprised, or maybe you wouldn't, at how often this exact same customer service experience has occurred.
@tristanburke23116 жыл бұрын
my1chris should have got a Suzuki older models are immortal
@canadaplace2be1765 жыл бұрын
They dont care about u man. They build plains trains. And u name it. There not going to stop and do shit for u. Look at this guy. He just buys and buys and buys. No job??
@mudinwithkaylee25565 жыл бұрын
I’ve had nothing but trouble with my canams but I still love them 😂
@Killzaze5 жыл бұрын
wait i got a outlander 2017 and i dont have that problem
@NOSAtvs6 жыл бұрын
I'd be curious if Can Am addresses the power steering issue. With the severity of what could happen, it should be top priority.
@johnfkennedy53544 жыл бұрын
NOS Atvs nos boss
@lightning92796 жыл бұрын
Thanks for the honest review. Very bad Cam Am. That much money for a product and these problems exist. Not worth the purchase.
@TheCheesewalrus5 жыл бұрын
my 2013 Outlander hasn't had any of the issues he's had and it's silly to assume that every machine is built absolutely perfect.
@outdoorlix87885 жыл бұрын
But the fun that you have with the machine is awesome
@DCLEMMS15 жыл бұрын
Almost brand new and already putting loads of $$$ in it? This ride is for the professionals who get paid to ride. I'd love to rent one for a day though ! I'm in a different class- 2018 Honda Rubicon. Same HP as a top end riding lawnmower.
@tristenthompson34455 жыл бұрын
My xmr 1000 has been through a lot. I still love it.
@revhead74306 жыл бұрын
put an air temp gauge in your clutch exhaust snorkel and you can watch your clutch temps
@anthonyfoster27843 жыл бұрын
Direction "V" shaped tires in Automotive are designed so the "V" takes snow, ice and water from center and forces it outwards to sides so it can exit tire. The backwards V in theory will "scoop" more mud but then has no were to get rid of it because tread is forcing it into middle. Backwards might work better for paddling in water.
@richystar20016 жыл бұрын
Things rode hard break... But you should get endurance from a performance machine... Otherwise you get something pretty with stickers and a pamphlet of specs that don't mean anything when your machine is broken down.
@pacificsunsystems76696 жыл бұрын
i would hate to be this guys salesman, for ANYTHING lol
@canamrider71954 жыл бұрын
Hey, man. Once you put on the shiny chrome gas cap, you became the man, man.
@Yippynutsmacker6 жыл бұрын
When you get in the really sticky tire grabbing mud that visco diff is actually a godsend. I know for a fact I would of broken a few axleshafts without it.
@PowerModzOfficial6 жыл бұрын
you bet - same in the roots
@rideswift6 жыл бұрын
I have a 2008 Outlander 400, 2010 Outlander 500 XTP, 2014 Renegade 500. Zero issues!! My Buddy just bought a 2017 Polaris Sportsman 850, he was telling me how it needs all electrical sealed with dielectric grease and the front diff housing replaced because they crack. With these new high performance engines, there are bound to be drive line weaknesses. These things are built as cheap as possible to get through warranty but still gain market share, that goes for all makes!!
@toddmclamb99796 жыл бұрын
Canned ham...
@gtm_guero38353 жыл бұрын
Braidon price??
@nakkisampyla44606 жыл бұрын
Gotta say, we use full plastic skid plate. 8mm thick plastic with No holes like aluminium plates. Slides over everything and theres No sticks or stumps cathing the holes on the bottom.
@stephanM56 жыл бұрын
he keeps calling it a bike..its a quad. This video has swayed me from ever considering a Can Am quad to own. As soon as I saw the sloppy play in the steering and the power steering with a mind of its own that was enough to drop Can Am off my list of quads to purchase.
@quig1984m5 жыл бұрын
Your the only person who ive ever heard speek about the tread pattern on the cryptids. Ever time I look at them I'm like why is the tread pattern backwards!! Haha
@caseytodd76326 жыл бұрын
I want SO badly to love Can Ams and I wish like hell I could push myself to buy one, but stuff like this is TOO unnecessary and happens TOO frequently. Step it up, Ham.
@sweatlodgegarage81955 жыл бұрын
Casey Todd i purchased a rear bumper kit for my 2018 and BRP only sent the bumper, contacted my dealer and the mounting brackets plus hardware isn’t included, brought it back and got my money back. might trade in for a polaris
@nick-dm3if5 жыл бұрын
Get the polaris sportsman high lifter or the sportsman xp they have fantastic customer service and look at the videos on them the can am just looks good but so many videos of them being broken they seem to only have 1 purpose and thats mud the sportsman is better and they are the same thing just without all the other junk and cheaper than a can am
@28crazydave5 жыл бұрын
Guys i've owned polaris 850 xp one 2009 and a 2013 , i had issues with the 2013 from new that were never repaired by the dealer i since traded it for a Can am xtp 1000r and i am very pleased so far. I recommend you purchase the atv that you think works best for you , not what you see on videos where guys spend money on there quad just because... enjoy your riding.
@jeremegomez30186 жыл бұрын
Double not the ball joint, fixed mine. Use to have the same problem
@PowerModzOfficial6 жыл бұрын
did it today!
@stschryer6 жыл бұрын
There's a pinch bolt on steering shaft to steering motor that needs to be checked too
@Banks20184 жыл бұрын
I definitely would like to see that tire swapping video you suggested. I flipped a couple dirt bike tires around just to get the full wear and tear out of them
@clutchitup85654 жыл бұрын
You shouldn't have to upgrade much on them they should be bullet proof built to last if they cost 18k$
@Erated786 жыл бұрын
Great vid Louise, appreciate the honesty as always. That steering has a mind of it's own. That is scary...
@MrGaryboyd6 жыл бұрын
I just ordered a new 1000 max xt. do you think I should swithc out the drive belt before it leaves the show room? Some of what I am seeing and reading makes me concerned I may have made a mistake going with a can am instead of a polaris.
@naps33866 жыл бұрын
I need my sunglasses from all the bright light reflecting off those white legs 😎
@akbuilder76265 жыл бұрын
I know Honda's arent as mean looking as Can-Ams but they do run.
@123keepitsimple975 жыл бұрын
Perfectly said. I like and have had Honda's, but unfortunately Honda doesn't make anything aggressive enough for big creeks & heavy mud trails. With my Honda's I was constantly having to use the winch ... I've got a can am outlander 850 now and I'm probably be getting the Outlander x mr 1000r soon.
@bearbait22216 жыл бұрын
IN ALASKA WE CALL IT CAN'T-AM AS IN OVER PRICED UNDERPERF
@blaynemacpherson85194 жыл бұрын
Call me curious what do you guys ride in Alaska?
@bearbait22214 жыл бұрын
@@blaynemacpherson8519 2011 Polaris 850 x2 LE on 28'' mudder inlaws with 5000+ MILES OF MOOSE HAULIN AND VERY DEEP RIVER CROSSING. I have run over the thickest willow patches with my Polaris my friend has an outlander it need a radiator after 10 min of real Alaska riding he is on rad #5 or 6 now and the littlest shit gets in and hole in rad. just shit design it feeds shit into the rad. I loaned my Polaris to a friend to build a trail it came back with bent radiator I could not figure out how he did it than i saw the trail he made he used spruce tree stumps with root attached as road base in muskeg every time u drive over it rolls stumps hes is a dumbass and the radiator has no holes. can am can only ride on trails that are mowed grass unless u bring lots of black pepper and jb weld
@blaynemacpherson85194 жыл бұрын
Mike Sidebottom Good to hear you are using it for some good. Haulin moose. Lol. I live in can am country. We don’t see a lot of others machines around here. We have tons of muskeg and mud. Some guys use their can ams like canoes. I like my can am I have not owned another atv. I have a feeling your friend is rough on machines and he got a lemon. Everyone has a preference in machines like they do in caliber of rifles. Moose hunters usually shoot the 300 win mag for moose or the 338 win mag. But then you get into the ultra mags which are just over kill. Depending on where you ride determines size of motor and brand. Saskatchewan Alberta 850-1000cc can am Manitoba 500-650 Honda polaris Kawasaki B.C. 500 cc Can am. You guessed it I’m Canadian. Lol. Is Alaska a Polaris state? Machine of choice up there? Like one you tuber says I’d rather be riding anything then nothing at all.
@bearbait22214 жыл бұрын
@@blaynemacpherson8519 I'm looking at new can am defender 6x6 . When i was a kid i loved BRP SKI-DOO than they started adverts showing light weight and i see sleds braking because there to lite than the next year they shave more lbs and just to ride in Alaska u have to add 20lbs of gusset plates or break in half and now when it hits -20f the gas stations are full for sleds on trailers that will not start BRP u have to heat the sled up to ride in winter ???. My friend is the slowest and ezest riding of the group his outlander just feeds every thing in to rad. For the 1 i loaned my machine 2 he is an ass 9 and could break anything. And up here we ride every thing the old honda cant be beat for long lasting but it beats u 2. for a cabin in the woods honda for long trail rides polaris thats me. OH and for over kill rifles there is no such thing in Alaska. I grew up with rem 700 .458wm and it is like a comfort blanket when a grizzly is talking some weird toughs trying 2 kill u for the moose u have just shot. But i do think ultramags are just gimmick and hydoshock the meat slower large slug work well and will not deflect on some twig. I like Canadians more than lower 48ers usa stuck up trash that come up here and make trails to no were for no real reason other than fuk shit up and leave bags of trash and shit every were. They shit in a bag than throw it any where and every were city-idiots shoot at me and scare moose away every year i have to put some ass9 in his place and they shit when some guy in camo and face paint pops out and yells thats not legal jackasss or stop shooting or i'll shot back jackass ive seen more fat city boys fall over running to there cars after shooting in my direction than i should. It seems people are getting stupider and even my old shooting range is now full of non backstop shooters getting recorded shooting rapid fire in there tactacool gear?? and sending bullets in the woods were kids ride there bikes (the back stop) is the trail head just dum people get shot all the time and i might be 1 some day with all the dum moving up here every year more dumb. I hope it is not this way in canada too. I might be a brp lover again soon i dont like there advets for all the plastic gimmickry and plastic doors for like more than 3000$ every acc they make is so over priced it is nuts and replacement parts are 2--3 times the price of a polaris parts but i do like there 6x6 polaris dropped the ball in work machines lately. So if brp can drop all the city boy acc like a removable makup box for glove box?? only city boys need makup and a sound system on they atv just dummmmmmmmmmmm . nice to talk to another skeg rider and can ams as canoe i would like to see this hope u and yours stay well sorry for rant and i cant write for sh#$
@bearbait22214 жыл бұрын
@@blaynemacpherson8519 I forgot to say polaris is good for hauling moose the 850 scares moose away. I just started hunting on late 80's 350 yamaha bigwheel better on gas and wont scare moose. it can haul moose my friend used 1 in th 90's before it was stolen and burnt that 850 with 28 mudder inlaws will pull I pulled my trailer with camp and moose a older 6x6 that broke with low hanging trailer with another moose on it and the polaris pulled all night on skeg it did melt some plastic near the exhaust but man she pulls
@dan2396 жыл бұрын
From what I hear getting used to working on it.
@Rokonroller Жыл бұрын
I’ve got a 16 1000X & hard to turn over when hot?? Pain in the you know what Is my starter bad ? Was slow cranking out of tge box
@My17A5 жыл бұрын
I had three Outlander 650 Xt's....2007, 2010 and a 2011 XTP....problems with all three. Had two grizzlies and a Brute Force since 2012....not a single issue.
@momor_____26905 жыл бұрын
brute and yamaha = you good for 5 years no problem and more
@jacobtilley91975 жыл бұрын
My17A Yamaha and Honda two of the best 4wheelers
@Mpebbles532 жыл бұрын
I had my CanAm ( Outlander 550 v twin for 3 years and the replaced the fuel pump 4 times and still didn't get it right. And they wouldn't give me another on to replace the Lemon they sold me. I ended up trading in for a Polaris, and I love it. Screw CanAm and there product they Don't stand behind.
@ronniefoster15244 жыл бұрын
I clicked on the video cuz i thought it had 8 tires 😂. Am i the only one
@fidaulhaque99324 жыл бұрын
I too feel that 😅😅
@JL-th3qh6 жыл бұрын
I can tell how well you take care of your "bike" by how clean and organized your shop is....sorry, I can't blame canam for these issues...take care of your stuff and it will return the favor.
@PowerModzOfficial6 жыл бұрын
Jason L when you create the 32 hour day ill clean my shop. i guess i could clean and not edit vids....the issues with the bike are not limited to me...people who take better care of their bikes than me are having the same issue. feel free to stop in and help though:)
@rockytopvfl83506 жыл бұрын
So cause the shop isn't spotless and that means canam can't be to blame for a poorly clutched machine, no front locker, out of phase drive shafts, terrible rear diffs, etc..... Wow
@fixinjets5 жыл бұрын
How did you fix the steering play?
@enrique23595 жыл бұрын
Shop looks clean to me , always people hating , just got an xmr 850 wish i woulda went with the 1000 now haha nice vids man! Love my can-am
@justindarnold91905 жыл бұрын
2019 renegade xmr 1000... fucking beast .recommended putting a steering stabilizer from cecco.dont understand why the xmr doesn't come with the Rad kit only the snorkel
@julesdussault1593 жыл бұрын
There’s no way I paid that much money and have to work on it now I’ll stick to Honda
@PowerModzOfficial3 жыл бұрын
Good call honestly
@steveblair90852 жыл бұрын
I am looking at getting a 2022 can am. Can up put up links to upgrades that you do.
@lifebehindbars39414 жыл бұрын
I had the tie rod / pitman arm come loose on my 19 850 xmr. Have done a exhaust, fuel tuner and Dalton clutch kit. They are awesome machines but far from perfect.
@absoluteunit40283 жыл бұрын
looking at the thumbnail, you should've put duallies on it while ya had it lol
@MrShaniqua424 жыл бұрын
Are the wheels you’re using on the can am factory size ? I need tires for mine and was thinking of a 30x10x14 cryptid
@keepnethdawkins36014 жыл бұрын
Why spend so much money on something that you have to pit more money into just to enjoy.they should be ready out the gate for how expensive they are.
@PowerModzOfficial4 жыл бұрын
Exactly, not worth it looking back at it.
@destinhook38263 жыл бұрын
i think it really boils down to being apart of the hobby. no matter what most of us buy and what factory options it has, we are going to spend money making it our own unique unit and better.
@HondudeTeamMudhogs6 жыл бұрын
Good video. We were oddly surprised about how well the Cryptics worked also.
@edmitchell91825 жыл бұрын
Where did you get the aftermarket air box cover I need one that seals good ?
@Marine2111usmc2 жыл бұрын
It’s a rjws
@stevenfoisy62602 жыл бұрын
Is there a video on the snorkel kit you have installed on your xmr? I have the syatv kit installed and am having a few issues with the pod popping loose and I like your removable hose clamps up top to get under that bezel.. I mocked mine up with black rtv for now and am seeing what I want to change before I glue it permanently. Thanks in advance!
@PowerModzOfficial2 жыл бұрын
no they wouldn't let me video - they are weird as heck. dont glue it - use rubber pipe connectors.
@stevenfoisy62602 жыл бұрын
@@PowerModzOfficial trying to figure out a way the bezel will come off if I stick to the way the syatv kit is I have a 45 under the plastic which makes it almost impossible to get the bezel off
@benjamin.25junkie573 жыл бұрын
I just got to 1700 miles on mine and the hadle bars have just started getting slack in them,but the most issue's is the belt get a clutch kit asap!!!!!!!!!!!!!!!!!!!!!!!!!!!! I have the gold 2019 xmr outty 1000r
@rishadwilkes24764 ай бұрын
you figure out a fix for the tire rod ?
@flacracker46495 жыл бұрын
Did you ever find out what cause the steering issue my 2018 renegade xmr has the play in it about a inch movement both ways before tires move it’s been in shop 3 times an they have no answer for me replace power steering unit an tie rod ball joints any info would be appreciated thanks
@David-dw4kc6 жыл бұрын
HEY BUDDY. were is the best place to buy accessories for my new 2018 XMR 1000 .LOOKS just like the one you have.
@randommemechannel60663 жыл бұрын
A friend of mine has a dps problem. It just says it and goes into limp mode. It doesn’t have any real problems with the steering but it says something is wrong. Pls help. It was ridden for less than a year and wasn’t even taken into mud. Has not had a wash since the purchase and still looks brand new Sooooo.
@joepriest4626 жыл бұрын
Curious as to where you got that billet air box cover
@johncolosio67646 жыл бұрын
yea nice bike when you do all them great mods that's when the axles start snapping!! are you upgrading them?
@corycoulter79676 жыл бұрын
Doesn't matter what brand you buy,the skeg is hard on shit.
@orlandosalinas18844 жыл бұрын
My friend has a xmr 1000 2020 and his problem with the steering is it shows dps low on his cluster but is it a sealed unit what do you think made that warning light come on??
@alastair71286 жыл бұрын
with your steering issue, i had new king quad and thought my power steering was acting up and jerking me off trial, turns out it was the outer end of cv font binding randomly
@UBAYBE5 жыл бұрын
Looking to buy a used atv.. Was thinking yamaha. RELIABILITY IS #1 for me. I noticed you are. In the Ottawa area. Any recommendations for used atv? Mostly for plowing and moving things around the property, with occasional trail use. Was considering all season tracks. Not planning on going swimming with it.
@ericc15995 жыл бұрын
Sylvania mino.....Buy a Honda!! Get a rancher or foreman 4x4. I’ve had a Honda foreman for bout 9yrs and had no issues....none! Only thing I’ve done is changed the oil and put gas in it! Oh I did hav to replace the battery after like 7yrs....I use it to plow snow,hunting and trail riding...it has like 1500miles. Trust me they last forever!!!
@markwalker92366 жыл бұрын
I have a 2016 renegade xxc 1000, what belt do u use. I think I scene on 1 of ur videos that u use the x3 belt, if so year and model?
@jacobgrounds80515 жыл бұрын
I'm looking at getting a 16 XXC also, have you had the steering issues or any other problems?
@mjethier5 жыл бұрын
BRP is a recall in itself. Pretty doesnt mean reliable.
@johnwilliam66386 жыл бұрын
Nice video where did you get the air filter cover from good idea to have a rubber gasket instead of a foam one.
@PowerModzOfficial6 жыл бұрын
I sell them
@jjsmith17376 жыл бұрын
Have a 2017 thats had a recall for power steering since last dec. dealer just got it fixed yesterday. Seems to be recurring issue...
@newjonwayne3 жыл бұрын
anyone know if can am fixed the loose steering issue on the new outlanders that he's talking about? I had an old Honda that the steering nut would come loose after a hard trail ride and id always have some play in the handlebars and I hated it.
@wildwhiskeywolf81985 жыл бұрын
I have the same atv but a 2015 model. So ITP Cryptids 30x10x14 will fit without rubbing? Or do you have a lift?
@SkodzGaming4 жыл бұрын
nothing wrong to improve it but stock air intake is high enough for most people lol, no reason to go beyond 2 feet deep. You are not supposed to try crossing a lake on an atv lol.
@tanectanec85665 жыл бұрын
So Polaris is a better purchase for its price??
@MrBlayneo6 жыл бұрын
Did putting the rjwc exhaust help with the heat issues these things have? I’ve got a 2016 outlander xmr 1000 an you almost can’t ride it in the summer time because the heat from the exhaust will burn you an melt the plastics.
@PowerModzOfficial6 жыл бұрын
The tuner helps.
@grunx_12026 жыл бұрын
so what quad should i get for hill clim trails and winter rides is the raptor 700 good one?
@robertchandler29664 жыл бұрын
So what size are the new tires that are an actual 30" ?
@Marine2111usmc2 жыл бұрын
No
@freed147605 жыл бұрын
I’m late to the party! Aren’t bigger grippy tires worse for the CVT?
@bratosin15 жыл бұрын
Yamaha and honda nr1 , they never break
@catjackoff-road8555 жыл бұрын
I had 2 sportsman’s with tons of trouble. So I tried can am and don’t have near the issues.
@jakehruby81675 жыл бұрын
What do you recommend for new shocks to get better ride and more then the 3in of travel the fox shocks give you?
@keystoners20074 жыл бұрын
Elka
@randytwilson54734 жыл бұрын
Tell that dude, ain't nun on his hands🤣🤣🤣🤣🤣🤣👏👏👏👏
@antdx3165 жыл бұрын
What's w/ the handlebar play? I assume straight line performance sucks?
@outdoorlix87885 жыл бұрын
I grease this foam sealant with waterresistance grease. And it works fine :D
@thomasgallagher43063 жыл бұрын
Love you and miss you And hope you and miss you 💖💗 day and get some food and get some sleep 😘 lol 💓 ok you have to go back on the girls and back to the girls are in the girls are going to you on the girls 💓💓
@hnuggets66386 жыл бұрын
How about my kingquad 700 there is a small hole under engine by water pump oil coming out
@user-qc8em7ge9e5 жыл бұрын
I love POLARIS.
@freed147605 жыл бұрын
For $30,000 that’s way to many issues..
@TheKaoTicMaN5 жыл бұрын
30 thousand? LOL theyre about 18 buddy
@freed147605 жыл бұрын
They start at $21,000
@BuiltNotBoughtBNB Жыл бұрын
Lmao I just bought a 2023 canam renegade xmr 1000 and it was 18k so.....
@freed14760 Жыл бұрын
@@BuiltNotBoughtBNB my reply was 3 years ago. During Covid n chip shortages
@xmrpgh2446 жыл бұрын
Do you have the rjwc split duals, stacked duals, or single on the back? I just put on the full system with split duals on mine and kind of nervous about getting them both underwater. Next to the same machine with a stock exhaust at idle it seems like there is way less pressure coming out. Any thoughts or experiences with them submerged
@PowerModzOfficial6 жыл бұрын
split duals and love them! same pressure loss it seems....did it with stock as well
@mikealley25966 жыл бұрын
Hey I just bought the RJWC shifter but the base rubs my plastics bad. Any tips on how to keep it from rubbing
@PowerModzOfficial6 жыл бұрын
ya = dont thread it on so far:). crank the nut up and tighten it up
@markyrocks695 жыл бұрын
Itp dual beadlocks.. super sweet
@canadaplace2be1765 жыл бұрын
Kripits are not 30" there 28ish and not 9 wide either. Ffs junk. I payed 20.000. And another on a maverick 800 trail. And a 2016 dodge 52.000 so im broke
@trevers4ever5 жыл бұрын
stock cryptids from can am are 9" on the fronts
@constructiontech19706 жыл бұрын
Louy did you do a video on your snorkel install??
@phm144 жыл бұрын
Blow a diff yet?...just did a search for "Can Am XMR 1000 problems", and looked at sources that were not fan boy sites. These things fall apart, and Can Am gives the finger on warranty. Check out the 1.7 average rating. Consumeraffairs rating, full of frustrated buyers. I think I'll stick with my Grizzly...I have enough headaches, and don't like setting my money on fire ;)
@REBELRIDERS6 жыл бұрын
Honestly I wouldn’t mess around with just a clutch kit on a XMR. I’d go with full QSC STM clutching
@PowerModzOfficial6 жыл бұрын
I try everything
@REBELRIDERS6 жыл бұрын
PowerModz understood but the can am factory clutching is less than adequate. And quiet different than Polaris clutching Polaris clutches there machines extremely well and respond well to clutch kits. if its with a stock primary, you are wasting your time. The stock primary is flawed just by design. The inside sheave only is driven by the crank and outside sheave just goes along on the ride. BIG flaw, you smoke belts like crazy and you get lots of slippage. And the other big thing is that you CAN NOT tune stock clutching to shift out rpm, That is where the engine makes the most power at. With a clutch kit you can not tune to shift out either. And if you can not do that, then your leaving hp on the line you will not see on the rear wheels. Primary needs to be a aftermarket primary before you go to a heavier stock secondary spring. This is done for the tuning of that aftermarket primary. Mostly for bigger tire machines that will see more mud then faster trail riding.
@lawrencewilson81076 жыл бұрын
When you ride do those snorkels get in the way of your eye sight giving a tremendous blind spot? Because I was thinking of get a set of those snorkels.
@PowerModzOfficial6 жыл бұрын
no I dont really notice them. let me know if you want a set we sell them. thanks for asking
@mb012695 жыл бұрын
@@PowerModzOfficial Im looking for your caps(gas_air) and snorky kit 2015 1000xtp
@PowerModzOfficial5 жыл бұрын
@@mb01269 no problem are you able to email us through out contact form? thanks!
@randywestbrook59866 жыл бұрын
Because I'm trying to figure out about witch one I want but I want the best one
@keepnethdawkins36014 жыл бұрын
Randy, I personally think that they all have issues.They are all money pits.
@susangiggie79965 жыл бұрын
Hi PM , thanks for helping me decide not to go with the Canned ham. Not hatin. Just saying.
@dhooter5 жыл бұрын
I paid 3 grand for my Kawi Brute 750. Front locker V Twin I have ITP Mud Lites on it. Damn near a tank goes anywhere I have the balls to go
@logpile13186 жыл бұрын
How would one of those Elans do in the skeg?
@PowerModzOfficial6 жыл бұрын
hmm, pretty great!
@iohteneratateniongoodleaf15136 жыл бұрын
Also a tuner installed for my RJWC:
@REBELRIDERS6 жыл бұрын
And with that torq locker I have a feeling you will be needing some new axles soon
@racksdeepoffroad89696 жыл бұрын
Bowsandbucksoutdoors but a true 4x4 will get you out off so much more
@REBELRIDERS6 жыл бұрын
Racks deep off road that’s true.
@PowerModzOfficial6 жыл бұрын
I break everything locker or not
@kodybyrdarmwrestling17676 жыл бұрын
Till your read end gets water in it and the warranty won’t cover that 800$ pile of garbage because “it’s not designed to be in mud and water” they sell you that as an xtreme mud bike but god forbid you actually use it for that.
@urban86445 жыл бұрын
Next time buy 700 grizzly need no update
@outdoorlix87885 жыл бұрын
Boring
@sollco14 жыл бұрын
They already make what you are turning that into, it's called a jet ski !!!!!!!
@KnownSender16 жыл бұрын
Great video guys
@garysgarage36696 жыл бұрын
First time watcher here. Great video
@rangerbill94096 жыл бұрын
great vid.. seems like deja vu though......
@tristanburke23116 жыл бұрын
Don't like big quads because they're too heavy I like small quads 300 Fourtrax is my daily driver
@randywestbrook59866 жыл бұрын
Would you rather have a can am renegade x mr 1000
@PowerModzOfficial6 жыл бұрын
im liking this outlander - ill try the renegade next year of maybe a shorter outy
@riot28936 жыл бұрын
"I beat the shit out of my bike, but here's the problems I blame on can-am" Love it
@PowerModzOfficial6 жыл бұрын
Riot not at all ill admit when i cause issues...but ill also point out manufacturer defects...im a big boy.
@blaynemacpherson85194 жыл бұрын
do you have video of you riding the xmr1000 with all the mods done?