LuBan for making large models manageable on a small printer

No video

LuBan for making large models manageable on a small printer

Рет қаралды 22,124

5 жыл бұрын

On today's show Technical Producer Bryan Baker steps in and shows us how to us LuBan. LuBan is a software that allows you to take models that are way to large for your printer and cuts them up to fit any size printer.
LuBan: iiuufigtt.wixs...
Resources:
You can now help the channel with Buy Me A Coffee @
www.buymeacoff...
Consider supporting my efforts to bring you Entertaining and Educational content by using my Patreon link:
/ thefirstlayer
FACEBOOK GROUP - I do 2 Facebook Live Streams on this page each week. / thefirstlayer
Richard Cleveland on Social Media:
KZfaq: / mrrichard6440
Instagram: / cleveland_iam
Facebook: / richard.cleveland1
Twitter: / cleveland_iam
Website: richardclevelan...
Thanks to:
Spool3d @ www.spool3d.ca
Want to send me something for Mail Monday?
The First Layer
#230, 11929 - 40th Street SE
Calgary, AB
T2Z 4M8
--------Cameras and Gear Used To Shoot This Video ------
My Live Streaming Setup
COMING SOON
This VIDEO was EDITED with Adobe Premiere on a PC.
This Live Stream is streamed using vMix HD and sent out using Restream.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
"Funkorama" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons....

Пікірлер: 36

@SuperMeastwood 2 жыл бұрын

OK, I'm confused... there's no "module" method under the mesh / LuBan menu.

@guidancebeats 2 жыл бұрын

same for me ,

@primewelderprimewelder1551 2 жыл бұрын

@@guidancebeats yep mine the same

@craigmatthews4264 2 жыл бұрын

just go mesh > cut > then the method should be "modular cut"

@escultormariopitanguy 2 жыл бұрын

Amazing content! Congrats! Keep up the good work!

@BenEBrady 5 жыл бұрын

Good job, Bryan. LuBan pricing has been set and released. Basically, it's $12 / year up to 5 years for $60 and $120 for a permanent license.

@BryanBakerXBrav 5 жыл бұрын

Thanks Ben! I'm seeing $20 for the first year. I plan on reaching out to the dev to see if I can get a trial license to look at all the features in the app. The actual app had a lot of features but no documentation, so I can't fully determine at this stage if the value is reasonable.

@BenEBrady 5 жыл бұрын

@@BryanBakerXBrav yes, they've apparently changed it slightly from the original announcement.

@jakefuller79 4 жыл бұрын

300$ permanently now! 🤕

@minnesotamaker1846 5 жыл бұрын

Nice Video. Thanks Bryan

@shadowind9856 2 жыл бұрын

hey whats the tolerance should i put in to give a good fit and but not impossible to get in mine are at default which is 0 but i know that that probably will not fit i could use the help as soon as possible

@TomohawkInsanity 10 ай бұрын

Question. So in order to scale a marvel figure to a 6 foot tall figurine from a standard sized STL, do I scale it up in Luban, or in another software?

@DerekMatthews 5 жыл бұрын

Cool video great information.

@jakefuller79 4 жыл бұрын

Rock on man i appreciate it

@bondjames_bond4005 3 жыл бұрын

super cool vid! im printing a lifesize jabba the hutt would i still select mm or would i go to inches? thanks :)

@mikeymclachlan9506 5 жыл бұрын

Great video:)

@3DRundown 11 ай бұрын

Trying this for the 1st time in ages. "CUT" is greyed out... No "export parts"

@poofdagger551 2 жыл бұрын

so i know this video is older but my experience with Luban/cura is that luban does its job but when i put the file in cura it says its not water tight and i need to "fix" my model. I haven't found one print i can scale up to full size and its frustrating.

@monster_eh3938 2 жыл бұрын

my LuBan does not have modular

@northernmetalworker 5 жыл бұрын

Good video. But audio is shaky.

@BryanBakerXBrav 5 жыл бұрын

That's on me. The gating was aggressive. Hopefully it's still clear.

@monoham1 3 жыл бұрын

sorry why does my version not have the option for module? i want to buy it but i dont think it is working like this anymore...

@evavoo 3 жыл бұрын

Yeah i cant find this option in the software anymore either :-/

@evavoo 3 жыл бұрын

oooh its under mesh ---> cut ---> modular now :)

@leahgorospe485 2 жыл бұрын

@@evavoo thank you!

@TKTrooper 3 жыл бұрын

You didn't really show the results. Those printed pieces looked terrible and did not look like they would go together or create a decent looking larger model. I certainly wouldn't waste money on this slicer based on this video

@JGDeRuvo Жыл бұрын

There is no module option.

@Magic3DPrinting 5 жыл бұрын

Guess I expected the software to allow you to scale a piece to a large size before cutting it up...

@aryez91 5 жыл бұрын

If you enter a new value to either one of the axis in the Lu Ban process>Input>Model Axis - it will scale it uniformly. Press Enter

@michel1975de Жыл бұрын

!!!Attention!!! To all they are new into Luban3d: The "cut" has moved to menu Mesh/cut!!!

@theGermanPrintingNerd 5 жыл бұрын

YEAH I have that Program too :-) I have Documentation for it LOL

@acethekid999 5 жыл бұрын

You should have made a puzzle and put it together on camera

@MCINTOSHINT 5 жыл бұрын

I'm pretty sure it takes a small model and prints it large scale. Show how to do that please.

@KurtisJoseph 2 жыл бұрын

Dayum! The "module" method is no longer on the options list. It is still easy to cut, but then you have to be able to scale it properly from your slicer. Like the cut pieces show up in cura. Just the size of a lego.

@3DRundown Жыл бұрын

It's under MESH/CUT now