Lucas Mo1 L Magneto rebuild

Рет қаралды 18,875

2 жыл бұрын

2 Magntos stripped and rebuilt.
I'm no expert with Magnetos but you may be interested to see one stripped and rebuilt.
There are quite a few guys on KZfaq who have the knowledge and skills required to carry out a full restoration, check them out, I did.

Пікірлер: 43

@MotorcyclesandArt Жыл бұрын

Thanks for investing the time and effort to create this video. It really helped me out. THanks!

@500dbd34 Жыл бұрын

Thanks for the comment, glad you found it useful. Cheers B

@bryanbsa8094 2 жыл бұрын

Almost therapeutic watching a Master at work! 😃 Another fine job from our friend from across the pond!

@500dbd34 2 жыл бұрын

Thanks for the comment,always appreciated, cheers B

@syebuttle8619 7 ай бұрын

Thanks Brian I am just on with mine. I have the exact one for my 1956 Ariel NH 350. Top job.

@500dbd34 7 ай бұрын

Thanks for the comment, good luck with yours. Cheers B

@raseeth6674 2 ай бұрын

😢super work from india

@singhkarm6520 8 ай бұрын

Good work

@retromechanicalengineer 2 жыл бұрын

Very nice job Brian. I've never had a motorcycle magneto apart so it was interesting to watch. Best wishes, Dean in Oxfordshire.

@500dbd34 2 жыл бұрын

Me to, glad you enjoyed it. Cheers B

@davidclapham1066 2 жыл бұрын

It's always good to see the master at work, thanks Brian. PS. I did as you advised re fitting main bearing (casing in oven, bearing in freezer), and it practically fell into place, no bother at all :-)

@500dbd34 2 жыл бұрын

Thanks for the comment Dave, glad you enjoyed the video, hope your bikes coming along Ok. Cheers B

@davidclapham1066 2 жыл бұрын

@@500dbd34 Bit of two steps forward one back re bike. I had to re-strip engine in order to solve a weird whirring noise, which was caused by a worn main bearing outer washer. Which, in turn was caused by a worn breather collar locating pin. Nearly there now :-)

@vijaywaingankar8352 Ай бұрын

Good work sir.india

@thra5herxb12s 2 жыл бұрын

I've serviced a few of my own over the years, and you cant beat a new condenser for getting a new lease of life out of a tired mag.

@500dbd34 2 жыл бұрын

I agree. Cheers B

@chrisdunham7169 2 жыл бұрын

Nice job fella. That's given me the confidence to tackle a rebuild on mine so I can get riding again :)

@500dbd34 2 жыл бұрын

Glad you liked it, good luck with yours. Cheers B

@UPTHETOWN 2 жыл бұрын

Thanks Brian, very enjoyable

@500dbd34 2 жыл бұрын

Thank you, cheers B

@ianlawrie919 2 жыл бұрын

Superbly educational 👍👌

@500dbd34 2 жыл бұрын

Thanks for the comment, cheers Brian

@hunterjamison4808 2 жыл бұрын

It’s great watching your utube videos, thank you so much! So your new spacers eliminated the old large shim spacers? Do you mind adding the name and contacts for the armature rebuilds? Are the new condensers a stock old style type buried in back internally? I’ve seen new style that bolt on the front but never bought one. I was surprised finding out that the bearings must be mounted inside paper gaskets to eliminate the electric flow or is it grounding out? I’ve purchased some and they offer different thickness gasket material . I’ve never known which thickness of that to put where? Perhaps that’s standard in all magnetos but what a design! Thanks again for your all your efforts, very inspiring help for working on great old bikes.

@500dbd34 2 жыл бұрын

Hunter, thanks for he comment, when I stripped the Mags I noticed thin shims under the inner bearing races at both ends as well as a full size thin shim under the end plate at the points end. I played about with different shims (trial and error) until I was able to eliminate all end float. Still not sure if this was the correct way to go but it worked. The company who rebuilt the Magneto were in Preston, Ribblesdale Auto Electrics Ltd., they rewound the armature and fiited a new condensor, (old style) with a 2 year guarantee. Cheers B

@Biokemist-o3k 11 ай бұрын

That unknown now sure looks beefy and has a great spark!!! I am a new subscriber and I want to see what is inside a Lucas Magneto....Thanks.

@500dbd34 11 ай бұрын

Thanks for the comment, glad you enjoyrd the video

@davidatkinson3887 Жыл бұрын

1st class demo

@500dbd34 Жыл бұрын

Cheers, glad you enjoyed it.

@wakbreng6161 9 ай бұрын

Sir, I have question. 1. how to take out slip ring 2. How to check amature using multimeter? Tq

@mervinro0 Жыл бұрын

Hi Brian, Didn't you have to charge the Magnet since the coil was removed, also the whole cleaning process etc which usually makes it weaker every time the coil gets removed?

@500dbd34 Жыл бұрын

Thanks for the comment, One of the magnetos had a better magnet than the other but I never changed either of them. I wasn't aware that cleaning made the magnets weaker. either way both Magnetos are working well with bright blue sparks. Cheers B

@chrisrobinson8980 Жыл бұрын

Hi, great video. Could you please tell me where you got your magneto parts from ? Regards Chris

@500dbd34 Жыл бұрын

Hi, most parts are available on line or Ebay, the bearings are available for any bearing supplier, the bearing insulators- Ebay. Check out Dave Lindsley, he keeps most parts for the MO1. Good luck Cheers B

@chrisrobinson8980 Жыл бұрын

Thanks Brian

@melbinthomas1659 2 жыл бұрын

Where did u get the condersor

@500dbd34 2 жыл бұрын

The condensoe was fitted when it was rewound.Ribbledale Auto Electric did that for me.

@motown1703 Жыл бұрын

Where did you purchase your spare bits?

@500dbd34 Жыл бұрын

Hi, the bearings are made for magnetos and area available from most suppliers , the insulators are available on EBay as are other parts. Check out Dave Lyndsley who can supply most of the parts you will require. Good luck, cheers B

@500dbd34 Жыл бұрын

@@motown1703 Dave Lindsey is probably you best bet, he can supply all the parts you may need.

@stevewebcord 2 жыл бұрын

Fgood vid except you shouldtorque the nut on the slipping clutch so a kickback doent damage the dynamo, think it should slip at 7ft.lbs if memory serves me.

@500dbd34 2 жыл бұрын

Thanks for the comment, never stop learning. Cheers Brian