Quick tip: use a lighter if you wanna get the drying process faster but be careful you might burn something if you don't pay close attention

Super helpful video!

Your are getting better!

Thanks a lot for the life hack!

helped me a lot! thanks so much for the tutorial^^

thanks worked great

Do you need to put the lube? Because i cannot find it in my country

Lucas Decker can i use a paint thinner?

I dont have lighter fluid can you suggest any cleaner for bearing of yoyo

Another cool way to dry your bearing after you get it out is to take an edge of a paper towel and put that corner into the bearing. If you do that a few times each side it gets dry fast!

So I have some throws that sounded like the damage did. Do that indicate it's dirty

TYSM FOR THE LIFE HACK

Is there anything else I can use if I don’t have lighter fluid ?

What else besides lighter fluid can I use.

very very very good

Hi Lucas (can I call you that?) I just had a few questions: -I feel as if the Wedge may be a bit similar to the Sugar, is that the case? -would you prefer the YYF damage or the normal ND?

Can i use plastic jar

Getting the C clip out of this size A bearing is impossible for me. I’ve had this yo-yo for 4 years and I haven’t been able to take the C clip off once. I’ll try it again but with the life hack.

Quick question! My bearing is rather rusty, does this clean rust too?

Can you use nail polish

Thanks for the life hack! I have poked my finger several times trying to remove bearing shields. Nice shirt btw

Guys please help I bough the lighter fluid but I don’t know how to get rid of the lighter fluid after

Bro when you dis that washing

What if I can’t remove the bearing?then what?

What if i use wd 40?

Hey there Lucas can I use the lighter fluid multiple times?

I'm tired 🥴 i cant find lighter fluid or mineral spirits or acetone i only have 70% alcohol and if I want to order thin lube the shipping is double the price of the lube

2023 I started yoyo I love yoyo

But what you do after you used the lighter fluid?

I removed the bearing things and the bearing balls just came out and I can't fix it so now it is dead

any time you need to chuck/hold/wrench on a surfaced part you should wrap it in something to protect against chuck marks/plier damage. I prefer to use rubber bands, toss one around a bearing or an axle and then you can use pliers w/o damaging anything. brass chucks for a vise can work as well or wood blocks that are soft wood so you can grab w/o damaging. GL everybody

Les Gooooooooo

Can i use alcohol instead of lighter fluid?

Yes, insta-link for the uninitiated.

Hmm, this video seems very similar to a video done several years ago by yotricks!

can i use wd40?

You teaching how to clean bearing. But Old school yoyos you don't open cause inside built better.

Hmm, this video seems very similar to a video done several years ago by yotricks!