luckfox pppwn program at github
github.com/0x1iii1ii/PPPwn-Lu...
PPPwn-Luckfox-main.zip
The SSH program
drive.google.com/file/d/1pLik...
MobaXterm_Portable_v22.0.zip
Goldhen copy to root of USB drive
GoldHEN v2.4b17.3 GoldHEN_v2.4b17.3.7z copy to root usb EXFAT format
github.com/GoldHEN/GoldHEN/re...
Luckfox offical page
wiki.luckfox.com/Luckfox-Pico...
RK Driver Assistant
files.luckfox.com/wiki/Luckfo...
AT PC run type control
then choose
Control Panel \ Network and Internet \ Network and Sharing Center -Change Adapter Options
plug luckfox to PC with USB A to C cable (data cable)
Right click property set IP / Subnet mask
172.32.0.100
255.255.0.0
MobaXterm Connect to
172.32.0.93
root
luckfox
decompress / Drag and drop to MobaXterm
PPPwn-Luckfox-main rename to PPPwn-Luckfox
cd PPPwn-Luckfox
chmod +x install_NAND.sh
./install_NAND.sh
Choose version
Choose off after jailbreak
Choose pppwn or pppwn ipV6
===what you see inside MobaXterm ===================================
root@luckfox roo]$ cd PPPwn-Luckfox
root@luckfox PPPwn-Luckfox$ chmod +x install_NAND.sh
root@luckfox PPPwn-Luckfox$ ./install_NAND.sh
★ NAND ★ v1.1.0
by: github.com/0x1iii1ii/PPPwn-Lu...
credit to:
github.com/TheOfficialFloW/PPPwn
github.com/xfangfang/PPPwn_cpp
Please select your PS4 firmware version:
a) 9.00
b) 9.60
c) 10.00
d) 10.01
e) 11.00
Enter your choice (a/b/c/d/e): e
You have selected firmware version 1100. Is this correct? (y/n)
Enter your choice: y
Do you want your luckfox to shutdown after successfully jailbreak? (y/n)
Enter your choice: n
Please select the pppwn executable you want to use:
a) pppwn - a normal stable release for some PS4 models
b) pppwn_ipv6 - an update IPV6 which compatible for all PS4 models
Note: if your PS4 won't success with "pppwn", Please use "pppwn_ipv6" by redo installation again using cmd "./install.sh"
Enter your choice (a/b): b
You have selected the following settings:
PS4 Firmware: 11.00
PPPwn executable: pppwn_ipv6
Shutdown after jailbreak: no
Are these settings correct? (y/n): y
install to NAND completed! rebooting...
root@luckfox PPPwn-Luckfox$
Network error: Software caused connection abort
==========================================
if you choose wrong or want to change option
connect MobaXterm to run it again
cd PPPwn-Luckfox
chmod +x install_SD.sh
sudo ./install_SD.sh
=======================================
if you want to reset the luckfox to default
please refer to other tutorial
• Luckfox PPPwn jailbrea...
=======================================
Does it run faster without SD card
I have test and feel same speed
Pro
Not require SD card it can save you a few buck
Con
IF u delete the folder PPPwn-Luckfox it cannot run
require flash the internal memory unlike sd card u can format
u need to press hold boot button and flash the image
a tutorial to flash the memory will be given soon
===FAQ from offical site=============================
USB Recognition Issue
Upon receiving the development board, it's common to encounter issues where SocToolKit fails to recognize the USB device. Below are some common troubleshooting methods:
Ensure successful installation of Rockchip's DriverAssitant (recommended for Windows 10 or Windows 11).
Disable antivirus software when downloading the flashing software:
When downloading the flashing software, it's essential to disable antivirus software as it may inadvertently harm some configuration files, leading to SocToolKit being unable to correctly recognize the USB device.
Use a high-quality Type-C cable:
Selecting a high-quality Type-C data cable is crucial. Many user experiences suggest that a poor-quality connection may lead to poor contacts, affecting SocToolKit's normal recognition of the USB device. Ensure the use of a high-quality Type-C cable to enhance connection reliability.
Check if the device is occupied by a virtual machine or mobile assistant:
Ensure that no other programs such as virtual machines, mobile assistants, etc., are occupying the USB device. These programs may prevent SocToolKit from accessing the USB device.
USB HUB compatibility issues (rare):
In some cases, USB HUB compatibility issues may cause SocToolKit to fail in recognizing the USB device. It is recommended to directly connect to the computer.
If after thorough investigation none of the above solutions resolve the USB recognition issue, please contact customer support for further assistance.