PS4 Jailbreak  retroarch on ver 11
6:21
LuckFox Jailbreak PS4  ver 11
3:03
Пікірлер
@ndt7350
@ndt7350 11 сағат бұрын
After JB, my PS4 is PS4HEN instead of Goldhen. can you help me ?
@GameConsolefish
@GameConsolefish 7 сағат бұрын
@@ndt7350 if your ver is above 9 Download lastest goldhen Reboot with new usb it will override
@MadzsDeals
@MadzsDeals 4 күн бұрын
I connected my Luckfox Pro/Max to PC via USB but it does not show the option Remote NDIS based Internet Sharing Device on the Network Settings
@GameConsolefish
@GameConsolefish 4 күн бұрын
maybe u not have a driver read the description try the RK Driver Assistant / or replace with another usb A to C cable
@MadzsDeals
@MadzsDeals 4 күн бұрын
Help please, thank you! I have a Pro/Max Luckfox and I connected it to my pc via USB but it does not show Remote NDIS based Internet Sharing Device on Network Settings
@shanegereaux5386
@shanegereaux5386 4 күн бұрын
Little Help as stuck on this step toward the end - I'm receiving "Network error: Permission denied" when using MobaXterm on connecting to my Pro/Max when using remote host - 172.32.0.93. What am I doing wrong?
@GameConsolefish
@GameConsolefish 4 күн бұрын
Maybe USB cable cannot detect. /. Missing driver to connect I have update the description it contain the rk driver and offical page you can try the driver from offical page
@shanegereaux5386
@shanegereaux5386 4 күн бұрын
@@GameConsolefish the Luckfox LED does blink on the board with the cable which was also the cable with what I flashed the board with but I’ll try a different cable.
@jefflynn333
@jefflynn333 3 сағат бұрын
I am having the same issue. My Luckfox does blink red though.
@leesullivan5449
@leesullivan5449 8 күн бұрын
chmod: pppwn_ipv6: No such file or directory Getting This At The End And Its Not Working Any Ideas?
@GameConsolefish
@GameConsolefish 8 күн бұрын
The upload file not success
@ZOKO59
@ZOKO59 8 күн бұрын
Its work for 11.00 ? Thnks
@GameConsolefish
@GameConsolefish 8 күн бұрын
Esp work for ver9 if u are ver11 use pppwn
@ZOKO59
@ZOKO59 8 күн бұрын
@@GameConsolefish ok thanks, i have buy an raspberry bi 3 for auto launcher goldhen
@eduardoserratoz8500
@eduardoserratoz8500 10 күн бұрын
thank you a lot, it really helped me
@GameConsolefish
@GameConsolefish 10 күн бұрын
You're welcome!
@tushiwarashi
@tushiwarashi 13 күн бұрын
it automatically made a second attempt how can i configure that? am using an orange pi it does work but it only attempts 1 time only… if it fails the exploit it turns off and will never redo the exploit again
@GameConsolefish
@GameConsolefish 13 күн бұрын
@@tushiwarashi the default is auto retry No value to config retry
@Silemthhll-gd3kf
@Silemthhll-gd3kf 14 күн бұрын
It says ps4 not accessible
@GameConsolefish
@GameConsolefish 13 күн бұрын
Pc side may have antivirus / firewall block My nod32 block the connection
@Silemthhll-gd3kf
@Silemthhll-gd3kf 13 күн бұрын
@@GameConsolefish thanks it actually worked
@TheChameleon2008
@TheChameleon2008 14 күн бұрын
Its slower because its failing and needs more tries it seem. Mine works fast as hell and almost when i boot into the ps4 menu its done.
@hsp1316
@hsp1316 14 күн бұрын
Luckfox mini vs pico plus vs pro
@sukhee5
@sukhee5 15 күн бұрын
this works 11.50V? or only works 11.02?
@GameConsolefish
@GameConsolefish 15 күн бұрын
PPPWN luckfox Currently support PS4 version: 9.00, 9.60, 10.00, 10.01, 11.00 it does not support 11.5 / 11.03
@GameConsolefish
@GameConsolefish 8 күн бұрын
Not work on 11.5 / 11.2
@MiguelPalma-gq4xd
@MiguelPalma-gq4xd 16 күн бұрын
there is a difference perhaps the time?
@GameConsolefish
@GameConsolefish 15 күн бұрын
Time / price / skill
@pepegotera6147
@pepegotera6147 16 күн бұрын
I think you are wrong. Start ps4 with luckfox connected and you will see the difference.
@hsp1316
@hsp1316 16 күн бұрын
Nope. Even if lan is connected on startup still it's 1 min. Sometimes mine takes 3 minutes also. Those who are on 9 should go for esp32-s2 mini only. Saves a lot of time.
@pepegotera6147
@pepegotera6147 16 күн бұрын
When PS4 system finishes loading, the goldhen magically appears most of the times. That cant bo done with esp32.
@hsp1316
@hsp1316 16 күн бұрын
@@pepegotera6147 I think you are not aware it can be done. Only a small edit in the index.html is needed to make goldhen load automatically. But it's ok, I can sit in my couch away from the tv and can be done remotely. No need to be near the ps4. I consider that 'automatic'. Even if I have to press 2 buttons, it is still faster than pppwn.
@hsp1316
@hsp1316 16 күн бұрын
@@pepegotera6147 kzfaq.info/get/bejne/ra-Xn6V_tZmccY0.htmlfeature=shared
@hsp1316
@hsp1316 16 күн бұрын
@@pepegotera6147 goldhen automatically loading? What is wrong if we need to press a button? Even if we need to press button, it is still much faster than pppwn. Also I can do all this on the controller so I consider it "automatic". By the way, in esp32 goldhen can be made to load "automatically" only a small edit in script is required.
@TheDeejay87
@TheDeejay87 18 күн бұрын
hi, i have the pico max 256mb, after doing this now the luckfox shut down after fews second, something to do for this don't turn off ? thanks
@user-ow7no3eu7q
@user-ow7no3eu7q 18 күн бұрын
Me too
@GameConsolefish
@GameConsolefish 18 күн бұрын
Something wrong on nand suggest u rest it to factory default. U can find the video in my chanel or description also show the official site to reset
@md_ez
@md_ez 18 күн бұрын
10.1.1.1/admin.html
@blueonegameing6811
@blueonegameing6811 19 күн бұрын
Hey does we have to connect with lan to luxfox pico
@GameConsolefish
@GameConsolefish 19 күн бұрын
On PC side only USB connect required On ps4 side the luckfox need to connect lan to ps4 and usb for power
@WhiteWayneProd
@WhiteWayneProd 19 күн бұрын
cap
@aaroncanaleta3956
@aaroncanaleta3956 20 күн бұрын
Remote side unexpectedly closed network connect? On mobaxterm
@GameConsolefish
@GameConsolefish 20 күн бұрын
May need a factory reset
@muldavika3346
@muldavika3346 21 күн бұрын
Cool.Thank you so much bro for video and link.
@GameConsolefish
@GameConsolefish 18 күн бұрын
Always welcome
@bretsampson5980
@bretsampson5980 22 күн бұрын
Got it to work after installing Rockchip Driver Assitant 5.1.1 for windows
@leesullivan5449
@leesullivan5449 16 күн бұрын
Same Here Ty
@bretsampson5980
@bretsampson5980 22 күн бұрын
So, I'm struggling get the pro-max to connect. If I hold the boot while connect to the PC then release> The PC makes the usual tone of a device connecting, but then when I open SocToolKit no usb device is shown next to USB in the menu> Also no red light is flashing on the LuckFox Pro-MAX, but if I just plugin the device without pressing boot the red light flashes> Tried different computers and different cables. Any help would be great
@GameConsolefish
@GameConsolefish 22 күн бұрын
Have you remove the SD card while press hold boot
@李思量
@李思量 22 күн бұрын
Is 9.60 okay??
@GameConsolefish
@GameConsolefish 22 күн бұрын
PS4 9.6 cannot use ESP32 9.6 should use PPPWN
@DaOnlyOneHere
@DaOnlyOneHere 23 күн бұрын
Hopefully karo next fingers crossed
@GameConsolefish
@GameConsolefish 23 күн бұрын
I have already try karo when upload files always hang do u have idea ??
@Lateralus800
@Lateralus800 23 күн бұрын
Hey man, thanks for the tutorial. Unfortunately im still not able to reset my luckfox pico plus. I got couple of questions though if you dont mind. - How long should we press and hold the boot button before connecting to PC? also My pico plus disconnects in about 20 seconds after connecting to PC - When I open the rockchip toolkit, on the USB section it doesnt show Maskrom 373, its just blank and when I press Download, it only shows "No found any device". What am i doing wrong here? Thanks in advance
@GameConsolefish
@GameConsolefish 23 күн бұрын
Press and hold connect to PC then release I think at least 2 seconds. If it cannot show Maskrom 373 it cannot detect do your usb cable allow both data / power ? try this usb cable with a phone if it can show the photo album then data ok
@Lateralus800
@Lateralus800 23 күн бұрын
@@GameConsolefish alright. I'll try that and feedback later. Thank you so much for quick response!
@Lateralus800
@Lateralus800 23 күн бұрын
man it worked! thank you so much!!!!
@GameConsolefish
@GameConsolefish 23 күн бұрын
@@Lateralus800 I remember u cannot get connect luckfox to PC Can you tell me what have you done to success connect PC
@GameConsolefish
@GameConsolefish 23 күн бұрын
@@Lateralus800 Please give me Comment、Like、Share
@rex2ducky837
@rex2ducky837 23 күн бұрын
Hi will this work using Luckfox Pico Mini A RV1103?
@GameConsolefish
@GameConsolefish 23 күн бұрын
Yes it will work too
@rex2ducky837
@rex2ducky837 23 күн бұрын
@@GameConsolefish thanks for the response
@Sadiq.i.hussein11
@Sadiq.i.hussein11 23 күн бұрын
When i connect my luckfox pico pro/max to the computer it connects via ethernet for a while then it automatically disconnect , can you please help me ?
@GameConsolefish
@GameConsolefish 23 күн бұрын
Remove the SD card / reflash the luckfox to default with usb connect to PC
@ControVerde
@ControVerde 24 күн бұрын
Yo, be honest, is this legit?
@Jin-Hu
@Jin-Hu 24 күн бұрын
Great little guide, so I assume that I need to just keep the ESP32 device live nearby, does it have to be connected to the computer or just powered?
@GameConsolefish
@GameConsolefish 24 күн бұрын
You need connect to PS4 with USB port for inject the file
@gideonbarral8088
@gideonbarral8088 24 күн бұрын
bro, how to troubleshoot if luckfox is not detected in PC?
@GameConsolefish
@GameConsolefish 24 күн бұрын
reonnect it / turn off anti virus protection / flash to factory default
@Sadiq.i.hussein11
@Sadiq.i.hussein11 23 күн бұрын
⁠​⁠@@GameConsolefishhow to flash to factory default ? I have the same problem it connects then disconnect after a while
@GameConsolefish
@GameConsolefish 23 күн бұрын
@@Sadiq.i.hussein11 I have other video for reset it to factory default kzfaq.info/get/bejne/fdRgl8qDtt-7Z2g.html
@fernandofldndlw
@fernandofldndlw 24 күн бұрын
Thanks, very good.
@GameConsolefish
@GameConsolefish 18 күн бұрын
Glad you liked it!
@TheOfficialboyps
@TheOfficialboyps 25 күн бұрын
It's not a full method. I've tried but i couldn't get root@Luckfox access on mobiax
@DaOnlyOneHere
@DaOnlyOneHere 25 күн бұрын
Would this work on the karo version? The one im using sadly doesnt have an admin to update files
@GameConsolefish
@GameConsolefish 25 күн бұрын
Can you give me karo Link download Let me test it for u
@DaOnlyOneHere
@DaOnlyOneHere 25 күн бұрын
@@GameConsolefish it doesnt seem to have a admin site i can try to find the other one
@DaOnlyOneHere
@DaOnlyOneHere 25 күн бұрын
@@GameConsolefish kzfaq.info/get/bejne/edKcnZmqqc7FZqM.htmlsi=Np2UBSzYc7qgWfJx i used the modded warefare esps video as a guide
@DaOnlyOneHere
@DaOnlyOneHere 25 күн бұрын
@@GameConsolefish i used the moddes warefare esps as guid he might have the files in his description but i cant seem to link them here in the comments
@GameConsolefish
@GameConsolefish 25 күн бұрын
@@DaOnlyOneHere ok I try the modded warfare esp32 later
@sigma-kinggaming5593
@sigma-kinggaming5593 25 күн бұрын
Using Raspberry pi zero 2 w with usb to ethernet port, 8/10 tries it goes to kernal panic and shuts down
@GameConsolefish
@GameConsolefish 25 күн бұрын
at the 4:58 time in the menu change the following options check firmware version use the originalipv6 address if y then N / if N then Y
@harishbhailive3162
@harishbhailive3162 26 күн бұрын
We can do this to Android phone?
@GameConsolefish
@GameConsolefish 25 күн бұрын
I have not try the android pppwn method yet
@sigma-kinggaming5593
@sigma-kinggaming5593 26 күн бұрын
Do we have to copy ppwn folder to the sd card ? Because when the codes are writing in putty it shows directory not found
@GameConsolefish
@GameConsolefish 26 күн бұрын
U can ignore the error First time run the folder do not exist Git clone.... Will make the folder
@FF_AlohaEdition
@FF_AlohaEdition 26 күн бұрын
Github says it rpi 4 and 5 can pass through the console usb port. Does that mean no need to plug the ethernet?
@GameConsolefish
@GameConsolefish 26 күн бұрын
Point-to-Point Protocol over Ethernet (PPPoE) Ethernet connect is a must The pass through is for inject Goldhen
@GameConsolefish
@GameConsolefish 27 күн бұрын
Just leave it 5 Most of the setting can change later
@sigma-kinggaming5593
@sigma-kinggaming5593 27 күн бұрын
Is it OK to keep the timeout value to 1 min or leave it 5 min ?
@silentdenizen6903
@silentdenizen6903 28 күн бұрын
links bro. we need links.
@GameConsolefish
@GameConsolefish 28 күн бұрын
NAND flash no SD card version luckfox setting kzfaq.info/get/bejne/qbmXgpiHzb7SeHk.html SD card version luckfox setting kzfaq.info/get/bejne/Z5dmf7Kezde0Y4U.html PPPoE setting for PS4 PPPwn kzfaq.info/get/bejne/pZqYYLZ22Kuxkp8.html
@silentdenizen6903
@silentdenizen6903 28 күн бұрын
@@GameConsolefish why are you showing me youtube videos instead of the download links for the programs and files shown in your video? Smh
@GameConsolefish
@GameConsolefish 28 күн бұрын
@@silentdenizen6903 This only demo how it work The link in other video setup for luckfox
@pepegotera6147
@pepegotera6147 28 күн бұрын
Awesome with the new nand flash installation.
@igniz366
@igniz366 Ай бұрын
Question bro, can this be done for 6.70 & also do i still need to download the update.pup file for version 6.70 & then do this or this can skip this step
@GameConsolefish
@GameConsolefish Ай бұрын
firmware darthsternie.net/ps4-firmwares/ darksoftware.xyz/PS4/FWlist I have not try the 6.70 before many information about jailbreakable PS4 firmware is only 5.05 / 6.72 / 9.0-11 wololo.net/ps4-jailbreak-ps4-cfw4dummies/ if you need to update you must update manually with USB drive exfat or fat32 USB drive PS4\UPDATE\PSUPDATE.PUP