LUMIX S1 S1R S1H S5 S5ii S5IIX GUIDE / FULL MENU WALKTHROUGH

LUMIX S1 S1R S1H S5 S5ii S5IIX GUIDE / FULL MENU WALKTHROUGH - Part 2 Video

Рет қаралды 10,234

Күн бұрын

Videos Mentioned down below
Photo Menu Walkthrough
• LUMIX S1 S1H S1R S5 S5...
Favorite Color Profiles in Video
• The Best Color Profile...
16-35mm F4 Video
• PANASONIC LUMIX S PRO ...
- GEAR I USE -
- MAIN CAMERAS -
Lumix S1H - amzn.to/2V4nyIi
Lumix S1 - amzn.to/39VyzzT
- LENSES I LIVE OFF OF -
Lumix 24-105mm F4 - amzn.to/2SXOQgK
Artisans 7- 55mm F1.4 - On B&H only I believe
Sigma 85mm F1.4 - amzn.to/2T0jmGR
Lumix 24-70mm F2.8 - amzn.to/2V7cVEA
Lumix 16-35mm F4 - amzn.to/2wAZp1R
- BALLER ON A BUDGET VERSION OF MY GEAR -
Main Camera - goo.gl/FcW3qm
Beauty Lens - goo.gl/9EvzGw
Mic - goo.gl/TeGwuu
Drone - goo.gl/QunCKS
Bendy Tripod - goo.gl/ZH6nHH
- JUST HAVE A PHONE? -
Lenses I use for my phone - goo.gl/J9CdZE
Tiny Tripod - goo.gl/8un2ad
Tiny Bendy Tripod - goo.gl/ZR2fkX
- ALL THE SOCIAL MEDIA THINGS -
FACEBOOK - / devonmpwilliams
INSTAGRAM - / devonmpwilliams
TWITTER - / aroamingdevon
WEBSITE - www.devonwilliams.net/

Пікірлер: 29

@alexly9178 6 ай бұрын

You are the best of all camera settings. Thank you sir. God bless you all.

@TranscendMediaProduction 2 жыл бұрын

The 16-1023 setting is for broadcast luminance range, so if you're wanting full luminance range you would want to set it to 0-255. V-log forces it to 0-255 by default.

@zfyhwcm 10 күн бұрын

So helpful! Thank you!

@phileezor 2 жыл бұрын

Thanks a lot just got my S5 a couple of days ago.

@TheVlakkie 2 жыл бұрын

This was a good video thank you.

@rbeditzz 2 жыл бұрын

Thanks man ♥️

@aofx6952 10 ай бұрын

very good thank you !!

@SmolikDavidColor Жыл бұрын

CreativeVideo Combined Set. are actually really useful settings. They allow to keep some setting separate in video and photo mode. For example you can set your Standard picture profile for your photos, but once you switch the camera to video it can switch to V-Log. Same for shutter speed, WB, etc.

@fatherofbirds Жыл бұрын

Thanks for sharing!

@douglashunter5703 Жыл бұрын

Thanks for posting this, I found it helpful. While I was watching I figured out that The reason flicker decrease was greyed out is that you had the shutter angle set to 180. If you turn that off then flicker decrease is active. They must be two different ways of achieving similar results. Also, since I switch back and forth between stills and video on the same shoot I find the CreativeVideo Combined set very helpful as I use, very different settings for stills and video.

@melbango1 2 жыл бұрын

Thank you so much.

@fatherofbirds 2 жыл бұрын

Welcome :)

@REERERERERER Жыл бұрын

Hey thanks for the video! on my S5 when using shutter Angle and then going back to Manual photo mode it stays at shutter angle instead of switching to shutter speed like you showed us! is there any workaround or something that i might be missing?

@magnusgotander3954 2 жыл бұрын

To sprawling and fiery to follow. Take it easy pleace.

@jcproductions007 Жыл бұрын

Hi, what happens when I have filmed in two different frame rates, one in 4k 25fps, one in 4k 50fps ? I would like to include both in the same timeline, so what timeline frame rate speed do I select at the beginning when creating a new project and what output speed do I select to make sure it plays correctly, and plays both normal motion and and slow motion ? Total beginner, cheers.

@mamumonkan 7 ай бұрын

Could someone here please answer this: Question #1: How do you map the RED FOCUSING LIGHT to a CUSTOM BUTTON ? Question #2 : How do you switch off " PLEASE USE THE FLASH" in iA ( idiot) mode ?

@ichalmajor Жыл бұрын

Hello, I have a question. does the lumix s1 camera have a menu to change the language? For example, I want to buy a Japanese version of the Lumix S1 camera, can I change the language to English? Thank you

@fatherofbirds Жыл бұрын

Yes, I forget the menu setting but you defiantly can.

@obishal2599 2 жыл бұрын

I don't have NTSC/PAL switch option on my S1. Please help me

2 жыл бұрын

I also lost this option after a firmware update, but it's not really an issue because all the video formats/frame rates are anyway available in the dedicated menu