Lumpy2 FAIL, Giant Spruce, it's big, it's a really big log and it's on the sawmill.

Рет қаралды 621,842

Жыл бұрын

This is the monster log I was calling Lumpy's sticky bottom. It is a giant spruce log, you would not believe what I went thru to get this log back home let alone up on the sawmill. The video starts off with yea a fail or two.. Wait till you see this thing on the LT15wide sawmill, woodmizer would be proud! Sawmilling slabs out of this turned out amazing.

Пікірлер: 137

@rolfbrunner3016 Ай бұрын

I love to watch the whole process and enjoy to see a wonderfulbtexture of the panels.👍

@rolfbrunner3016 Ай бұрын

I love to watch the whole process and enjoy to see the wonderful texture of the panels.👍

@mcsawmill Ай бұрын

Glad you enjoyed it.

@gilbertdelgado6703 Жыл бұрын

That log is breathtakingly beautiful. I can imagine all the uses it can provide!

@petermccuskey1832 Жыл бұрын

Beautiful chunk of lumber.

@sheilamclaughlin963 Жыл бұрын

Great coffee table

@osmanerinc7316 Жыл бұрын

Lines are nice on the wood👍

@discoverykai1547 Жыл бұрын

Your writing is both eloquent and concise.

@deecooper1567 Жыл бұрын

I ❤ the very first piece you cut with the owl face & ET 👀. Throughout the log one can find all different faces/ objects. Just had to sub 👍. 👵🏻👩‍🌾❣️

@discoverykai1547 Жыл бұрын

You have a way of making people feel comfortable and at ease.

@deecooper1567 Жыл бұрын

@@discoverykai1547 Thank you👵🏻👩‍🌾❣️

@fredrobinson6990 Жыл бұрын

I wasn’t sure when I saw the whole log, but the sawed planks are beautiful and unusual.

@discoverykai1547 Жыл бұрын

Your comments are consistently insightful and thought-provoking.

@butchbrown3130 Жыл бұрын

That's some very nice looking wood.

@discoverykai1547 Жыл бұрын

You have a way of making people feel comfortable and at ease.

@BissellMapleFarm Жыл бұрын

I have no idea what you are about to do....but I know I'm going to love it!

@BissellMapleFarm Жыл бұрын

Good episode. That log is a monster!

@discoverykai1547 Жыл бұрын

Your writing is both eloquent and concise.

@t4ng03 Жыл бұрын

Some nice character in that wood

@mcsawmill Жыл бұрын

I try really hard to find special logs.

@melissatuason2395 Жыл бұрын

You WON !!!!

@danielw.hanninen1176 Жыл бұрын

Those knots are especially hard to cut through on any kind of pine. I usually slow my cutting down to keep the cut from waving to much.

@discoverykai1547 Жыл бұрын

Your comments are always so well-researched and informed.

@williamklein6649 Жыл бұрын

I think you will find once dry an planned out you will wish they were thicker. Most slabs should be 10 or 12 quarter. 2 inch slab you will be lucky to get a 1 1/4 thick. With shrinking twisting and cupping. Good luck.

@mcsawmill Жыл бұрын

You are probably right, I've never done this before. But I did cut the good ones at 12 quarter so...

@skipbickford3970 Жыл бұрын

Kind of sad you didn’t cut 3 to 4 inches make some tables tops

@discoverykai1547 Жыл бұрын

Your writing style is engaging and captivating.

@skipbickford3970 Жыл бұрын

Time for an Alaskan mill. Probably a very nice log making lots of nice slabs

@mcsawmill Жыл бұрын

Alaskan mills are for young guys lol... That said I wish I knew someone who has one cause I have an even bigger logs to saw.

@discoverykai1547 Жыл бұрын

You have a way of making people feel comfortable and at ease.

@discoverykai1547 Жыл бұрын

good video

@discoverykai1547 Жыл бұрын

Your comments are a testament to your intelligence and creativity.

@davep3768 Жыл бұрын

Cut them down the middle, flip the outside edges in, pour epoxy, big ass dining table 12 feet long.

@fricknjeep Жыл бұрын

HI THERE LOTS OF WORK IN THE BIG ONES . GOOD WORK JOHN

@mcsawmill Жыл бұрын

Thanks John, and thanks for the nameplate you made me at the show!

@discoverykai1547 Жыл бұрын

Your comments are consistently insightful and thought-provoking.

@cottonp20 Жыл бұрын

BLADE GUIDES SHOULD BE CLOSER TO THE LOG AND THE BLADE TENSION SHOULD BE CHECKED OFTEN

@discoverykai1547 Жыл бұрын

Your comments always leave me with something to think about.

@michaelbookmiller1156 Жыл бұрын

The 1st little flat Piece you cut off on the right side look like ET

@discoverykai1547 Жыл бұрын

Your comments are a testament to your intelligence and creativity.

@brucewelty7684 10 ай бұрын

You pointed out One serious goof that WM made 2 inches should BE a 2" cut and the exhaust on the operator' side has always been dumb.

@mcsawmill 10 ай бұрын

the 2" should be 2" thing is an adjustment, you move the site up or down to fix that. Sawdust exhaust yea but I check sawdust to determine if my speed is correct so there is that. Also the muffler, and this isn't just woodmizer, woodland Mills too, put a real muffler on these things so we don't need hearing protection. Sawmills are stupid loud, my skidster is 1/10th the noise and it's 60 hp not 25 hp...

@wongndeso_sawmill Жыл бұрын

mantap boss🙏

@markhicks8377 10 ай бұрын

put one strap on each end and pick the log up from the side using both straps

@mcsawmill 10 ай бұрын

Tried that the log was too heavy for the skidsteer to lift it. Just lifting the one side you can see the skidsteer tipping up on 2 wheels.

@anthonybernstein9698 5 ай бұрын

Should have put the log on it's side, that way it wont fall over.

@ethics1017 Жыл бұрын

I have the same mill and the same struggles. No machine. I'm working on a rolling crane so I can roll a log how I want.

@mcsawmill Жыл бұрын

Do you use the hand winch and ramps?

@discoverykai1547 Жыл бұрын

Your writing style is engaging and captivating.

@ethics1017 Жыл бұрын

@@mcsawmill Yes, ramps and a boat winch.

@rebeccaocker4506 Жыл бұрын

I saw that blade go down an then back up

@Melissa-pt2ik Жыл бұрын

Oh wow that’s beautiful

@mcsawmill Жыл бұрын

Wait till you see part 2, the slabs in that video are beyond words.

@discoverykai1547 Жыл бұрын

Your comments are consistently insightful and thought-provoking.

@marangkids Жыл бұрын

selamat bekerja dan selalu berhati-hati dalam bekerja

@mcsawmill Жыл бұрын

Terima kasih selamat mencuba

@davewilson3295 Жыл бұрын

A cross buck would be vary helpful in that situation.

@mcsawmill Жыл бұрын

You mean like a hand saw?

@discoverykai1547 Жыл бұрын

Your comments are a testament to your intelligence and creativity.

@robertseabolt3400 Жыл бұрын

THEY WILL MAKE BEAUTIFUL TABLE TOPS IF FINISHED RIGHT

@discoverykai1547 Жыл бұрын

Your comments are a testament to your intelligence and creativity.

@buggsy5 16 күн бұрын

If the slabs are not flat with a new blade, are you sure the tension is high enough?

@mcsawmill 16 күн бұрын

I always check blade tension, you're right that can easily cause waves.

@vaska.e. Жыл бұрын

ant fighting with a straw😀

@CharlesHayes-uk1xn 20 күн бұрын

😊😊

@o.nmaatje7409 Жыл бұрын

de stam in het midden oppakken et je truck en opheffen en vooruit rijden dan kunt u de stam zo op de zaag machine leggen.

@mcsawmill Жыл бұрын

het blok was te zwaar voor de vrachtwagen

@lukemalinowski3482 Жыл бұрын

It would be nice if you had a LT70 super higrol

@lukemalinowski3482 Жыл бұрын

Is super hydraulic

@discoverykai1547 Жыл бұрын

Your comments are consistently insightful and thought-provoking.

@timothymichaud2442 Жыл бұрын

Try using that strap as a cinch

@thesnoopy1009 Жыл бұрын

Like the look of that first slab at 12:56 mins £25 for it

@mcsawmill Жыл бұрын

I gave that one to my sister in law. Sorry.

@kenread9315 Жыл бұрын

This guy has is a doctor or engineer. Which is your guess?

@mcsawmill Жыл бұрын

Why do you think that?

@michaelbookmiller1156 Жыл бұрын

With all of those hard knots in there that blade's gonna deviate just a tad bit

@discoverykai1547 Жыл бұрын

I admire your ability to see things from multiple perspectives.

@randykirby1460 Жыл бұрын

Once you had it on the stump you should have tied it to the saw

@randykirby1460 Жыл бұрын

It hurts watching you make an easy job so hard

@onehot57 Жыл бұрын

Man all the large wood you cut , you need some bigger equipment!

@mcsawmill Жыл бұрын

lol.. If I had bigger equipment I would be cutting even bigger logs. I like to push the limits. But yea the saw can handle bigger logs than the skidsteer can.

@williamhoward8319 Жыл бұрын

chainsaw works

@felixortizsanchez1354 Жыл бұрын

Muy buen día no hablo el inglés cuánto cuesta el aserradero

@mcsawmill Жыл бұрын

Without the trailer about $9000, With the trailer like in the video about $15000

@randywells4674 Жыл бұрын

Lots of knots lots of un level boards cut thick and plane with Router of planer

@dogwedl1167 Жыл бұрын

🤦‍♀🤦‍♀🤦‍♀🤦‍♀🤦‍♀Gossip on works !?!

@mcsawmill Жыл бұрын

Not sure what you mean?

@jamescampbell7780 Жыл бұрын

Why is the camera operator not helping?

@mcsawmill Жыл бұрын

He didn't video the parts where he helped.

@ionmarinescu9056 Жыл бұрын

@@mcsawmill --1--

@ionmarinescu9056 Жыл бұрын

@randyzapton6424 Жыл бұрын

Where is your safety equipment when you're working around the machine?

@Bryan-yl7mg Жыл бұрын

What all do you use? All he's missing is ear plugs, looks like the dust is blowing away from his face as far as I can tell.

@discoverykai1547 Жыл бұрын

You have a way of making people feel comfortable and at ease.

@user-pd8dv3ok8g Жыл бұрын

В России пилы на лесопилках разрывает на мелкие кусочки от осколков Великой Отечественной войны в стволах...

@mcsawmill Жыл бұрын

Мы находим пули в деревьях, но они мягкие, поэтому лесопилке они не повредят.

@edofstad9675 Жыл бұрын

A shame to waste what could be a very nice grain piece. On a real mill, we could cut that whole thing in less than 10 minutes with two 48 inch circular blades, over and under, powered by 250 horsepower CAT diesel. This was done over 60 years ago on what was considered a portable mill. Oh to be young again.

@mcsawmill Жыл бұрын

Man that's the kind of mill I would LOVE to video!

@discoverykai1547 Жыл бұрын

Your comments always leave me with something to think about.

@thepubliceye Жыл бұрын

I have to ask, why not take a chainsaw and cut the lumps off first?

@mcsawmill Жыл бұрын

The lumps are what make the slabs unique.

@ronbuckner8179 Жыл бұрын

Note to self: They get heavier when you cut them thicker ! Just say'n. Looks like God was on drugs when he made that one.

@josephcernansky1794 Жыл бұрын

with so much knots....it's a great candidate for firewood...except it's not even hardwood! push it over the hill and feed it to the termites!!

@Bryan-yl7mg Жыл бұрын

You ever try to split something with that many knots? Lol, no thanks. I'd rather slab it out, some people pay good money for that crazy looking stuff.

@badgascoupe 11 ай бұрын

Spruce is dimension lumber wood for a reason, thats really just over grown pulp wood.

@shanebehling4552 Жыл бұрын

Cut the lumps off first🤪🤪🤪

@mcsawmill Жыл бұрын

I was really kinda trying not to cut them off but some were just sticking out too far.

@deecooper1567 Жыл бұрын

Lol that was the first thing that popped into my mind 🤪🤭. 👵🏻👩‍🌾❣️

@markhicks8377 10 ай бұрын

you are rigging wrong!!

@mcsawmill 10 ай бұрын

I do a lot of things wrong, still learning.

@lucianobicca3657 Жыл бұрын

Tu conversa demais e trabalha MT devagar

@mcsawmill Жыл бұрын

É verdade, mas meu chefe não se importa.

@micksedunary7304 Жыл бұрын

Totally riddled with advertisements .... shame

@loveliberals-pb9yq Жыл бұрын

music video, no thanks.

@mcsawmill Жыл бұрын

It's one of the few where I added music.

@loveliberals-pb9yq Жыл бұрын

@@mcsawmill Sorry i missed it.

@tommyyoung7569 10 ай бұрын

Do you have any left?

@mcsawmill 10 ай бұрын

Yes, they are still air drying, I think they are around 16% now

@tommyyoung7569 10 ай бұрын

Where are you located and how much for a slab of 2 inch thick

@mcsawmill 10 ай бұрын

@@tommyyoung7569 email me at geg841 at gmail.com. I don't want to put pricing in comments because 10 years from now people will want that price...

@josephferry8591 Жыл бұрын

Tighten the bolt or nut more. Actually pull on the damn ratchet or wrench. 50 or 80 grunt pounds.

@josephferry8591 Жыл бұрын

Better yet run it through a couple times get it hot n expanded the metal of course the blade then immediately tighten it more.

@mcsawmill Жыл бұрын

on the LT15 I'm not sure it's possible to overtighten the blade. I do have some 055 blades on order, really want to try the heavier blades to see if that helps on these wide cuts.

@josephcernansky1794 Жыл бұрын

why don't you work WITH the shape and size of the object and the rest(stump) instead of against it? Duh! Two round stumps...planks on top ....lift each end onto planks....push log onto saw bed....stumps will roll to saw bed...push log off planks....much easier than lifting

@mcsawmill Жыл бұрын

you mean put the plank from the stump to the saw?

@discoverykai1547 Жыл бұрын

Your writing style is engaging and captivating.

@haroldcraver9697 Жыл бұрын

Take your saw cut lumps off make flat spot

@alwiggy4707 Жыл бұрын

If you had another brain cell to go with the one that you already maybe you could rub them together to generate a thought. Then you might of solved the problem in next to no time.

@mcsawmill Жыл бұрын

If I make it look easy nobody would watch... Would you?

@mrt1151 Жыл бұрын

@@mcsawmill You're so lucky! It's obvious that some of us don't have that one brain cell to begin with... 🤔

@Bryan-yl7mg Жыл бұрын

*might have