A screw fell out during church so I figured I would open this pedal up and show you how simple it is to repair or fix.
Пікірлер: 55
@UdobiMusic8 жыл бұрын
Can't even hear anything with all that music sheesh
@ninomojo3 жыл бұрын
Yeah, it's interesting that a video related to music making has a shitty mix. It happens.
@paulmayerpiano5 жыл бұрын
Dude, seriously, kill the background music. Just do another take, please.
@siaseeds89508 жыл бұрын
The music is a bit much.
@AdamLue7 жыл бұрын
I second that emotion! LOL too much sauce.
@GR1ZL1E8 жыл бұрын
I was about to throw this pedal away, then I sudden thought, "why not ask KZfaq?"... and sure enough, loose screws with one almost falling out. Now it's all fixed thanks to you. Bless you bro :)
@jethri9 жыл бұрын
Perfect video, completely restored my pedal. Both screws had fallen out and were rattling around inside; I thought the pedal was broken but found this video and had it back to perfect in minutes! Thanks for taking the time to record and post this!
@christopherhansen3378 жыл бұрын
Great video! Ran into this vid while looking for something else and I remembered that my pedal seemed to be getting a bit loose. After I watched this I opened it up and sure enough, the screw had almost worked its way out completely! Thanks!
@andrewthomas53484 жыл бұрын
I was able to fix a problem on the same model pedal. This one had a detached wire, and I did not know where to reattach it. But I was able to figure that out by observing the video. Thanks!
@haterswillwalk4 жыл бұрын
Pretty wild that you would put that loud ass music in the background but can't front this video helped me fix my pedal...
@michaelelijah1238 жыл бұрын
Thanks, I've been buying pedals with the warranty for years and they all have this problem. I just return them. I just repaired two pedal today. Oh happy day!
@KiteFlyingRobot3 жыл бұрын
My god, man. Not sure what hurts more, my ears from the ridiculously loud music, or my eyes from the out of focus video.
@naktank3 жыл бұрын
I've just bought it and it has an issue after a few weeks. I appreciate that. Thank You Mate. All the best.
@AceFurley Жыл бұрын
You can always replace the old rubber contact covers with the rubber button covers from an old tv remote/ etc. they are almost identical, and will work as long as they fit over the contact, and the height is the same (which they do approx. 95% of the time).
@songsthatlast8 жыл бұрын
That was my problem as well. Put the screw back in & It's good as new now! Thanks!
@lbjmuzic9 жыл бұрын
Thanx brother, i lost the screw ,i thought it wasn't from the pedal...lol any idea how to get another one....
@audiorackcompany44686 жыл бұрын
Very useful except the music!
@kemy67753 жыл бұрын
Just stumbled into this. I should’ve known. I still have one and the screws inside were long gone.
@JBdoesit8 жыл бұрын
You're the real MVP
@vinzbrain4 жыл бұрын
fixed mine! did't quite get what the problem was but I cut the black wire somewhat after the loop and re-soldered white and red. works now. Good video except for the music. Very bizarre choice.
@paulraphaelgomes49088 жыл бұрын
thank u bro.. u saved my day.
@Kevin-bn2fz6 жыл бұрын
The silicone contact switches are not glued on. They have 4 anchors that push through the circuit board. i have 2 of these pedals that didn't work and tested the 4 contacts individually by hand. I swapped out a bad one (using a paper clip to CAREFULLY push the anchors through the board. I still have one pedal that doesn't work but these switches are hard to find....DOES ANYBODY KNOW WHERE TO BUY RECLAIMED OR NEW M-AUDIO (or Livewire) CONTACT SWITCHES?
@purlofgreatprice12 ай бұрын
Why did your background music get louder and louder? I couldn't hear what you said.
@BillMurrayWutang4 жыл бұрын
It worked thank you.
@kerylmcjohnson95377 жыл бұрын
I have soldering issues. The second sensor on the "cap" of the pedal (the one with the M-Audio logo) has two contacts for the two white wires (one with red writings and one with red markings). I don't know which one should go where. They both fell out
@NeglectedField8 жыл бұрын
I took mine apart, inspected wiring, seemed ok. Did a mixture of pressing my finger against the grey contact (well it's orange on mine but whatever) and pressing the metal contact against it. Sometimes worked, sometimes didn't. Same when I sat it on its side. Reckon the contact board itself has deterioriated?
@MatthewFogleMusic8 жыл бұрын
Awesome! Thanks
@BarryWarne4 жыл бұрын
an odd design - essentially two "aftertouch" channel pressure pads from a keyboard, ramschackeled onto circuit board chunks from the shop flow, couple wires and done.
@johnbenoit67687 жыл бұрын
I ran into a weird problem... I used a sustain pedal with my m-audio keystation for a few years in till one day I unplugged my sustain pedal to move things around. When I plug my sustain pedal back into the keystation, the keyboard will shut off. Unplug it, keyboard turns back on...
@karldavid31278 жыл бұрын
Help! I have the smaller sustain pedal and is also an M-Audio. There was this switch thing near the cable that connects it to the Keyboard. It got loose and it sank so we decided to open the cover of the pedal. My Dad tried to fix it but the switch was still loose but the sustain pedal stilll does not work. What should I do? Thank You for replying 🙂
@kelcamer6 жыл бұрын
Hello! I am trying to fix my Korg ci9600 pedal. Why do you say if the plastic part falls out to buy a new pedal? Is it totally screwed? Also, how can I connect an older pedal connector to a newer one?
@MrCorynick4 жыл бұрын
Can't hear you over the orchestra
@worntin73428 жыл бұрын
THANK YOU!!!!
@tracychen21068 жыл бұрын
I've checked all the parts you mentioned that may go wrong, they are all fine, but my sustain pedal still not working...
@PSALMSOFSONGS6 жыл бұрын
Tracy Chen-----Same here.
@TheRaxin12467 жыл бұрын
Where does the red wire connect my one broke off :(
@dukeofmacarthur36366 жыл бұрын
Hey guys anyone know where what type of screws those are?
@R2ROrancid8 жыл бұрын
I have an issue with my Sp1 pedal. Works on Sostenuto polarity perfectly, but doesn't send midi signals on Sustain polarity. The strangest part is that if open it up, and press the mechanism with my bare hand on Sustain polarity, it works. But as soon as I put the metal case back on, stops working (only on that polarity) Can anyone help?
@bwillyam4 жыл бұрын
same problem
@TheBakers5Ай бұрын
music too loud mate
@kateskeys Жыл бұрын
Can’t hear you over the music
@Josh-gm3be8 ай бұрын
cant hear you over the music wow
@ministersublett276 жыл бұрын
Background music is very distracting......
@ikechiihemeson60234 жыл бұрын
This is a different model, I took mine apart and it doesn’t look anything like this
@danielbira31864 жыл бұрын
Same here. I think this is the older model of SP2.
@ricardoguarilha81922 жыл бұрын
What?
@muchmuzik56668 жыл бұрын
tanx bredron
@alansaville90033 жыл бұрын
The music in the background ruins the entire video! Way too loud and distracting!
@Muzicprodigy3 жыл бұрын
Music is so loud can’t hear you talking. Would be better without it...
@vendettareynolds59565 жыл бұрын
By
@Humaka013 жыл бұрын
I dont understand why you keep talking i want to hear the music