Thank you mcarbo for the awesome gun video

in case you lose the ball bearing in the safety it is a 1.5mm ball bearing

If you put the frame inside of a plastic bag while disassembling anything with a stout spring or detent it gives you a chance to catch the spring or bearing in case it slips.

Awesome video! Thanks for the love for these tools!

This is definitely the most detailed video that I have found on Taurus take down. I have 2. One of the 3gc' & the 3gc Toro. I live these forearms. I am yet to have any kind of issue with them. They even come with 3 12 round mags. Hard to beat for the price. I am ordering these spring kits for them as well

Make a trigger, I’d definitely buy one!

Video made the installation of the spring kit really easy! Thanks so much!!! And really glad I got the shank tool as well for the sear spring. G3c already has a great trigger but the polish job makes it better.

Great job on your video. Regardless of the topic I was impressed with your ability to demonstrate and communicate clearly. Thanks for the info.

Clear, thorough, and authoritative. You sold me.

Absolutely outstanding walk through. Thank you very much for putting it together.

Good job being patient and detailed so glad I found your channel.. keep up the good work, I just picked up a G3B.

Really thorough tutorial on the take down and disassembly of the G2 and or G3! Thanks This really helped me with the first takedown of my G3, I will be purchasing some spring kits from you guys! Thanks Again for the great video.

You make it look easy. Does anyone else wish it had a de-cocker?

Outstanding video. Articulate, each step superbly explained and demonstrated. Bravo.

Swapping out that plastic striker guide for the stainless steel one from Lakeline LLC also helps a lot on the trigger pull.

Very informative video! Thanks for the video and info!

Great trigger job tutorial, very good footage and description! It gave me the confidence needed to do it myself on my G3. Only one thing I'm wondering: why didn't you replace the striker guide for the Stainless Steel one available?? It's supposed to be superior to the OEM orange plastic one. Thank you very much for such great content!

Lost mine too. Had to send it in. Kinda scared to try it again. Good customer service. Great video. Thanks

Very informative THANK YOU,my G3 moves as i pull the trigger and i wanted to lesson the trigger by about 2 lbs or so,for a smoother one handed pull👍👊

thank you so much excellent video very hard to find this

Yes make a trigger!!

Real good and nice camera work. I replaced my trigger and springs- those pins were REALLY in there and bent my punch good. And the trigger spring was a challenge. Still watching your video to see what you do.

I found a trigger shoe that gets rid of the restrike feature making the trigger travel sooo much better. I wonder what that would do pared with your springs 🤣. I love your spring kits. Got one for my 92 and p320. Keep up the great work man!!!!

This was a great video. It was the cold bucket of water I need to fully understand I need someone else to perform these actions. And while I watched, I daydreamed about "What if Taurus did all this for the finished product? How much better would their products be?" To be clear, I have a G3C and tremendously dislike the trigger - especially when compared to other pistols I own. It tends to get left behind on range days. 😞

Omg no way. That requires a lot of knowledge. Great job. I. Not even close to get to that level.

Definitely interested in a trigger for the g series

My g3 performance is great the only thing I wish y'all would make is a detachable dove tail to stop slide bits

Fantastic video. Totally wanted to see the complete breakdown of the G3 because that's what I have. I was trying to take in all the info that now my head is ready to explode 🤯. I would like to see if there are any different replacement triggers for the G3? Any type of functional mod would be cool to see. I need to see more👍

I would love a new trigger for the G3. The composite trigger feels very mushy.

Can you please make a trigger for the g3 series? I've seen a couple from companies I've never heard of and I'd rather go with people I've heard of and already make amazing kits.

Yes please make a flat faced trigger for this gun. I love the g2c but the trigger isn't my favorite. The trigger and sights are my only real gripes with this gun.

Doing just the polishing will just improve the wall break, but replacing the springs reduces trigger pull force by 2 pounds? On an older (1000-2000) g3c makes it sense polishing these parts?

Great video, awesome job! Where did you get your shank tool?

Thank you!!! Only good G3/G2 take down video I've seen. Glock is similar enough but it's good to see the real deal. Also, you and lakeline are the only taurus upgrade places I've found. Taurus is a very popular brand. More folks should take advantage of this market.

If someone told me polishing a few parts would take 2lbs off the trigger pull, I don't think I'd believe them. That black finish really adds resistance.

Good video 💪 hey will a G2S slide fit on a G2C? Thanks!

Do you have spring kits for the tisas px9 gen 3?

Any spring kit for the gx4?

im sure if you make a kit to reduce the pr travel it would sell a lot

What happens if i lost my safety sphere on sear?

Is this good for ammo with hard primers? My only concern is light primer strikes. I have a spring kit from another company and got a couple of light strikes.

Can you make a trigger that would break at 90 degrees instead of all the way back?

Hi, what are the spring differences with the original one?

What I don’t like is how far back the trigger goes before firing

Please make a trigger. Preferably Metal 😎😈🔥🔥🔥🔥🔥🔥🔥🚀

If I mail you my G3 how much to upgrade and polish out the trigger?

I also lost a firing pin safety block SPRING. Where can I go to buy it or a kit? Would love to know. TY

Does it works on Taurus pt111 ?

Guess polimer take downs are not the same as steel frame, on steelframes pins are removed from right to left..

The worst part of this trigger is the way the trigger dingus doesnt completely engage until the rear of the pull creating an awful grittyness right before break. I cant see how this kit will help that what so ever. Then the mirror polish is going to rust on all 4 of those places polished. Its a taurus. Of course its going to rust. At least cold blue the areas you polished.

TH9?

Taking the trigger out is the hardest part. Those pins are the worst.

How can you have an average pull of 3lb 5oz, when none of your pulls was below 3lb 11oz? Your math is not mathing up...

Too complicated for me.

Just fo a trigger kit, glock easier.

Dude. Fingernail clippers are like one dollar.

Homie needs to find some fingernail clippers. Not something people wanna watch for thirty mins

I have used 4 other M*Carbo trigger spring kits on multiple other brands, all with great end results. I installed the kit, along with all the internal polish works in my G3c to end up with 100% light strikes on CCI and Remington factory ammo, plus reloads with WInchester and CCI primers, installed .002" below flush in the case. as was the factory spring. I contacted M*Carbo by email twice with the question of their spring pull weight matching the factory 14lb pull or not? No replies. I ended up installing a Wolf Spring 15 1/2lb spring to resolve the light strikes, but did suffer additional trigger pull. I can't blame M*Carbo for the spring poundage duplication the OEM unit, simply disappointed by lack of communications. This kit did defiantly improve the trigger feeling, and eliminate the songy feel, although a majority sacrificed due to the heavier striker spring I had to install for light strike issues, as in many of these pistols. I purchased and installed a Lakeview steel striker assy, with the same 14lb light strike ending. This kit is an easy install, taking about 30 minutes with polishing procedures, and not difficult at all. My opinion would be, either the internal depth of the striker housing front area or striker overall tip length varies from pistol to pistol, resulting in a large amount of pistols out there with light strike issues. I will continue my investigations and modification efforts to allow installation of the factory 14lb spring and light trigger pull, as was the plan.