Due to YT's political bias, this video is now posted on another video hosting site which allows free speech. I'm moving off YT. Please view the new posting at the link below... rumble.com/vbugnp-m14m1a-deta...
Пікірлер: 116
@F-14_Jockey3 жыл бұрын
Great videos - As a former Marine from the early 70's, we used the M14 in Boot Camp at PI and beyond, now as a civilian I have M1a's from Springfield. I'd say your lube procedure is ok for range work, service M14's would never use that much lube because of attracting grit and jamming. Also if you're shooting in the desert out here in the West don't use any oil... lubriplate the bolt lug track in moderation, and use a dry graphite type lube on everything else.
@jamesbreeden30616 ай бұрын
That's why I always ran my M-16A1 dry unless in a severely wet environment, I would then put a very light coat of CLP but then wipe it off. I never had any issues. I do the same with my M1A Scout.
@patrickmccafferty57965 жыл бұрын
Thank you for this video, sir. I'm brand new to the M1A world, and I plan to tear mine down today. Very helpful.
@Aldamiras3 жыл бұрын
Ty for posting link to rumble.
@donaldduck48673 жыл бұрын
Thank you for the detailed video. I just bought an M1A. You made it so easy to understand. Great job!😎
@Jnb218 жыл бұрын
+tonyben3 I really like your videos and appreciate the time you spend teaching us this stuff. I have wanted an M1A for years and am finally getting to a position where I can buy one and your videos are hugely appreciated.
@bomber194219 жыл бұрын
I noticed this when I was removing the tan paint on my M1A, there is a bolt roller greaser actually on the the receiver itself, just behind the op rod notch.
@oneshoeless9 жыл бұрын
Another awesome video! Thanks Tony.
@dennism4284 Жыл бұрын
Thank you for all your videos , good luck and Happy new year 2023!
@edwardrichard25615 жыл бұрын
Thanks for the great video. Very easy to follow and informative.
@robchesley4591 Жыл бұрын
Don't know what I would do w out your vids my friend.. thanks Ben
@claidemore9 жыл бұрын
Looking forward to the winter/arctic lubrication video. :)
@ehlsparkin95344 жыл бұрын
Great videos, man. I just picked up my first M1A (Socom 16), and definitely plan on getting more, I caught the bug, lol. I like that you go into so much detail, I'd rather have too much info rather than too little. Don't listen to the haters.
@qballgaming9468 жыл бұрын
The spray grease looks like a way easier deal. I totally appreciate the video, sir...
@tonyben38 жыл бұрын
+QballGaming I like it too. The XF-7 products are very good. If you use the spray, use 2 to 3 coats. Tony.
@tomahauk154 жыл бұрын
I’ve found that mobil1 extended service grease works well. Also for the roller, a cleaned out .45 acp case packed with grease works too, just a little bit messier than that tool you had. I leave it sloppy until I cycle it a few times then wipe the excess off. I do love my garand action rifles!
@sw6407 жыл бұрын
Incredible instruction thank you
@dougwilliams446 жыл бұрын
We never shot the M1A being an Army "Tanker". All we had was a stinkin 120mikemike.. ;-) These videos, have inspired me to build my own M1A. I DO wish I could find an "Action Wrench" like his buddy made. I have seen fellow 11B Infantry using the M14 in Iraq. Beleive it or not, with an ACOG on the damn things.. These are great videos. Best on U-Tube. I've picked up a Springer N.M. (barrel & sights) weapon. All I hear are "It's gonna break, Op rod, extractor".. Waste of money!".. Whatever. So, yeah ordered an LRB reciever, TRW bolt etc. Thanks for the videos MARINE! SEMPER Fi!
@gypsymanjeff21844 жыл бұрын
Again .the BEST. MOST IDEAL WAY TO DO THIS ...BY FAR ..THANK YOU AGAIN. YOUR HIRED ILL KEEP YOU AROUND ..
@wildmanjeff429 жыл бұрын
thanks for the video
@davidv.31353 жыл бұрын
I use Lucas heavy duty bearing grease. It works well. Thanks Tony!
@frankwaltrip58077 ай бұрын
Thank you for this video
@jimmyjohnson62322 жыл бұрын
Love this channel
@tartredarrow6 жыл бұрын
Any NLGI Certified grease will work. I would put grease on the spline gears what actually move the sight no question. Gears are subject to sliding friction and you dont want that. The locking teeth that hold the sight in place is similar to the clutch you would find in an electric drill, which is greased. Just make sure the sight is properly tightened.
@Jaffacall32516 жыл бұрын
the old lubriplate grease was replaced with the inception of the M14 with "Plastilube" it is a dark brown colored grease and today is mostly found in the little m1 grease pots, but it's getting hard to find, used to be able to get a 1 pound can for like $10 bucks.
@tony03278 жыл бұрын
VERY WELL DONE
@Whiteshell2049 жыл бұрын
woot new vid ! Thank !
@ferlottes5 жыл бұрын
Merci ! Genial !
@dannygunzz53734 жыл бұрын
If you want to swap bolts do they need to be fitted or are they drop in like ar?
@jeffdunn74745 жыл бұрын
I use “red & tacky” grease by Lucas. I apply it with a brush! Do you recommend that grease?
@user-lq1gi9hv7k6 жыл бұрын
Hey Tony, question; how often does all this need to be done? Would you please make a video on how to adjust the sights when you get a chance?
@mrdmartin8 жыл бұрын
Thanks for the information - nicely done. Every time you say "mmmm k" I think of the counselor from Southpark (Mr. Mackey). BTW, are those ocean waves I hear in the background? (or perhaps simply cars driving by)
@richardturk71624 жыл бұрын
TW 25B is what I use on most all my guns especially belt fed guns.
@rlovell3837 жыл бұрын
Fantastic detailed video. How often do you recommend a full detail strip and lube like you show here?
@tonyben37 жыл бұрын
Once a year or after 1500 rounds.
@Greryman9 жыл бұрын
Great videos. Just a quick question, why is grease the preferred lubricant for the M1A, whereas CLP etc... used on most other firearms?
@parisex45 жыл бұрын
Grease stays where you put it....oil disperses more
@tonyb01648 жыл бұрын
On Parris Island in 1981 I was issued an M16A1 which I know is a totally different beast than the M14/M1A. We were trained to use CLP only, and then only to a minimum so not to trap dirt, sand and grit. Ever since I have used CLP on every firearm I own exclusively, including my M1A, which I have owned since 2003. It was only recently that I began using grease on my M1A and then only because of watching numerous videos on lubrication of this rifle. My only concern is... well.. all that grease does trap dirt grit and sand. Are the tolerances on this rifle such that they accommodate for the grease and grit etc that grease may trap?
@tonyben38 жыл бұрын
+tonyb0164 Yes, they are more forgiving than the M16. You can always go light on the grease too. Lots of people over-grease their rifles.
@tonyb01648 жыл бұрын
Thats right, much tighter tolerances on the M16. I had forgotten that when the M16 first came out it was issued without a cleaning kit because it was supposed to have been "self cleaning." That idiocy caused some lives.
@still.thinkin89978 жыл бұрын
I'd be curious to know this as well. But I would still run the clp based on the environment around your house. Assuming you don't have tons of sand around your house
@Jimbo19207 жыл бұрын
The M1 and M14 (which is based on the M1) both call for grease. CLP is great for cleaning the bore and chamber and to prevent rust in the same. Personally, I use a mild copper solvent on the bore and chamber, run a few dry patches, and then run a patch soaked in CLP for rust prevention. Everything else gets grease. I'd use Plastilube if I could find it, but I can't so I use Tetra grease. Works great.
@edmundcharles52787 жыл бұрын
Right- grease is essentially semi-solid oil that is designed for metal surface consistency and persistency of the ease of metal-to-metal contact. Oil can perform this task, but with less efficiency and with more application vice that of grease. All oils and greases attract dirt, sand, etc.
@cuchulain16473 жыл бұрын
What’s up with the blurr ???
@ArimaKihe18 жыл бұрын
Hey Big Tony! What's your take on Shooter's Choice Hi-tech Grease/FP-10 gun oil for lubrication & MPRO-7 CLP for the barrel?
@tonyben38 жыл бұрын
+ArimaKihe1 It should all work just fine.
@marshallbrumfield Жыл бұрын
@tonyben3 i just bought my first M1a, do you recommend doing this before I take my rifle to the range?
@davetoth97673 жыл бұрын
Really like the video, but the blur spot is a MAJOR setback!
@alpha1k-8 жыл бұрын
9:56 had me rollin
@tommysalami50163 жыл бұрын
Why is there a big square blur in the center of the screen?
@N3FF426 жыл бұрын
What barrel are you using on this lrb? What would you recommend for a battle rifle/ dmr? Thanks
@seth15305 жыл бұрын
Pick up a criterion chrome lined barrel, they are done right and are very accurate.
@leadguitarofmayhem8 жыл бұрын
would Militec-1 work as a all around lubing compound i cant find lubriplate 130-a nor XF-7 near where i live the gun store where i bought my M1A told me its was really good
@tonyben38 жыл бұрын
+Psychog two I'd use a grease if at all possible. Mobil-1 synthetic wheel bearing grease works great! You can find it at any hardware store. Tony.
@motorbikemadness57734 жыл бұрын
Is your gas piston titanium and if so how do you like it? Or is it the one for N.M. ammo? "Proper application of lubrication" - T-shirt logo.
@poormanoutfitters3 жыл бұрын
KZfaq sucks there censoring your video.
@MGRodriguez18 жыл бұрын
What did you use to whiten your serial number, elevation and windage indicators, White Out or Grease Pencil?
@tonyben38 жыл бұрын
+Mario Rodriguez My wife's fingernail polish. I filled in the letters and wiped the excess with a rag and acetone.
@josecanisales34915 жыл бұрын
What brand is that synthetic stock?
@Doc.Holiday5 жыл бұрын
What is you opinion on “breaking in” a new M1A rifle to optimize its accuracy potential by continuously cleaning the barrel in between its first rounds fired. I’m asking this question in concept, not to labor over with a specific procedure. I’m just interested in your and other listeners yes or no opinion. I’ve never done this with any other rifle that I have purchased in my 66 years.
@Simon-talks Жыл бұрын
I think "breaking in" a rifle barrel is nonsense.
@TheSgtk96 жыл бұрын
Good vid, what was the grease used?
@tonyben36 жыл бұрын
XF-7
@TheSgtk96 жыл бұрын
Where did you buy it?
@tonyben36 жыл бұрын
You can purchase it at xf7gungrease.com Tony.
@donaldduck48673 жыл бұрын
Is the piston supposed to stay dry?
@davidcruz86672 жыл бұрын
What's with the grayed-out rectangle in the middle of the video?
@tomlester52914 жыл бұрын
How did you get the sight markings set up? What did you use? I would assume any kind of regular paint wouldn't hold up. I hope someone is still monitoring this LOL
@Simon-talks Жыл бұрын
a white Crayola crayon. Just rub it on and wipe off the excess. Good to go.
@skyblinked7 жыл бұрын
at 11:30 minutes you mention you could have a very, very big problem if you oil or grease the firing pin channel -- what happens ??
@usamachinist4 жыл бұрын
Jammed forward firing pin(due to dried up grease/ dirt accumulation) =full auto, haha!
@sheanthesheep36803 жыл бұрын
Light primer strikes. Oil slows it down with stiction.
@scottreynolds65443 жыл бұрын
What's up with the sensor blur?
@ericyourdan15953 жыл бұрын
What's with the Blurred out action?
@BlackoutPatriot3 жыл бұрын
Sooo. Why is the video blurred
@johnnytoobad29795 жыл бұрын
Correction 1967 Vietnam USMC
@seth15305 жыл бұрын
I use lubriplate milspec 130a grease 😎
@bonefrog79303 жыл бұрын
I guess the blur spot is a recent uTube addition. I’ll save further comment.
@m118lr3 жыл бұрын
DON’T EVEN BOTHER WATCHING THIS VIDEO...THE WHOLE VIDEO IS BLURRED-OUT RIGHT IN THE MIDDLE OF THE PICTURE..!
@christophermercer26322 жыл бұрын
Why is the middle of the screen blurred?
@tonyben32 жыл бұрын
I had it blurred to direct people to the video description that had a link to Rumble. I am shifting my content to Rumble but people don't read the video description and I still get asked why the blur is there. I finally removed the blur. Hopefully I can figure out some way to shift traffic away from the tube.
@huntr4lfe3 жыл бұрын
Why is the whole video visually censored??
@Javaman55143 жыл бұрын
KZfaq is doing that because they don't want you to have info on guns.
@hollisn2deep3 жыл бұрын
Why is there a blur box?
@tonyben33 жыл бұрын
Click on the description. It has a link to the full video in rumble. I’m moving there.
@shuffleup3 жыл бұрын
Why is it blurred?
@tonyben33 жыл бұрын
To direct people to view the description and be redirected to Rumble. I can't edit the video with a message without removing it all together.
@still.thinkin89978 жыл бұрын
Why did you copy right the video? I'm not trying to be rude. I just wanted to know why thought it would be necessary
@tonyben38 жыл бұрын
Because I've already had people try to steal my content for their own personal gain on three separate occasions. I also accept donations, so I opened the video production business so I can expense all my costs, shield myself from lawsuits and report the donations on my taxes. If the IRS audits me, I need to show proof that I'm making videos under my company name and making some sort of income on them. Tony.
@NemoVir7 жыл бұрын
Do lubriplate reallly expire?
@greasy4656 жыл бұрын
Hi Tony, I was getting worried because of the you tube ban on gun videos, I use yours a lot as reference point. Your videos are excellent .Could you please upload these to Full30.com to save them if the ban comes. Thanks, Dave
@tonyben36 жыл бұрын
I've created an account over there and reserved a page. I will move there when they allow me.
@greasy4656 жыл бұрын
Thank You Sir !! I really am glad for this ! Your videos are indispensable.
@Randy_849 ай бұрын
*i run mine completely dry* 😂😂😂
@rob214803 жыл бұрын
To bad KZfaq blocked the image
@fedhater13 жыл бұрын
You tube is blocking your video..
@dfafox2 жыл бұрын
I can't see
@tonyben32 жыл бұрын
Look at the video description
@CHEVYK108 жыл бұрын
wd40???
@bonesrt666 жыл бұрын
Never use WD40 on a firearm.
@fontaineking51584 жыл бұрын
Looks like over kill.
@russellslagle42065 жыл бұрын
anymore greese then covers the surface is a waste and collects sand.